HPS Red performance shortram air intake with heat shield for 2006-2013 Lexus IS250 2.5L V6 offers a free-flowing 3" mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +10.4 Whp horsepower, +13.1 Ft/lbs torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory air scoop to direct cold air to the intake for the best cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2006-2013 Lexus IS250 2.5L V6. Fine-tuned by HPS to deliver performance gains, increase horsepower +10.4 whp, torque +13.1 ft/lbs and improve throttle response; Does NOT require tuning after the install. Light weight 3" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Heavy duty powder coated steel heat integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044886015 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

HPS black performance cold air intake with heat shield [part number 827-622WB] for 2007-2008 GMC Yukon 4.8L 5.3L 6.0L 6.2L V8 offers a free-flowing 4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +16.9 Whp horsepower, +18.5 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2007-2008 GMC Yukon 4.8L 5.3L 6.0L 6.2L V8 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +16.9 Whp horsepower, +18.5 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 4" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044885766 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 11 lb

HPS blue performance cold air intake with heat shield [part number 827-622BL] for 2007-2008 GMC Yukon 4.8L 5.3L 6.0L 6.2L V8 offers a free-flowing 4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +16.9 Whp horsepower, +18.5 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2007-2008 GMC Yukon 4.8L 5.3L 6.0L 6.2L V8 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +16.9 Whp horsepower, +18.5 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 4" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044885797 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 11 lb

HPS polish performance cold air intake with heat shield [part number 827-622P] for 2007-2008 GMC Yukon 4.8L 5.3L 6.0L 6.2L V8 offers a free-flowing 4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +16.9 Whp horsepower, +18.5 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2007-2008 GMC Yukon 4.8L 5.3L 6.0L 6.2L V8 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +16.9 Whp horsepower, +18.5 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 4" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044885780 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 11 lb

HPS red performance cold air intake with heat shield [part number 827-622R] for 2007-2008 GMC Yukon 4.8L 5.3L 6.0L 6.2L V8 offers a free-flowing 4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +16.9 Whp horsepower, +18.5 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2007-2008 GMC Yukon 4.8L 5.3L 6.0L 6.2L V8 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +16.9 Whp horsepower, +18.5 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 4" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044885773 Brand Name: HPS Performance Add-On HPS Filter: HPS-4304 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 11 lb

Built for performance and show, the HPS Black cold air intake kit (converts into shortram) for 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885360 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Built for performance and show, the HPS Blue cold air intake kit (converts into shortram) for 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885391 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Built for performance and show, the HPS Polish cold air intake kit (converts into shortram) for 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885384 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Built for performance and show, the HPS Red cold air intake kit (converts into shortram) for 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2007-2013 Mazda Mazdaspeed 3 2.3L Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +24.3 Whp horsepower, +33.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885377 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Built for performance and show, the HPS Black cold air intake kit (converts into shortram) for 2008-2014 Subaru WRX STI 2.5L Turbo relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +27.1 Whp horsepower, +26.8 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2008-2014 Subaru WRX STI 2.5L Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +27.1 Whp horsepower, +26.8 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885520 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Built for performance and show, the HPS Blue cold air intake kit (converts into shortram) for 2008-2014 Subaru WRX STI 2.5L Turbo relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +27.1 Whp horsepower, +26.8 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2008-2014 Subaru WRX STI 2.5L Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +27.1 Whp horsepower, +26.8 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885551 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Built for performance and show, the HPS Polish cold air intake kit (converts into shortram) for 2008-2014 Subaru WRX STI 2.5L Turbo relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +27.1 Whp horsepower, +26.8 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2008-2014 Subaru WRX STI 2.5L Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +27.1 Whp horsepower, +26.8 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885544 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Built for performance and show, the HPS Red cold air intake kit (converts into shortram) for 2008-2014 Subaru WRX STI 2.5L Turbo relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +27.1 Whp horsepower, +26.8 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2008-2014 Subaru WRX STI 2.5L Turbo. Fine-tuned by HPS to deliver dyno proven performance gains +27.1 Whp horsepower, +26.8 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885537 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Life Cycle Status: Available To Order Emissions : Electronically Announced Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 8 lb

Built for performance and show, the HPS Black cold air intake kit (converts into shortram) for 2008-2012 Honda Accord 2.4L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2008-2012 Honda Accord 2.4L. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885643 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

Built for performance and show, the HPS Polish cold air intake kit (converts into shortram) for 2008-2012 Honda Accord 2.4L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2008-2012 Honda Accord 2.4L. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885667 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

Built for performance and show, the HPS Red cold air intake kit (converts into shortram) for 2008-2012 Honda Accord 2.4L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to increase horsepower, torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2008-2012 Honda Accord 2.4L. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. No modification is required, however, removal of front bumper is necessary during the installation. Attributes: GTIN: 00648044885650 Brand Name: HPS Performance Add-On HPS Filter: HPS-4276 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb

Built for performance and show, the HPS Black cool ram air intake for 2010-2017 Toyota 4Runner 4.0L V6 offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cool ram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2010-2017 Toyota 4Runner 4.0L V6. Fine-tuned by HPS to increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Included air straightener minimize the chance of triggering CEL light. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044886190 Brand Name: HPS Performance Add-On HPS Filter: HPS-4303 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

Built for performance and show, the HPS Blue cool ram air intake for 2010-2017 Toyota 4Runner 4.0L V6 offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cool ram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2010-2017 Toyota 4Runner 4.0L V6. Fine-tuned by HPS to increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Included air straightener minimize the chance of triggering CEL light. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044886220 Brand Name: HPS Performance Add-On HPS Filter: HPS-4303 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

Built for performance and show, the HPS Polish cool ram air intake for 2010-2017 Toyota 4Runner 4.0L V6 offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cool ram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2010-2017 Toyota 4Runner 4.0L V6. Fine-tuned by HPS to increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Included air straightener minimize the chance of triggering CEL light. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044886213 Brand Name: HPS Performance Add-On HPS Filter: HPS-4303 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

Built for performance and show, the HPS Red cool ram air intake for 2010-2017 Toyota 4Runner 4.0L V6 offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cool ram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2010-2017 Toyota 4Runner 4.0L V6. Fine-tuned by HPS to increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Included air straightener minimize the chance of triggering CEL light. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044886206 Brand Name: HPS Performance Add-On HPS Filter: HPS-4303 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

HPS black performance cold air intake with heat shield [part number 827-607WB] for 2010-2015 Chevy Camaro SS 6.2L V8 offers a free-flowing 4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +13.7 Whp horsepower, +14.4 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2010-2015 Chevy Camaro SS 6.2L V8 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +13.7 Whp horsepower, +14.4 Ft/lbs torque and improve throttle response Includes easy to follow instruction, HPS performance air filter, HPS reinforced silicone hoses and stainless steel T-bolt clamps. HPS 4" mandrel-bent aluminum pipe along with heavy duty heat shield replaces the stock restrictive air box and optimize the air flow 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044885841 Brand Name: HPS Performance Add-On HPS Filter: HPS-4301 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 12 lb

HPS blue performance cold air intake with heat shield [part number 827-607BL] for 2010-2015 Chevy Camaro SS 6.2L V8 offers a free-flowing 4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +13.7 Whp horsepower, +14.4 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2010-2015 Chevy Camaro SS 6.2L V8 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +13.7 Whp horsepower, +14.4 Ft/lbs torque and improve throttle response Includes easy to follow instruction, HPS performance air filter, HPS reinforced silicone hoses and stainless steel T-bolt clamps. HPS 4" mandrel-bent aluminum pipe along with heavy duty heat shield replaces the stock restrictive air box and optimize the air flow 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044885872 Brand Name: HPS Performance Add-On HPS Filter: HPS-4301 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 12 lb

HPS polish performance cold air intake with heat shield [part number 827-607P] for 2010-2015 Chevy Camaro SS 6.2L V8 offers a free-flowing 4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +13.7 Whp horsepower, +14.4 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2010-2015 Chevy Camaro SS 6.2L V8 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +13.7 Whp horsepower, +14.4 Ft/lbs torque and improve throttle response Includes easy to follow instruction, HPS performance air filter, HPS reinforced silicone hoses and stainless steel T-bolt clamps. HPS 4" mandrel-bent aluminum pipe along with heavy duty heat shield replaces the stock restrictive air box and optimize the air flow 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044885865 Brand Name: HPS Performance Add-On HPS Filter: HPS-4301 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 12 lb

HPS red performance cold air intake with heat shield [part number 827-607R] for 2010-2015 Chevy Camaro SS 6.2L V8 offers a free-flowing 4" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +13.7 Whp horsepower, +14.4 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 4" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2010-2015 Chevy Camaro SS 6.2L V8 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +13.7 Whp horsepower, +14.4 Ft/lbs torque and improve throttle response Includes easy to follow instruction, HPS performance air filter, HPS reinforced silicone hoses and stainless steel T-bolt clamps. HPS 4" mandrel-bent aluminum pipe along with heavy duty heat shield replaces the stock restrictive air box and optimize the air flow 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044885858 Brand Name: HPS Performance Add-On HPS Filter: HPS-4301 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 28 x 16 x 10 inches Weight: 12 lb

HPS black performance cold air intake with heat shield [part number 827-664WB] for 2012-2018 Jeep Wrangler JK 3.6L V6 offers a free-flowing 3.25" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.25" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2012-2018 Jeep Wrangler JK 3.6L V6 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.25" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044887531 Brand Name: HPS Performance Add-On HPS Filter: HPS-4299 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

HPS blue performance cold air intake with heat shield [part number 827-664BL] for 2012-2018 Jeep Wrangler JK 3.6L V6 offers a free-flowing 3.25" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.25" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2012-2018 Jeep Wrangler JK 3.6L V6 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.25" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044887548 Brand Name: HPS Performance Add-On HPS Filter: HPS-4299 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

HPS polish performance cold air intake with heat shield [part number 827-664P] for 2012-2018 Jeep Wrangler JK 3.6L V6 offers a free-flowing 3.25" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.25" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2012-2018 Jeep Wrangler JK 3.6L V6 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.25" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044887524 Brand Name: HPS Performance Add-On HPS Filter: HPS-4299 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

HPS red performance cold air intake with heat shield [part number 827-664R] for 2012-2018 Jeep Wrangler JK 3.6L V6 offers a free-flowing 3.25" mandrel-bent aluminum tube induction system designed to improve throttle response and produce dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.25" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance cold air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2012-2018 Jeep Wrangler JK 3.6L V6 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +6.1 Whp horsepower, +9.9 Ft/lbs torque and improve throttle response The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. 3.25" mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Does NOT require re-tuning. Heavy duty steel cool air heat shield box, Washable/Reusable HPS Performance Air Filter, HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. Attributes: GTIN: 00648044887555 Brand Name: HPS Performance Add-On HPS Filter: HPS-4299 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

Built for performance and show, the HPS Black shortram air intake with heat shield for 2013-2015 Hyundai Genesis Coupe 3.8L V6 offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2013-2015 Hyundai Genesis Coupe 3.8L V6. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Heavy duty powder coated steel heat shield blocks out heat from engine and delivers maximum cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044886763 Brand Name: HPS Performance Add-On HPS Filter: HPS-4301 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

Built for performance and show, the HPS Blue shortram air intake with heat shield for 2013-2015 Hyundai Genesis Coupe 3.8L V6 offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2013-2015 Hyundai Genesis Coupe 3.8L V6. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Heavy duty powder coated steel heat shield blocks out heat from engine and delivers maximum cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044886794 Brand Name: HPS Performance Add-On HPS Filter: HPS-4301 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

Built for performance and show, the HPS Polish shortram air intake with heat shield for 2013-2015 Hyundai Genesis Coupe 3.8L V6 offers a free-flowing mandrel-bent aluminum tube induction system designed to increase horsepower, torque and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield included in the kit blocks out the heat from engine and maximize the cooling effect. Compare to the cold air intake, HPS short ram cool air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS shortram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2013-2015 Hyundai Genesis Coupe 3.8L V6. Fine-tuned by HPS to deliver performance gains, increase horsepower, torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Heavy duty powder coated steel heat shield blocks out heat from engine and delivers maximum cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044886787 Brand Name: HPS Performance Add-On HPS Filter: HPS-4301 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

HPS black performance shortram air intake with heat shield [part number 827-626WB] for 2013-2017 Honda Accord 3.5L V6 offers a free-flowing 3.5" mandrel-bent aluminum tube cold air induction system designed to improve throttle response and produce dyno proven performance gains +6.5 Whp horsepower, +6.1 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.5" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance short ram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2013-2017 Honda Accord 3.5L V6 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +6.5 Whp horsepower, +6.1 Ft/lbs torque and improve throttle response Includes easy to follow instruction, HPS performance air filter, HPS reinforced silicone hoses and stainless steel T-bolt clamps. HPS 3.5" mandrel-bent aluminum pipe along with heavy duty heat shield replaces the stock restrictive air box and optimize the air flow 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044885728 Brand Name: HPS Performance Add-On HPS Filter: HPS-4298 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

HPS blue performance shortram air intake with heat shield [part number 827-626BL] for 2013-2017 Honda Accord 3.5L V6 offers a free-flowing 3.5" mandrel-bent aluminum tube cold air induction system designed to improve throttle response and produce dyno proven performance gains +6.5 Whp horsepower, +6.1 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.5" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance short ram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2013-2017 Honda Accord 3.5L V6 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +6.5 Whp horsepower, +6.1 Ft/lbs torque and improve throttle response Includes easy to follow instruction, HPS performance air filter, HPS reinforced silicone hoses and stainless steel T-bolt clamps. HPS 3.5" mandrel-bent aluminum pipe along with heavy duty heat shield replaces the stock restrictive air box and optimize the air flow 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044885759 Brand Name: HPS Performance Add-On HPS Filter: HPS-4298 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

HPS polish performance shortram air intake with heat shield [part number 827-626P] for 2013-2017 Honda Accord 3.5L V6 offers a free-flowing 3.5" mandrel-bent aluminum tube cold air induction system designed to improve throttle response and produce dyno proven performance gains +6.5 Whp horsepower, +6.1 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.5" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance short ram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2013-2017 Honda Accord 3.5L V6 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +6.5 Whp horsepower, +6.1 Ft/lbs torque and improve throttle response Includes easy to follow instruction, HPS performance air filter, HPS reinforced silicone hoses and stainless steel T-bolt clamps. HPS 3.5" mandrel-bent aluminum pipe along with heavy duty heat shield replaces the stock restrictive air box and optimize the air flow 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044885742 Brand Name: HPS Performance Add-On HPS Filter: HPS-4298 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

HPS red performance shortram air intake with heat shield [part number 827-626R] for 2013-2017 Honda Accord 3.5L V6 offers a free-flowing 3.5" mandrel-bent aluminum tube cold air induction system designed to improve throttle response and produce dyno proven performance gains +6.5 Whp horsepower, +6.1 Ft/lbs torque while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield blocks out the heat from engine and maximize the cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight 3.5" mandrel-bent aluminum alloy piping replace the stock restrictive air box and optimize the air flow with long lasting durability. HPS performance short ram air intake kit features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2013-2017 Honda Accord 3.5L V6 Bolt-on easy installation. No CEL light. Does not require modification or re-tuning. Dyno proven performance gains +6.5 Whp horsepower, +6.1 Ft/lbs torque and improve throttle response Includes easy to follow instruction, HPS performance air filter, HPS reinforced silicone hoses and stainless steel T-bolt clamps. HPS 3.5" mandrel-bent aluminum pipe along with heavy duty heat shield replaces the stock restrictive air box and optimize the air flow 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044885735 Brand Name: HPS Performance Add-On HPS Filter: HPS-4298 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

Built for performance and show, the HPS Black cold air intake kit (converts into shortram) for 2013-2017 Hyundai Veloster Turbo 1.6L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +8.9 Whp horsepower, +9.4 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2013-2017 Hyundai Veloster Turbo 1.6L. Bolt-on easy installation, no modification. Includes easy to follow installation instruction. Dyno proven gains +8.9 Whp horsepower, +9.4 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Can be converted into shortram intake. HPS Performance high flow air filter is washable and reusable. Attributes: GTIN: 00648044885322 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 7 lb