HPS Polish Intercooler Pipe 17-106P is a direct replacement for 13-17 Hyundai Veloster 1.6L Turbo factory intercooler pipe. Made from lightweight 2.5? mandrel bent aluminum tubing, the pipe features one piece design which has a smooth, non-turbulent 1-3/4? to 2.5? transition for maximum performance. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced silicone hoses can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler pipe optimize and smooth out the air flow, deliver performance gains in mid-range without re-tuning the ECU. Fits 2013-2017 Hyundai Veloster 1.6L Turbo. Compatible with factory intercooler or aftermarket intercooler with factory outlet angle. 1 piece design deliver smooth and optimized air flow, boost up performance gains in mid-range without re-tuning the ECU. 2-1/2" light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping. Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping. Attributes: GTIN: 00648044892474 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

Built for performance and show, the HPS Polish cold air intake kit (converts into shortram) for 2002-2006 Nissan Altima 2.5L 4Cyl relocates the HPS Performance air filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2002-2006 Nissan Altima 2.5L 4Cyl. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885193 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

Built for performance and show, the HPS Polish cold air intake kit (converts into shortram) for 2003-2004 Toyota Matrix XR 1.8L relocates the HPS Performance air filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2003-2004 Toyota Matrix XR 1.8L. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885070 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

Built for performance and show, the HPS Polish cold air intake kit (converts into shortram) for 2006-2007 Mazda Mazda5 2.3L Non Turbo relocates the HPS Performance air filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2006-2007 Mazda Mazda5 2.3L Non Turbo. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044884912 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

Built for performance and show, the HPS Polish cold air intake kit (converts into shortram) for 2008-2015 Scion xB 2.4L relocates the HPS Performance air filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2008-2015 Scion xB 2.4L. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885032 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

Built for performance and show, the HPS Polish cold air intake kit (converts into shortram) for 2015-2018 Honda Fit 1.5L Manual Trans. relocates the HPS Performance air filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +5.4 Whp horsepower, +5.3 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2015-2018 Honda Fit 1.5L Manual Trans. Fine-tuned by HPS to deliver dyno proven performance gains +5.4 Whp horsepower, +5.3 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885155 Brand Name: HPS Performance Add-On HPS Filter: HPS-4295 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

HPS polish performance air intake kit with heat shield [part number 827-635P] for 2008-2018 Lexus LX570 5.7L V8 offers a free-flowing 4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +12.4 Whp horsepower, +17.6 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2008-2018 Lexus LX570 5.7L V8 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +12.4 Whp horsepower, +17.6 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 4" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884790 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 12 lb

HPS polish performance cold air intake with heat shield [part number 827-603P] for 2014-2018 GMC Sierra 1500 5.3L V8 offers a free-flowing 3.5" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +13 Whp horsepower, +13 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.5" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2014-2018 GMC Sierra 1500 5.3L V8 Bolt-on easy installation, no modification. Does not require tuning. Dyno proven performance gains +13 Whp horsepower, +13 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.5" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884530 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 12 lb

HPS polish performance cold air intake with heat shield [part number 827-634P] for 2015-2018 Ford F150 2.7L Ecoboost Turbo offers a free-flowing 3.5" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +28.8 Whp horsepower, +31.5 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.5" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2015-2018 Ford F150 2.7L Ecoboost Turbo Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +28.8 Whp horsepower, +31.5 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.5" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884752 Brand Name: HPS Performance Add-On HPS Filter: HPS-4298 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

HPS polish intercooler charge pipe cold side (Part# 17-120P) is a simple yet effective performance upgrade for 2017-2020 GMC Sierra 3500HD Duramax 6.6L V8 Diesel Turbo L5P oem restrictive plastic intercooler piping. Enjoy quicker acceleration, improved fuel mileage, easier towing, and increased long-term reliability. Designed completely in Solidworks, this piece was made with ease of installation in mind. Utilizes the factory intercooler quick connect. Two-piece design allows for easier installation while offering flexibility from engine movement. Installation of a tuner is not required. Increase air volume and improve airflow. 3-1/2" Mandrel bent 6061 aluminum tubing with CNC machined billet flange and weld-on bung to connect?the existing auxiliary sensor. The kit also includes HPS signature high temperature 4-ply reinforced silicone coupler and heavy duty 100% stainless steel T-bolt clamps. Easy to follow step-by-step installation manual with clear pictures and instructions to guide the installer throughout the whole process. NOT CARB Complaint. Compatible with?factory intercooler. The product fits 2017-2020 GMC Sierra 3500HD Duramax 6.6L V8 Diesel Turbo L5P. Simple but effective performance upgrade. Increase air volume and improve airflow. 3-1/2" Mandrel bent 6061 aluminum tubing (Two-Pieces Design) with CNC machined billet flange. Easy to install. Includes HPS 4-ply reinforced silicone coupler and heavy duty 100% stainless steel T-bolt clamps. No modification is required during the installation. Does not require re-tuning and will not trigger CEL light 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044892436 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 4 lb

HPS polish intercooler pipe complete Kit (Hot and Cold Side) with high temp 4-ply reinforced silicone hoses is a direct replacement for 2016-2018 Focus RS 2.3L Turbo oem intercooler pipings and rubber hoses. Made from lightweight mandrel bent aluminum tubing (2-1/2" OD for the HOT and COLD side), the charge pipe kit has less bend and better air flow compared to the oem restrictive design. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced silicone hoses with 100% stainless steel t-bolt clamps can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler piping kit optimize and smooth out the air flow, improve throttle response without re-tuning the ECU. Fits 2016-2018 Ford Focus RS 2.3L Turbo. Compatible with oem and aftermarket intercoolers utilizing the factory oem piping. Replace both hot side and cold side stock plastic intercooler piping. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler pipes. Improves throttle response and drivability with straight through 2-1/2" mandrel-bent aluminum tubing. Increases overall internal volume of your turbocharger system and eliminates air flow restrictions. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044880235 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 36 x 12 x 12 inches Weight: 9 lb

HPS Polish Intercooler Pipe Complete Kit (Hot and Cold Side) with black high temp 4-ply reinforced silicone hoses is a direct replacement for 2015-2017 Mustang Ecoboost 2.3L Turbo oem intercooler pipings and rubber hoses. Made from lightweight mandrel bent aluminum tubing (2.5" OD for the HOT side, 2.75" OD for the Cold Side), the charge pipe kit has less bend and better air flow compared to the oem restrictive design. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced black silicone hoses with 100% stainless steel t-bolt clamps can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler piping kit optimize and smooth out the air flow, increase horsepower +17.1 Whp , torque +16.9 Ft/lbs and improve throttle response without re-tuning the ECU. Fits 2015-2017 Ford Mustang Ecoboost 2.3L Turbo. Compatible with oem and aftermarket intercoolers utilizing the factory oem piping. Deliver dyno proven performance gains increase 17.1 Whp horsepower, 16.9 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping (Hot and Cold Side). Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping. Attributes: GTIN: 00648044861357 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

HPS polish intercooler charge pipe hot side is a simple yet effective performance upgrade for 2018 Lexus NX300 2.0L Turbo oem restrictive plastic intercooler piping. Made from lightweight mandrel bent aluminum tubing, the charge pipe kit has less bend and better air flow compared to the oem restrictive design. The bead rolled pipe ends prevent couplers from popping off under boost. The intercooler piping kit optimize and smooth out the air flow, increase horsepower +15 Whp , torque +19 Ft/lbs and improve throttle response without re-tuning the ECU. Fits 2018 Lexus NX300 2.0L Turbo. Simple but effective performance upgrade. Does NOT require re-tuning or modification. Dyno proven performance - increase +15 Whp horsepower, +19 Ft/lbs torque. Reduce turbo lag and improve throttle response. Light weight mandrel-bent aluminum alloy piping replaces the OEM stock restrictive plastic tube. Bead rolled pipe ends prevent couplers from popping off under boost. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044880341 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 3 lb

HPS polish intercooler charge pipe hot side (Part# 17-122P) is a simple yet effective performance upgrade for 2018-2020 Lexus RC300 2.0L Turbo oem restrictive plastic intercooler piping. Made from lightweight mandrel bent aluminum tubing, the charge pipe kit has less bend and better air flow compared to the oem restrictive design. The bead rolled pipe ends prevent couplers from popping off under boost. The intercooler piping kit optimize and smooth out the air flow, increase horsepower +6.6 Whp , torque +9.1 Ft/lbs and improve throttle response without re-tuning the ECU. Fits 2018-2020 Lexus RC300 2.0L Turbo. Simple but effective performance upgrade. Does NOT require re-tuning or modification. Dyno proven performance - increase +6.6 Whp horsepower, +9.1 Ft/lbs torque. Reduce turbo lag and improve throttle response. Light weight mandrel-bent aluminum alloy piping replaces the OEM stock restrictive plastic tube. Bead rolled pipe ends prevent couplers from popping off under boost. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044893020 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

The HPS Performance polish 3" intake charge pipe for the BMW N55B30 engine was designed with one goal in mind, reliability. From our initial analysis on our 2011 BMW 335i test vehicle, we found that the factory charge pipe was manufactured with inferior materials. In just 60k miles, the BMW factory charge pipe began showing its age, with it barely hanging on as the throttle body connector flange had been broken. HPS R&D team reverse engineered the original part to offer a product that ticks all of the boxes; Durability, Performance, and Style. The HPS charge pipe is produced from 6063 aluminum with a billet CNC flange built to last. It has HPS signature high temperature 4-ply reinforced silicone coupler and heavy duty 100% stainless steel T-bolt clamps to connect to the intermediate intercooler pipe. The kit includes a brand new O-ring for the throttle body connector as the original equipment is known to deteriorate over time. HPS turbo charge pipe also includes a 1/8" NPT bung to give you the option of running methanol injection or boost gauges (even nitrous systems). Installation can be completed in under 30 minutes with basic hand tools and does not require permanent modification or ECU reflash. Don?t end up stranded with a broken charge pipe. Replace your old and haggard plastic charge pipe with the HPS Performance Charge Pipe for your N55 powered E8x/E9x vehicle. NOT CARB Complaint. Fits 2013-2015 BMW X1 xDrive35i 3.0L Turbo (N55). Includes a new throttle body connector O-ring, HPS high temp 4-ply reinforced silicone coupler and 100% stainless steel t-bolt clamps. 3" mandrel bent 6061 Aluminum tubing with CNC machined billet flange and 1/8" NPT bung for methanol injection, sensors, and nitrous systems Increased air volume and air flow. Reduce turbo lag and improve throttle response. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Replaces the weak and restrictive factory plastic charge pipe. Does NOT require re-tuning or modification. Attributes: GTIN: 00648044883205 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 4 lb

HPS Polish performance shortram air intake with heat shield for 2001-2005 Lexus IS300 3.0L offers a free-flowing 2.75" mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +9.0 Whp horsepower, +8.1 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory air scoop to direct cold air to the intake for the best cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2001-2005 Lexus IS300 3.0L. Fine-tuned by HPS to deliver performance gains, increase horsepower +9.0 whp, torque +8.1 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 2.75" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Heavy duty powder coated steel heat integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044884455 Brand Name: HPS Performance Add-On HPS Filter: HPS-4296 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

Built for performance and show, the HPS Polish shortram air intake with heat shield for 2002-2005 Honda Civic Si 2.0L offers a free-flowing mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +10.2 Whp horsepower, +7 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2002-2005 Honda Civic Si 2.0L. Fine-tuned by HPS to deliver dyno proven performance gains +10.2 Whp horsepower, +7 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044884011 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

Built for performance and show, the HPS Polish shortram air intake with heat shield for 2006-2007 Mazda Mazda5 2.3L Non Turbo offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2006-2007 Mazda Mazda5 2.3L Non Turbo. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044884172 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

Built for performance and show, the HPS Polish shortram air intake with heat shield for 2003-2006 Honda Accord 2.4L without MAF Sensor offers a free-flowing mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +8.3 Whp horsepower, +7.6 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2003-2006 Honda Accord 2.4L without MAF Sensor . Fine-tuned by HPS to deliver dyno proven performance gains +8.3 Whp horsepower, +7.6 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044884059 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

Built for performance and show, the HPS Polish shortram air intake with heat shield for 2006-2011 Honda Civic 1.8L offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2006-2011 Honda Civic 1.8L. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044884134 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

Built for performance and show, the HPS Polish shortram air intake with heat shield for 2008-2014 Mitsubishi Lancer 2.0L / 2.4L NonTurbo EGR Tube Equipped offers a free-flowing mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +6.9 Whp horsepower, +5.2 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heat shield included in the kit maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2008-2014 Mitsubishi Lancer 2.0L / 2.4L NonTurbo EGR Tube Equipped. Fine-tuned by HPS to deliver dyno proven performance gains +6.9 Whp horsepower, +5.2 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044884097 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

Built for performance and show, the HPS Polish shortram air intake with heat shield for 2011-2017 Chrysler 300C 5.7L V8 except Shaker Hood offers a free-flowing 3.5" mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +11 Whp horsepower, +12.7 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty power coated steel heat shield included in the kit blocks out the heat from the engine and maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.5" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2011-2017 Chrysler 300C 5.7L V8 except Shaker Hood . Fine-tuned by HPS to deliver dyno proven performance gains +11 Whp horsepower, +12.7 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight 3.5" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Heavy duty powder coated steel heat shield blocks out heat from engine and delivers maximum cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044884493 Brand Name: HPS Performance Add-On HPS Filter: HPS-4303 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

Built for performance and show, the HPS Polish shortram air intake with heat shield for 2012-2017 Subaru Legacy 2.5L Non Turbo offers a free-flowing 2.75" mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +8.5 Whp horsepower, +8.3 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty power coated steel heat shield included in the kit blocks out the heat from the engine and maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 2.75" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2012-2017 Subaru Legacy 2.5L Non Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +8.5 Whp horsepower, +8.3 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight 2.75" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Heavy duty powder coated steel heat shield blocks out heat from engine and delivers maximum cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044884417 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 12 inches Weight: 8 lb

HPS polish performance Shortram Air intake with heat shield [part number 827-619P] for 2017-2018 Toyota Corolla iM 1.8L offers a free-flowing 2-3/4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +4.2 Whp horsepower, +3.2 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 2-3/4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance Shortram Air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2017-2018 Toyota Corolla iM 1.8L Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +4.2 Whp horsepower, +3.2 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 2.75" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884646 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

HPS polish performance shortram air intake with heat shield [part number 827-631P] for 2018-2019 Toyota C-HR 2.0L offers a free-flowing 2.5" mandrel-bent aluminum tube cold air induction system designed to improve throttle response and produce dyno proven performance gains +5.9 Whp horsepower, +5.3 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 2.5" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance short ram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2018-2019 Toyota C-HR 2.0L Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +5.9 Whp horsepower, +5.3 Ft/lbs torque and improve throttle response Includes easy to follow instruction, HPS performance air filter, HPS reinforced silicone hoses and stainless steel T-bolt clamps. HPS 2.5" mandrel-bent aluminum pipe along with heavy duty heat shield replaces the stock restrictive air box and optimize the air flow 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044884714 Brand Name: HPS Performance Add-On HPS Filter: HPS-4274 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

HPS polish performance Shortram Air intake with heat shield [part number 827-663P] for 1995-1999 Toyota 4Runner 2.7L offers a free-flowing 3" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +7.0 Whp horsepower, +9.0 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance Shortram Air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 1995-1999 Toyota 4Runner 2.7L Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +7.0 Whp horsepower, +9.0 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, HPS Washable/Reusable Performance High Flow Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044884837 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

Built for performance and show, the HPS Polish shortram air intake for 2003-2007 Honda Accord 3.0L V6 offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2003-2007 Honda Accord 3.0L V6. Fine-tuned by HPS to increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Included air straightener minimize the chance of triggering CEL light. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044884219 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

Built for performance and show, the HPS Polish shortram air intake for 2005-2008 Toyota Corolla 1.8L offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2005-2008 Toyota Corolla 1.8L. Fine-tuned by HPS to increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Included air straightener minimize the chance of triggering CEL light. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044884257 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

Built for performance and show, the HPS Polish shortram air intake for 2008-2012 Honda Accord 2.4L offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2008-2012 Honda Accord 2.4L. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Included air straightener minimize the chance of triggering CEL light. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Fine-tuned by HPS to increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Attributes: GTIN: 00648044883977 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

Built for performance and show, the HPS Polish shortram air intake for 2011-2016 Scion tC 2.5L offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2011-2016 Scion tC 2.5L. Fine-tuned by HPS to increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Included air straightener minimize the chance of triggering CEL light. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044884295 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

Built for performance and show, the HPS Polish shortram air intake for 2012-2015 Honda Civic 1.8L offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2012-2015 Honda Civic 1.8L. Fine-tuned by HPS to increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Included air straightener minimize the chance of triggering CEL light. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044883939 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 6 lb

Built for performance and show, the HPS Polish shortram air intake for 2013-2017 Hyundai Veloster 1.6L Turbo offers a free-flowing mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +5.8 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2013-2017 Hyundai Veloster 1.6L Turbo. Bolt-on easy installation, no modification. Includes easy to follow installation instruction. Dyno proven gains +5.8 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044884578 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

Built for performance and show, the HPS Polish shortram air intake for 1989-1995 Toyota Pickup 22RE 2.4L offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 1989-1995 Toyota Pickup 22RE 2.4L. Fine-tuned by HPS to increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Included air straightener minimize the chance of triggering CEL light. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044884332 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

HPS Red Intercooler Pipe 17-106R is a direct replacement for 13-17 Hyundai Veloster 1.6L Turbo factory intercooler pipe. Made from lightweight 2.5? mandrel bent aluminum tubing, the pipe features one piece design which has a smooth, non-turbulent 2? to 2.5? transition for maximum performance. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced silicone hoses can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler pipe optimize and smooth out the air flow, deliver performance gains in mid-range without re-tuning the ECU. Fits 2013-2017 Hyundai Veloster 1.6L Turbo. Compatible with factory intercooler or aftermarket intercooler with factory outlet angle. 1 piece design deliver smooth and optimized air flow, boost up performance gains in mid-range without re-tuning the ECU. 2-1/2" light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping. Bead rolled pipe ends prevent couplers from popping off under boost. Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping. Attributes: GTIN: 00648044892504 Brand Name: HPS Performance Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 5 lb

Built for performance and show, the HPS Red cold air intake kit (converts into shortram) for 2002-2006 Nissan Altima 2.5L 4Cyl relocates the HPS Performance air filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2002-2006 Nissan Altima 2.5L 4Cyl. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885209 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

Built for performance and show, the HPS Red cold air intake kit (converts into shortram) for 2003-2004 Toyota Matrix XR 1.8L relocates the HPS Performance air filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. All HPS Performance Air Filters are made in the United States and backed by HPS One-Year Limited Warranty. NOT CARB Complaint. This HPS intake is designed for 2003-2004 Toyota Matrix XR 1.8L. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885087 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb