This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator and Heater Hose Kit for Chevy 2008 Corvette LS3 6.2L V8 (Except ZR1) is designed to replace stock OEM rubber radiator hoses and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses and heater hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator and Heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant Radiator and Heater Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Chevy 2008 Corvette LS3 6.2L V8 (Except ZR1) Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849218 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 8 x 8 inches Weight: 6 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator and Heater Hose Kit for Chevy 09-13 Corvette Z06 LS7 7.0L V8 Non-Supercharged is designed to replace stock OEM rubber radiator hoses and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses and heater hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator and Heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant Radiator and Heater Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Chevy 09-13 Corvette Z06 LS7 7.0L V8 Non-Supercharged Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849270 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 8 x 8 inches Weight: 6 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator Hose Kit for Chevy 97-04 Corvette 5.7L LS1 / LS6 V8 (Base and Z06) is designed to replace stock OEM rubber radiator hoses and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator and Heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant hose kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Chevy 97-04 Corvette 5.7L LS1 / LS6 V8 (Base and Z06) Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849393 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 8 x 8 inches Weight: 5 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator and Heater Hose Kit for Ford 04-11 Ranger 4.0L V6 is designed to replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split Radiator and Heater Hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator and Heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. Includes 100% stainless steel liner worm gear clamps for easy installation, which would not cut through the silicone hoses. This product fits Ford 04-11 Ranger 4.0L V6. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator + Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044864747 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator and Heater Hose Kit for Mazda 16-17 MX-5 Miata 2.0L is designed to replace all the stock OEM rubber radiator hoses and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator and heater hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone radiator hose + heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant Radiator and Heater Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Mazda 16-17 MX-5 Miata 2.0L Made with correct bends and curves for perfect fitment. Replace ALL stock OEM rubber Radiator and Heater Hoses (total 8 pcs) which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044861746 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator and Heater Hose Kit for Mazda 99-05 Miata 1.8L is designed to replace stock OEM rubber radiator hoses and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator and heater hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone radiator hose + heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant Radiator and Heater Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Mazda 99-05 Miata 1.8L Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044855073 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 5 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator and Heater Hose Kit for Scion 08-14 iQ 1.3L 4cyl is designed to replace stock OEM rubber radiator hoses and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses and heater hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator and Heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant Radiator and Heater Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Scion 08-14 iQ 1.3L 4cyl Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044855820 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 6 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator and Heater Hose Kit for Toyota 10-14 FJ Cruiser 4.0L V6 is designed to replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split Radiator and Heater Hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator and Heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant Radiator and Heater Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Toyota 10-14 FJ Cruiser 4.0L V6 Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator + Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044858807 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 5 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator and Heater Hose Kit for Toyota 89-92 Pickup 3.0L V6 Left Hand Drive is designed to replace stock OEM rubber radiator hoses and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses and heater hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator and Heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant Radiator and Heater Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Toyota 89-92 Pickup 3.0L V6 Left Hand Drive. This hose kit does NOT include hoses for model equipped with rear heater. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044860565 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 5 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator and Heater Hose Kit for Toyota 89-92 4Runner 3.0L V6 with Rear Heater Left Hand Drive is designed to replace stock OEM rubber radiator hoses and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses and heater hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator and Heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant Radiator and Heater Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Toyota 89-92 4Runner 3.0L V6 with Rear Heater Left Hand Drive. This hose kit does NOT include hoses for model equipped with rear heater. Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Attributes: GTIN: 00648044883915 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 6 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator and Heater Hose Kit for Toyota 89-95 Pickup 22RE Non Turbo EFI Left Hand Drive is designed to replace stock OEM rubber radiator hoses and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses and heater hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator and Heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant Radiator and Heater Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Toyota 89-95 Pickup 22RE Non Turbo EFI Left Hand Drive Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044857299 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 5 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator and Heater Hose Kit for Toyota 93-95 Pickup 3.0L V6 Left Hand Drive is designed to replace stock OEM rubber radiator hoses and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses and heater hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator and Heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant Radiator and Heater Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Toyota 93-95 Pickup 3.0L V6 Left Hand Drive. This hose kit does NOT include hoses for model equipped with rear heater. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044860503 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 5 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator Hose + Heater Hose Kit (8pcs complete set) for BMW 88-92 E30 325i 325is 325ix 2.5L US Spec is designed to replace stock OEM rubber Radiator Hose + Heater Hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator Hose + Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split Radiator Hose + Heater Hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator Hose + Heater Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. Includes 100% stainless steel liner worm gear clamps for easy installation, which would not cut through the silicone hoses. This product fits BMW 88-92 E30 325i 325is 325ix 2.5L US Spec. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hose + Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849003 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 5 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator Hose Kit for Dodge 03-06 Viper SRT-10 8.3L V10 is designed to replace stock OEM rubber radiator hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant Radiator Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Dodge 03-06 Viper SRT-10 8.3L V10 Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849607 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 8 x 8 inches Weight: 5 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator Hose Kit for Dodge 07-10 Viper SRT-10 8.4L V10 is designed to replace stock OEM rubber radiator hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant Radiator Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Dodge 07-10 Viper SRT-10 8.4L V10 Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849751 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 8 x 8 inches Weight: 4 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator Hose Kit for Dodge 10-17 Ram Pickup 5.7L V8 Hemi is designed to replace stock OEM rubber radiator hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. HPS Silicon coolant Radiator Hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Dodge 10-17 Ram Pickup 5.7L V8 Hemi Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849782 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 8 x 8 inches Weight: 5 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator Hose Kit (9pcs complete set) for Mazda 06-14 Miata 2.0L is designed to replace stock OEM rubber Radiator hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split Radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. Includes 100% stainless steel liner worm gear clamps for easy installation, which would not cut through the silicone hoses. This product fits Mazda 06-14 Miata 2.0L. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044854441 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 5 lb

This brand new HPS High Temp 3-ply Reinforced Red Silicone Radiator Hose Kit (10pcs complete set) for Toyota 00-05 MR2 Spyder is designed to replace stock OEM rubber Radiator hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split Radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator Hose Kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. Includes 100% stainless steel liner worm gear clamps for easy installation, which would not cut through the silicone hoses. This product fits Toyota 00-05 MR2 Spyder 1.8L. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044856544 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 5 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-507WB) for 1996-1998 Toyota Tacoma 3.4L V6 offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888330 Brand Name: HPS Performance Add-On HPS Filter: HPS-4297 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-507BL) for 1996-1998 Toyota Tacoma 3.4L V6 offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888309 Brand Name: HPS Performance Add-On HPS Filter: HPS-4297 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-507P) for 1996-1998 Toyota Tacoma 3.4L V6 offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888316 Brand Name: HPS Performance Add-On HPS Filter: HPS-4297 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-507R) for 1996-1998 Toyota Tacoma 3.4L V6 offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888323 Brand Name: HPS Performance Add-On HPS Filter: HPS-4297 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-537WB) for 1999-2005 Mazda Miata 1.8L Non Turbo offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888507 Brand Name: HPS Performance Add-On HPS Filter: HPS-4296 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-537BL) for 1999-2005 Mazda Miata 1.8L Non Turbo offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888477 Brand Name: HPS Performance Add-On HPS Filter: HPS-4296 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-537P) for 1999-2005 Mazda Miata 1.8L Non Turbo offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888484 Brand Name: HPS Performance Add-On HPS Filter: HPS-4296 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-537R) for 1999-2005 Mazda Miata 1.8L Non Turbo offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888491 Brand Name: HPS Performance Add-On HPS Filter: HPS-4296 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-509WB) for 2000-2005 Toyota MR2 Spyder 1.8L offers a free-flowing 2-1/2 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 2-1/2 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889245 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-509BL) for 2000-2005 Toyota MR2 Spyder 1.8L offers a free-flowing 2-1/2 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 2-1/2 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889207 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-509P) for 2000-2005 Toyota MR2 Spyder 1.8L offers a free-flowing 2-1/2 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 2-1/2 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889221 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-509R) for 2000-2005 Toyota MR2 Spyder 1.8L offers a free-flowing 2-1/2 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 2-1/2 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889238 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-503WB) for 2001-2005 Lexus GS430 4.3L V8 offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888293 Brand Name: HPS Performance Add-On HPS Filter: HPS-4297 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-570WB) for 2002-2006 Nissan Altima 2.5L 4Cyl offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included heat shield blocks the hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889672 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-570BL) for 2002-2006 Nissan Altima 2.5L 4Cyl offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included heat shield blocks the hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889641 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-570P) for 2002-2006 Nissan Altima 2.5L 4Cyl offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included heat shield blocks the hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889658 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-570R) for 2002-2006 Nissan Altima 2.5L 4Cyl offers a free-flowing 3 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included heat shield blocks the hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 3 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included heat shield blocks hot air from the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044889665 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-513WB) for 2003-2004 Toyota Matrix XR 1.8L offers a free-flowing 2-3/4 inch mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to increase horsepower, torque and improve throttle response. Does NOT require tuning after the install. Light weight 2-3/4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044888378 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb