$250 to $500

Additional Attributes: GTIN: 00653374979511 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 20 x 15 x 15 inches

For those running high HP applications that depend on the water-methanol for tuning Snow Performance offers direct port water-meth upgrades to directly mount a nozzle into each cylinder. Comes with 6 CYL distribution block, high flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder (Quick-Connect Fittings/High Temp Nylon). NOTE: Nozzles not included and must be purchased separately. Additional Attributes: GTIN: 00653374500999 Add-On Part: SNO-40014; SNO-40040; SNO-40060; SNO-38FIL; SNO-19110 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 7 x 5 x 7 inches

For those running high HP applications that depend on the water-methanol for tuning Snow Performance offers direct port water-meth upgrades to directly mount a nozzle into each cylinder. Comes with 8 CYL distribution block, high flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder (Quick-Connect Fittings/High Temp Nylon). NOTE: Nozzles not included and must be purchased separately. Additional Attributes: GTIN: 00653374501019 Add-On Part: SNO-40014; SNO-40040; SNO-40060; SNO-38FIL; SNO-19110 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 7 x 5 x 7 inches

Additional Attributes: GTIN: 00653374979184 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 20 x 18 x 4 inches

Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler? water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) and vehicles with a positive displacement supercharger looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc. Comes with easy to install quick-connect fittings and 1/4" high temp nylon tubing. Additional Attributes: GTIN: 00653374500036 Add-On Part: SNO-40014; SNO-40040; SNO-40060; SNO-38FIL; SNO-19110 Bottle Color: White Hose Color: Stainless Hose Material: Stainless Braided Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 20 x 5 x 15 inches

Hi-ram Water/Meth injection plate Additional Attributes: GTIN: Add-On Part: SNO-40014; SNO-40040; SNO-40060; SNO-38FIL; SNO-19110 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 18 x 8.75 x 0.75 inches

Snow Performance N54/N55 Direct Port Methanol Injection Plate Only Additional Attributes: GTIN: 00653374978033 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 1 x 20 x 2 inches

The all new VC-50 water methanol injection controller from Snow Performance gives you the benefits of a boost gauge and water methanol controller/fail safe all in one! Heavily loaded, the VC-50 controller comes with built in manifold absolute pressure sensor that proportionality injects more or less water methanol according to boost pressure. Start and full points are adjustable to match what the engine requires. New dual tone 7 color (white, green, blue, red, orange, purple, yellow) OLED screen shows boost, percentage of injection, low level, second stage activation, and fault codes in a bright easy to read screen. Additional Attributes: GTIN: 00653374976909 Add-On Part: SNO-40014; SNO-40040; SNO-40060; SNO-38FIL; SNO-19110 Bottle Color: White Hose Color: Stainless Hose Material: Stainless Braided Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: x x inches

Additional Attributes: GTIN: 00653374976879 Add-On Part: SNO-40014; SNO-40040; SNO-40060; SNO-38FIL; SNO-19110 Bottle Color: White Hose Color: Stainless Hose Material: Stainless Braided Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: x x inches

The stage 3 controller from Snow Performance stands as the most advanced water-methanol injection controller on the planet. Utilizing boost/fuel injector pulse width to command injection, the stage 3 will create a 2D MAP to calculate load of the engine and inject precise amounts of water-methanol exactly when your vehicle needs it. Taking it one step further, the stage 3 commands 2 nozzles independently of one another to ensure exact amounts of water-methanol is injected at all engine load states of the vehicle. If you are looking for the most sophisticated water-meth controller on the market look no further than the Snow Performance Stage 3. Additional Attributes: GTIN: 00653374976893 Add-On Part: SNO-40014; SNO-40040; SNO-40060; SNO-38FIL; SNO-19110 Bottle Color: White Hose Color: Stainless Hose Material: Stainless Braided Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: x x inches

The stage 3 controller from Snow Performance stands as the most advanced water-methanol injection controller on the planet. Utilizing boost/fuel injector pulse width to command injection, the stage 3 will create a 2D MAP to calculate load of the engine and inject precise amounts of water-methanol exactly when your vehicle needs it. Taking it one step further, the stage 3 commands 2 nozzles independently of one another to ensure exact amounts of water-methanol is injected at all engine load states of the vehicle. If you are looking for the most sophisticated water-meth controller on the market look no further than the Snow Performance Stage 3. Additional Attributes: GTIN: 00653374501088 Add-On Part: SNO-40014; SNO-40040; SNO-40060; SNO-38FIL; SNO-19110 Bottle Color: White Hose Color: Stainless Hose Material: Stainless Braided Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: x x inches

Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler? water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) and vehicles with a positive displacement supercharger looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD. Additional Attributes: GTIN: 00653374500043 Add-On Part: SNO-40014-BRD; SNO-40040-BRD; SNO-40060-BRD; SNO-38FIL; SNO-19110 Bottle Color: White Hose Color: Stainless Hose Material: Stainless Braided Material: Stainless Steel Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 20 x 5 x 15 inches

Decrease EGTs and increase HP in your diesel by 65HP+ in the most cost effective water-methanol injection kit on the market! Utilizing a adjustable boost pressure switch and dual nozzles to deliver precise amounts of water-methanol once 30 boost PSI has been reached (Boost Engagement Adjustable, 30 PSI Boost Hobbs Switch Included). Recommended for all high boost and competition diesels looking to increase HP while decreasing EGTs when on heavy throttle. Comes with easy to mount race ready 3QT tank, high flow check valve, quick-connect fittings, 300 PSI UHO Pump, and LED alert system. Additional Attributes: GTIN: 00653374500210 Add-On Part: SNO-40014-BRD; SNO-40040-BRD; SNO-40060-BRD; SNO-38FIL; SNO-19110 Bottle Color: White Hose Color: Stainless Hose Material: Stainless Braided Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 20 x 5 x 15 inches

For those running high HP applications that depend on the water-methanol for tuning Snow Performance offers direct port water-meth upgrades to directly mount a nozzle into each cylinder. Comes with 8 CYL distribution block, high flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder. NOTE: Nozzles not included and must be purchased separately. Additional Attributes: GTIN: 00653374501316 Add-On Part: SNO-40014; SNO-40040; SNO-40060; SNO-38FIL; SNO-19110 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 7 x 5 x 7 inches

Snow Performance 10 Gallon Tank upgrade is designed for all diesel truck owners looking to carry the maximum amount of water-methanol fluid with out hindering bed space. Custom molded to fit in the void area between the truck bed floor and tire well. Comes complete with a high flow Solenoid, screen fitting, custom straps, and 20' of stainless steel braided line. Designed to go 800+ miles while towing. Additional Attributes: GTIN: 00653374500371 Add-On Part: SNO-40014-BRD; SNO-40040-BRD; SNO-40060-BRD; SNO-38FIL; SNO-19110 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 43 x 10 x 20 inches

, Snow Performance 7 Gallon Tank upgrade is available for those looking to maximize the range of their Snow Performance water-methanol diesel injection system in a easy to install package. Comes complete with a high flow Solenoid upgrade, screen fitting, custom anodized straps, and 20' stainless steel braided line. Designed to go 500+ miles while towing (dimensions: 15"L x 18"H x 9"W). Additional Attributes: GTIN: 00653374500395 Add-On Part: SNO-40014-BRD; SNO-40040-BRD; SNO-40060-BRD; SNO-38FIL; SNO-19110 Extened Information: Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 18 x 10 x 16 inches