A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA035 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA038 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Ford Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs rod end, double-adjustable tubular control arms for Mustangs (MTCA052) are TIG-welded using lightweight 4130 Chrome-moly tubing. This design gives you a strong, lightweight control arm that greatly improves performance.BMR Suspension designed the MTCA052 to excel in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The MTCA052s lightweight, yet strong construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs heavy-duty rod ends are designed to solidly link the rearend to the body, eliminate deflection and wasted power. Our rod ends will stand up to high loads of any performance environment, offering all of the bind-free suspension articulation needed for great handling. These are the perfect upgrade for the enthusiast looking to greatly improve performance without NVH levels being a concern. When performance is a must, rely on BMR Suspension!NOTE:No provisions for factory style rear spring. No provisions for factory style rear sway bar.BMR Suspensions MTCA052 Chrome-moly double-adjustable rod end lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-1998 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1998 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1998 Ford Mustang SVT Cobra 1993,1995 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Ford Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs rod end, double-adjustable tubular control arms for Mustangs (MTCA052) are TIG-welded using lightweight 4130 Chrome-moly tubing. This design gives you a strong, lightweight control arm that greatly improves performance.BMR Suspension designed the MTCA052 to excel in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The MTCA052s lightweight, yet strong construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs heavy-duty rod ends are designed to solidly link the rearend to the body, eliminate deflection and wasted power. Our rod ends will stand up to high loads of any performance environment, offering all of the bind-free suspension articulation needed for great handling. These are the perfect upgrade for the enthusiast looking to greatly improve performance without NVH levels being a concern. When performance is a must, rely on BMR Suspension!NOTE:No provisions for factory style rear spring. No provisions for factory style rear sway bar.BMR Suspensions MTCA052 Chrome-moly double-adjustable rod end lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-1998 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1998 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1998 Ford Mustang SVT Cobra 1993,1995 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Fits all 1979-1998 Mustangs;Designed to the factory length;High-durometer internally fluted polyurethane greasable bushings;MIG-welded 1 5/8-inch DOM steel tubing;Dramatically reduces control arms flex;Greatly reduces bushing deflection;Improved Performance with acceptable NVH levels;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-1998 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1998 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1998 Ford Mustang SVT Cobra 1993,1995 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Fits all 1979-1998 Mustangs;Designed to the factory length;High-durometer internally fluted polyurethane greasable bushings;MIG-welded 1 5/8-inch DOM steel tubing;Dramatically reduces control arms flex;Greatly reduces bushing deflection;Improved Performance with acceptable NVH levels;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-1998 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1998 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1998 Ford Mustang SVT Cobra 1993,1995 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

BMR 79-98 Fox Mustang Non-Adj. Lower Control Arms w/ Spherical Bearings - Black Hammertone

BMR 79-98 Fox Mustang Non-Adj. Lower Control Arms w/ Spherical Bearings - Red

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's polyurethane/rod end, on-car adjustable tubular control arms for Fox Body Mustangs (TCA051) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA051 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The TCA051's heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. When performance is a must, rely on BMR Suspension!Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-1998 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1998 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1998 Ford Mustang SVT Cobra 1993,1995 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's polyurethane/rod end, on-car adjustable tubular control arms for Fox Body Mustangs (TCA051) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA051 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The TCA051's heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. When performance is a must, rely on BMR Suspension!Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-1998 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1998 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1998 Ford Mustang SVT Cobra 1993,1995 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's polyurethane/rod end, single-adjustable tubular control arms for Fox body Mustangs (TCA049) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA049 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The TCA049's heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-1998 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1998 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1998 Ford Mustang SVT Cobra 1993,1995 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's polyurethane/rod end, single-adjustable tubular control arms for Fox body Mustangs (TCA049) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA049 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The TCA049's heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-1998 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1998 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1998 Ford Mustang SVT Cobra 1993,1995 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

BMR 82-02 3rd Gen F-Body Chrome Moly Lower Control Arms Non-Adj. (Poly) - Black Hammertone

BMR 82-02 3rd Gen F-Body Chrome Moly Lower Control Arms On-Car Adj. (Poly) - Black Hammertone

BMR 82-02 3rd Gen F-Body Chrome Moly Lower Control Arms On-Car Adj. (Polyurethane) - Red

BMR 82-02 3rd Gen F-Body Double Adj. Chrome Moly Lower Control Arms w/ Rod Ends - Black Hammertone

BMR 82-02 3rd Gen F-Body Double Adj. Chrome Moly Lower Control Arms w/ Rod Ends - Red

BMR 82-02 3rd Gen F-Body Non-Adj. Chrome Moly Lower Control Arms (Polyurethane) - Red

These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. BMR CNC-machined center adjusters allow you to adjust the lower control arms easily without removing them from the car. BMR Suspension designed the TCA002 to work well in street performance, drag race, and road race applications. When performance is a must, rely on BMR Suspension!BMR Suspensions TCA002 on-car-adjustable polyurethane lower control arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Control arm hardware kit RH005 (includes upper and lower control arm hardware - Highly Recommended) is also available.BMR Suspension offers several lower control arm options for Third- and Fourth-Gen GM F-Body vehicles. The BCA001 is a non-adjustable boxed lower control arm with polyurethane bushings. The TCA001 is a non-adjustable tubular lower control arm with polyurethane bushings. These products are recommended when low cost is the primary consideration. The TCA002 and XTCA001 are on-car adjustable with polyurethane bushings on both sides. The MTCA003 is a chrome-moly rod end/rod end lower control arm designed for max performance where NVH is not a concern. The TCA004 is on-car adjustable with polyurethane bushings on one side, and rod ends on the other. This combo gives you great performance with moderate increases in NVH and is great compromise between the TCA002 and MTCA003. The TCA001 and TCA002 are all available in a lightweight, chrome-moly version (MTCA001, and MTCA002).Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1993-2002 Chevrolet Camaro Base 1982-1986 Chevrolet Camaro Berlinetta 1993 Chevrolet Camaro Indianapolis 500 Pace Car 1985-1990 Chevrolet Camaro Iroc-Z 1987 Chevrolet Camaro LT 1989-1992,1996-1997 Chevrolet Camaro RS 1992 Chevrolet Camaro RS Heritage Edition 1982-1987 Chevrolet Camaro Sport 1982-1987,1991-2002 Chevrolet Camaro Z28 1992 Chevrolet Camaro Z28 Heritage Edition 1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car 1998-2002 Chevrolet Camaro Z28 SS 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1982-2002 Pontiac Firebird Base 1989-2002 Pontiac Firebird Formula 1982-1986 Pontiac Firebird S/E 1982-2002 Pontiac Firebird Trans Am 1994 Pontiac Firebird Trans Am GT 1989-1992 Pontiac Firebird Trans Am GTA 1989 Pontiac Firebird Trans Am GTA SE 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. BMR CNC-machined center adjusters allow you to adjust the lower control arms easily without removing them from the car. BMR Suspension designed the TCA002 to work well in street performance, drag race, and road race applications. When performance is a must, rely on BMR Suspension!BMR Suspensions TCA002 on-car-adjustable polyurethane lower control arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Control arm hardware kit RH005 (includes upper and lower control arm hardware - Highly Recommended) is also available.BMR Suspension offers several lower control arm options for Third- and Fourth-Gen GM F-Body vehicles. The BCA001 is a non-adjustable boxed lower control arm with polyurethane bushings. The TCA001 is a non-adjustable tubular lower control arm with polyurethane bushings. These products are recommended when low cost is the primary consideration. The TCA002 and XTCA001 are on-car adjustable with polyurethane bushings on both sides. The MTCA003 is a chrome-moly rod end/rod end lower control arm designed for max performance where NVH is not a concern. The TCA004 is on-car adjustable with polyurethane bushings on one side, and rod ends on the other. This combo gives you great performance with moderate increases in NVH and is great compromise between the TCA002 and MTCA003. The TCA001 and TCA002 are all available in a lightweight, chrome-moly version (MTCA001, and MTCA002).Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1993-2002 Chevrolet Camaro Base 1982-1986 Chevrolet Camaro Berlinetta 1993 Chevrolet Camaro Indianapolis 500 Pace Car 1985-1990 Chevrolet Camaro Iroc-Z 1987 Chevrolet Camaro LT 1989-1992,1996-1997 Chevrolet Camaro RS 1992 Chevrolet Camaro RS Heritage Edition 1982-1987 Chevrolet Camaro Sport 1982-1987,1991-2002 Chevrolet Camaro Z28 1992 Chevrolet Camaro Z28 Heritage Edition 1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car 1998-2002 Chevrolet Camaro Z28 SS 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1982-2002 Pontiac Firebird Base 1989-2002 Pontiac Firebird Formula 1982-1986 Pontiac Firebird S/E 1982-2002 Pontiac Firebird Trans Am 1994 Pontiac Firebird Trans Am GT 1989-1992 Pontiac Firebird Trans Am GTA 1989 Pontiac Firebird Trans Am GTA SE 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

Launching harder, reducing wheel hop, and adding cornering consistency to your Third or Fourth Gen GM F-body is easy with adjustable lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs poly/rod end, on-car adjustable tubular control arms for F-bodies are the ultimate is strength and adjustability. Manufactured from heavy-duty 1-inch, 0.120-inch wall DOM steel tubing, the TCA004 poly/rod end lower control arms nearly eliminate all control arm deflection. TIG-welded chrome-moly tube adapters with a center-mounted adjuster make on-car adjustments simple and easy. Greasable, internally fluted, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushing design allows grease to evenly coat the inner sleeve, keeping grease in the bushing under high loads. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. The other end features zinc-plated, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers.The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft rubber bushings that have massive amounts of deflection and youre left with poor performance. The TCA004s heavy-duty construction and polyurethane bushings combined with heavy-duty rod ends eliminate unwanted deflection, giving you much improved repeatability on the street, starting line, or in the corners. BMRs polyurethane bushings are compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1993-2002 Chevrolet Camaro Base 1982-1986 Chevrolet Camaro Berlinetta 1993 Chevrolet Camaro Indianapolis 500 Pace Car 1985-1990 Chevrolet Camaro Iroc-Z 1987 Chevrolet Camaro LT 1989-1992,1996-1997 Chevrolet Camaro RS 1992 Chevrolet Camaro RS Heritage Edition 1982-1987 Chevrolet Camaro Sport 1982-1987,1991-2002 Chevrolet Camaro Z28 1992 Chevrolet Camaro Z28 Heritage Edition 1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car 1998-2002 Chevrolet Camaro Z28 SS 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1982-2002 Pontiac Firebird Base 1989-2002 Pontiac Firebird Formula 1982-1986 Pontiac Firebird S/E 1982-2002 Pontiac Firebird Trans Am 1994 Pontiac Firebird Trans Am GT 1989-1992 Pontiac Firebird Trans Am GTA 1989 Pontiac Firebird Trans Am GTA SE 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

BMR 82-02 3rd Gen F-Body Xtreme Chrome Moly Lower Control Arms On-Car Adj. (Poly) - Black Hammertone

BMR 82-02 3rd Gen F-Body Xtreme Chrome Moly Lower Control Arms On-Car Adj. (Poly) - Red

BMR 82-02 3rd/4th Gen F-Body Camaro Double Adj. DOM Lower Control Arms Rod Ends - Black Hammertone

BMR 82-02 3rd/4th Gen F-Body Camaro Double Adj. DOM Lower Control Arms Rod Ends - Red

The bushings easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. The rod ends give you bind-free articulation and zero deflection for max performance. These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. BMR CNC-machined center adjusters allow you to adjust the lower control arms easily without removing them from the car. BMR Suspension designed the TCA004 to work well in street performance, drag race, and road race applications. When performance is a must, rely on BMR Suspension!BMR Suspensions TCA004 on-car-adjustable poly/rod end lower control arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Control arm hardware kit RH005 (includes upper and lower control arm hardware - Highly Recommended) is also available.BMR Suspension offers several lower control arm options for Third- and Fourth-Gen GM F-Body vehicles. The BCA001 is a non-adjustable boxed lower control arm with polyurethane bushings. The TCA001 is a non-adjustable tubular lower control arm with polyurethane bushings. These products are recommended when low cost is the primary consideration. The TCA002 and XTCA001 are on-car adjustable with polyurethane bushings on both sides. The MTCA003 is a chrome-moly rod end/rod end lower control arm designed for max performance where NVH is not a concern. The TCA004 is on-car adjustable with polyurethane bushings on one side, and rod ends on the other. This combo gives you great performance with moderate increases in NVH and is great compromise between the TCA002 and MTCA003. The TCA001 and TCA002 are all available in a lightweight, chrome-moly version (MTCA001, and MTCA002).Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1993-2002 Chevrolet Camaro Base 1982-1986 Chevrolet Camaro Berlinetta 1993 Chevrolet Camaro Indianapolis 500 Pace Car 1985-1990 Chevrolet Camaro Iroc-Z 1987 Chevrolet Camaro LT 1989-1992,1996-1997 Chevrolet Camaro RS 1992 Chevrolet Camaro RS Heritage Edition 1982-1987 Chevrolet Camaro Sport 1982-1987,1991-2002 Chevrolet Camaro Z28 1992 Chevrolet Camaro Z28 Heritage Edition 1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car 1998-2002 Chevrolet Camaro Z28 SS 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1982-2002 Pontiac Firebird Base 1989-2002 Pontiac Firebird Formula 1982-1986 Pontiac Firebird S/E 1982-2002 Pontiac Firebird Trans Am 1994 Pontiac Firebird Trans Am GT 1989-1992 Pontiac Firebird Trans Am GTA 1989 Pontiac Firebird Trans Am GTA SE 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

BMR 91-96 B-Body Non-Adj. Extended Length Lower Control Arms (Polyurethane) - Black Hammertone

BMR 91-96 B-Body Non-Adj. Extended Length Lower Control Arms (Polyurethane) - Red

BMR 91-96 B-Body Non-Adj. STD. Length Lower Control Arms (Polyurethane) - Black Hammertone

BMR 91-96 B-Body Non-Adj. STD. Length Lower Control Arms (Polyurethane) - Red

Fits 1991-1996 GM B-body;Extended length;On-car adjustable design;CNC-machined chrome-moly center adjuster;High-durometer internally fluted polyurethane greasable bushings;TIG-welded chrome-moly tube adapters;MIG-welded 1 5/8-inch DOM steel tubing;Dramatically reduces control arms flex;Greatly reduces bushing deflection;Improved Performance with OEM-like NVH levels;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1991-1992 Chevrolet Caprice Base 1991-1996 Chevrolet Caprice Classic 1993-1994 Chevrolet Caprice Classic LS 1991-1993 Chevrolet Caprice Classic LTZ 1994-1996 Chevrolet Impala SS

Fits 1991-1996 GM B-body;Extended length;On-car adjustable design;CNC-machined chrome-moly center adjuster;High-durometer internally fluted polyurethane greasable bushings;TIG-welded chrome-moly tube adapters;MIG-welded 1 5/8-inch DOM steel tubing;Dramatically reduces control arms flex;Greatly reduces bushing deflection;Improved Performance with OEM-like NVH levels;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1991-1992 Chevrolet Caprice Base 1991-1996 Chevrolet Caprice Classic 1993-1994 Chevrolet Caprice Classic LS 1991-1993 Chevrolet Caprice Classic LTZ 1994-1996 Chevrolet Impala SS

The adjustable design allows for fine-tuning of the pinion angle for proper driveline alignment. These are the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions UTCA002-1 on-car adjustable polyurethane upper control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Control arm hardware kit RH004 (includes upper and lower control arm hardware - Highly Recommended) is also available.Application GuideThis Part Fits: Year Make Model Submodel 1991-1992 Chevrolet Caprice Base 1991-1996 Chevrolet Caprice Classic 1993-1994 Chevrolet Caprice Classic LS 1991-1993 Chevrolet Caprice Classic LTZ 1994-1996 Chevrolet Impala SS

The adjustable design allows for fine-tuning of the pinion angle for proper driveline alignment. These are the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions UTCA002-1 on-car adjustable polyurethane upper control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Control arm hardware kit RH004 (includes upper and lower control arm hardware - Highly Recommended) is also available.Application GuideThis Part Fits: Year Make Model Submodel 1991-1992 Chevrolet Caprice Base 1991-1996 Chevrolet Caprice Classic 1993-1994 Chevrolet Caprice Classic LS 1991-1993 Chevrolet Caprice Classic LTZ 1994-1996 Chevrolet Impala SS

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.25-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel plate, deflection is eliminated with A-arms from BMR Suspension. BMR's AA001 Upper A-arms come with new upper ball joints, and greasable, 95-durometer bushings, which add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR's AA001 Upper A-arms reduce weight and eliminate upper A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The means you get a great blend of performance and comfort for street performance, drag race, and handling applications. The AA001s feature a 3 degree improved ball joint angle for lowered cars. These are compatible with all stock components. The non-adjustable design means installation is quick and easy, and once they are bolting, you're ready to go. BMR Suspension AA001 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1993-2002 Chevrolet Camaro Base 1993 Chevrolet Camaro Indianapolis 500 Pace Car 1996-1997 Chevrolet Camaro RS 1993-2002 Chevrolet Camaro Z28 1998-2002 Chevrolet Camaro Z28 SS 1993-2002 Pontiac Firebird Base 1993-2002 Pontiac Firebird Formula 1993-2002 Pontiac Firebird Trans Am 1994 Pontiac Firebird Trans Am GT

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.25-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel plate, deflection is eliminated with A-arms from BMR Suspension. BMR's AA001 Upper A-arms come with new upper ball joints, and greasable, 95-durometer bushings, which add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR's AA001 Upper A-arms reduce weight and eliminate upper A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The means you get a great blend of performance and comfort for street performance, drag race, and handling applications. The AA001s feature a 3 degree improved ball joint angle for lowered cars. These are compatible with all stock components. The non-adjustable design means installation is quick and easy, and once they are bolting, you're ready to go. BMR Suspension AA001 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1993-2002 Chevrolet Camaro Base 1993 Chevrolet Camaro Indianapolis 500 Pace Car 1996-1997 Chevrolet Camaro RS 1993-2002 Chevrolet Camaro Z28 1998-2002 Chevrolet Camaro Z28 SS 1993-2002 Pontiac Firebird Base 1993-2002 Pontiac Firebird Formula 1993-2002 Pontiac Firebird Trans Am 1994 Pontiac Firebird Trans Am GT