This 7” tall 360-degree radial flow air filter features a 3-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included performance air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design showcases the air filter and delivers an aggressive intake induction sound. The upper edge of the housing is finished with a trim seal to help protect against performance robbing heat. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2020 Honda Civic EX 2017-2020 Honda Civic EX-L 2017-2018 Honda Civic EX-T 2017-2020 Honda Civic LX 2017-2020 Honda Civic Si 2017-2020 Honda Civic Sport 2018-2020 Honda Civic Sport Touring 2017-2020 Honda Civic Touring

This 7” tall 360-degree radial flow air filter features a 3-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included performance air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design showcases the air filter and delivers an aggressive intake induction sound. The upper edge of the housing is finished with a trim seal to help protect against performance robbing heat. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2020 Honda Civic EX 2017-2020 Honda Civic EX-L 2017-2018 Honda Civic EX-T 2017-2020 Honda Civic LX 2017-2020 Honda Civic Si 2017-2020 Honda Civic Sport 2018-2020 Honda Civic Sport Touring 2017-2020 Honda Civic Touring

Large Five Layer Performance Air Filter: This 7 IN tall 360-degree radial flow air filter features a 3-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle's hood is closed. It utilizes the vehicle's OE air inlet with no additional hardware. An additional auxiliary air inlet is available for use to bring in air from the front of the vehicle when under power, or can be closed with an included plug if desired.Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2018 Mazda 3 Grand Touring 2014-2016 Mazda 3 s Grand Touring 2014-2016 Mazda 3 s Touring 2017-2018 Mazda 3 Touring

Large 3-Layer Performance Air Filter: This intake system utilizes an oil-free, large 6" tall conical 360 degree radial flow performance air filter with 3-Layer progressively finer porosity synthetic media for maximum convenience. One-Piece Heat Shield: Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation. Mandrel-Bent Tubing: Two Piece 3" Mandrel-Bent Powder-Coated Aluminum Intake Tube directs unrestricted airflow from the massive filter to the turbo for more horsepower and torque. Premium Hardware: Premium hardware and clamp are used to securely mount the high flow air filter and the intake tube.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 Ford Focus RS

Large Five Layer Performance Air Filter: This 360-degree radial flow air filter features a 4" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. It features a Takeda design inspired by import vehicles.One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle's hood is closed. It features an incorporated scoop to capture air from the front of the vehicle.Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. Included billet aluminum fittings allows stock connections to transfer over seamlessly.Installation InstructionsThis Part Fits: Year Make Model Submodel 2019-2022 Hyundai Veloster N Base

The all new Takeda Retain Intake System produces up to 9HP and 9lbs. x ft. of torque over stock, while outflowing the factory intake by 24%. A one-piece powder-coated heat shield is used to protect the filter from unwanted hot engine air for maximum performance. Takeda intakes come complete with all necessary hardware.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2020 Acura TLX Base 2013-2017 Honda Accord EX 2013-2017 Honda Accord EX-L 2013-2017 Honda Accord LX 2013-2017 Honda Accord LX-S 2013-2017 Honda Accord Sport 2017 Honda Accord Sport Special Edition

5" Tall Air Filter: This intake system utilizes a pre-oiled, large 5" tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. High Quality ABS Plastic Heat Shield: aFe developed this high quality ABS plastic heat shield to block unwanted engine heat and eliminating heat soak. High Quality Plastic Red Intake Scoop: This System uses a high quality CAD designed, cross-linked polyethylene Red intake scoop to capture the coolest air while maintaining a perfect fit. Mandrel-Bent Tubing: A one-piece 3" Mandrel-Bent, Wrinkle-Black Powder-Coated Intake Tube directs unrestricted airflow from the large filter to the turbo for more horsepower and torque. Hassle-Free Installation: All clamps, coupling, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.This Part Fits: Year Make Model Submodel 2015-2021 Subaru WRX Base 2015-2021 Subaru WRX Limited 2015-2021 Subaru WRX Premium

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 6” tall 360-degree radial flow air filter features a 4-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet can be used to bring in additional air from the engine compartment, or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. It features a Takeda design inspired by import vehicles. Stainless-steel clamps and reinforced silicone couplings are included for strength and durability. Momentum intakes are designed with fewer parts for a fast and easy installation. Included billet aluminum fittings allows stock connections to transfer over seamlessly. To maximize the amount of air going to the this Air Intake System, Takeda Turbo Inlet 59-20002 is available. This Turbo Inlet will remove the air flow restriction of the factory turbo inlet, providing a smooth transition for the air from the Takeda Air Intake tube to the turbo.Installation InstructionsThis Part Fits: Year Make Model Submodel 2022-2025 Hyundai Elantra N Base

Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and convenience. The Pro DRY S air filter requires no oils and cleans with simple soap and water. Takeda intakes come complete with all tubing, filters, couplers and hardware for an easy installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2017 Nissan Altima Base 2013-2018 Nissan Altima S 2013-2018 Nissan Altima SL 2016-2018 Nissan Altima SR 2013-2018 Nissan Altima SV

One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle's hood is closed. It utilizes the vehicle's OE air inlet with no additional hardware. An additional auxiliary air inlet is available for use to bring in air from the front of the vehicle when under power, or can be closed with an included plug if desired.Installation InstructionsThis Part Fits: Year Make Model Submodel 2014-2016 Mazda 3 i Grand Touring 2014-2016 Mazda 3 I Sport 2014-2015 Mazda 3 i SV 2014-2016 Mazda 3 I Touring 2017-2018 Mazda 3 Sport 2017-2018 Mazda 3 Touring

Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and convenience. The Pro DRY S air filter requires no oils and cleans with simple soap and water. Takeda intakes come complete with all tubing, filters, couplers and hardware for an easy installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2020 Lexus GS F Base 2015-2024 Lexus RC F Base 2021-2022 Lexus RC F Fuji Speedway Edition 2020,2023 Lexus RC F Track Edition

A simple 30 minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) . This performance module increases turbo boost, thus Improving vehicle performance and throttle response. This quick and easy plug & play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response. SCORCHER GT modules features In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cabin. aFe SCORCHER GT modules uses high quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which requires no modification to your factory harness. These factory style connectors plug directly into the stock wiring harness connectors and sensors. SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products.Installation InstructionsThis Part Fits: Year Make Model Submodel 2023 Toyota GR Corolla Circuit Edition 2023 Toyota GR Corolla Core 2023 Toyota GR Corolla Morizo Edition

A simple 30 minute install will give you an increase in power. The aFe POWER SCORCHER GT Module includes a high quality case & wire harness with factory style connectors for an easy plug & play installation. The case is equipped with an ON/OFF button and a blue L.E.D. light to indicate when the module is powered up. This performance module connects to and alters Mass Air Flow (MAF) sensor signal. It improves vehicle performance and throttle response. This quick and easy plug & play SCORCHER GT module adds horsepower and torque by altering MAF sensor signal to increase performance and improve vehicle efficiency and throttle response. aFe SCORCHER GT modules uses high quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which requires no modification to your factory harness. These factory style connectors plug directly into the stock wiring harness connectors and sensors. This module comes with a built-in blue L.E.D. light to show the module is powered up and functioning correctly. It can be turned on and off easily thanks to the button on the case. The blue L.E.D. light will be on when the module is powered up. SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products. This SCORCHER GT Module will work with aFe POWER Super Stock Induction System, Takeda Momentum Intake System, Momentum GT Cold Air Intake System, and the Magnum FLOW OE Replacement Air Filter.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2023 Toyota Tacoma Limited 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport

aFe POWER Pro Series deep transmission pan brings performance engineering to the protection of your trucks transmission. This transmission pan has additional capacity for 2 more quarts over stock at the factory line, a magnetic drain plug and a 1/8" NPT port for your temperature sensor. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This transmission pan is constructed out of durable die-cast A356 aluminum with reinforced ribs and a wrinkle black powder-coating for maximum strength and styling.Installation InstructionsThis Part Fits: Year Make Model Submodel 1999-2000,2002-2005 Cadillac Escalade Base 2007-2008 Chevrolet Avalanche LS 2007-2008 Chevrolet Avalanche LT 2007-2008 Chevrolet Avalanche LTZ 1999-2005 Chevrolet Silverado 1500 Base 2004-2006 Chevrolet Silverado 1500 Hybrid 1999-2009,2011 Chevrolet Silverado 1500 LS 1999-2013 Chevrolet Silverado 1500 LT 2007-2009 Chevrolet Silverado 1500 LTZ 2003 Chevrolet Silverado 1500 SS 2002-2013 Chevrolet Silverado 1500 WT 2004-2005 Chevrolet Silverado 1500 Z71 Off-Road 2007 Chevrolet Silverado 1500 Classic Hybrid 2007 Chevrolet Silverado 1500 Classic LS 2007 Chevrolet Silverado 1500 Classic LT 2007 Chevrolet Silverado 1500 Classic SS 2007 Chevrolet Silverado 1500 Classic WT 2000-2001,2006 Chevrolet Suburban 1500 Base 2000-2008 Chevrolet Suburban 1500 LS 2000-2008 Chevrolet Suburban 1500 LT 2007-2008 Chevrolet Suburban 1500 LTZ 2002-2006 Chevrolet Suburban 1500 Z71 2000-2001,2006 Chevrolet Tahoe Base 2000-2009 Chevrolet Tahoe LS 2000-2008 Chevrolet Tahoe LT 2007-2008 Chevrolet Tahoe LTZ 2002-2006 Chevrolet Tahoe Z71 1999 GMC C1500 Sierra SL 1999 GMC C1500 Sierra SLE 1999 GMC C1500 Sierra SLT 2004,2006-2008 GMC Canyon SL 2004,2006-2012 GMC Canyon SLE 2006-2012 GMC Canyon SLT 2006-2012 GMC Canyon WT 2004-2005 GMC Canyon Z71 Fleet 2004-2005 GMC Canyon Z71 SL 2004-2005 GMC Canyon Z71 SLE 2004-2005 GMC Canyon Z85 SL 2004-2005 GMC Canyon Z85 SLE 1999 GMC K1500 Sierra SL 1999 GMC K1500 Sierra SLE 1999 GMC K1500 Sierra SLT 2002-2005 GMC Sierra 1500 Base 2005-2006,2009-2013 GMC Sierra 1500 Denali 2002 GMC Sierra 1500 HT 2005-2006,2009 GMC Sierra 1500 Hybrid 1999-2003,2006-2013 GMC Sierra 1500 SL 1999-2013 GMC Sierra 1500 SLE 1999-2013 GMC Sierra 1500 SLT 2002-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE 2007 GMC Sierra 1500 Classic Denali 2007 GMC Sierra 1500 Classic Hybrid 2007 GMC Sierra 1500 Classic SL 2007 GMC Sierra 1500 Classic SLE 2007 GMC Sierra 1500 Classic SLT 2007 GMC Sierra 1500 Classic WT 1999-2001 GMC Sierra 2500 SL 1999-2001 GMC Sierra 2500 SLE 1999-2001 GMC Sierra 2500 SLT 1999-2004 GMC Sonoma SL 1999-2001 GMC Sonoma SLE 1999-2004 GMC Sonoma SLS 2006 GMC Yukon SL 2000-2009 GMC Yukon SLE 2000-2008 GMC Yukon SLT 2001-2006 GMC Yukon XL 1500 Denali 2007-2008 GMC Yukon XL 1500 SLE 2007-2008 GMC Yukon XL 1500 SLT 2003-2007 Hummer H2 Base

aFe Powers new deep transmission pan brings performance engineering to the protection of your trucks transmission. This transmission pan has additional capacity for 3 to 4 more quarts over stock at the factory line, a magnetic drain plug and a 1/8" NPT port for your temperature sensor. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This transmission pan is constructed out of durable die-cast A380 aluminum with reinforced ribs and a wrinkle black powder-coating for maximum strength and styling.Installation InstructionsThis Part Fits: Year Make Model Submodel 1997-2000 Ford F-150 Base 1995-1996 Ford F-150 Eddie Bauer 2007 Ford F-150 FX2 2005-2007 Ford F-150 FX4 2000-2003,2006-2007 Ford F-150 Harley-Davidson Edition 2001-2003,2005-2007 Ford F-150 King Ranch 1997-2003,2005-2007 Ford F-150 Lariat 1994-1995,1999-2003 Ford F-150 Lightning 1995-1996 Ford F-150 Special 2005-2007 Ford F-150 STX 1994-2007 Ford F-150 XL 1994-2007 Ford F-150 XLT 2004 Ford F-150 Heritage SVT Lightning 2004 Ford F-150 Heritage XL 2004 Ford F-150 Heritage XLT 1997-1999 Ford F-250 Base 1997-1999 Ford F-250 Lariat 1997-1999 Ford F-250 XL 1997-1999 Ford F-250 XLT

aFe POWER Street Series deep transmission pan brings performance engineering to the protection of your trucks transmission. This transmission pan has additional capacity for 2 more quarts over stock at the factory line, a magnetic drain plug and a 1/8" NPT port for your temperature sensor. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This transmission pan is constructed out of durable die-cast A356 aluminum with reinforced ribs and a raw finish with machined accents for maximum strength and styling.This Part Fits: Year Make Model Submodel 1997-2000 Ford F-150 Base 1995-1996 Ford F-150 Eddie Bauer 2007 Ford F-150 FX2 2005-2007 Ford F-150 FX4 2000-2003,2006-2007 Ford F-150 Harley-Davidson Edition 2001-2003,2005-2007 Ford F-150 King Ranch 1997-2003,2005-2007 Ford F-150 Lariat 1994-1995,1999-2003 Ford F-150 Lightning 1995-1996 Ford F-150 Special 2005-2007 Ford F-150 STX 1994-2007 Ford F-150 XL 1994-2007 Ford F-150 XLT 2004 Ford F-150 Heritage SVT Lightning 2004 Ford F-150 Heritage XL 2004 Ford F-150 Heritage XLT 1997-1999 Ford F-250 Base 1997-1999 Ford F-250 Lariat 1997-1999 Ford F-250 XL 1997-1999 Ford F-250 XLT

aFe Power's new deep transmission pan brings performance engineering to the protection of your trucks transmission. This transmission pan has additional capacity for 2 more quarts over stock at the factory line and a magnetic drain plug to capture loos particles. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This transmission pan is constructed out of durable cast aluminum with reinforced ribs and a raw finish with machined accents for maximum strength and styling.This Part Fits: Year Make Model Submodel 2013-2023 Ram 2500 Big Horn 2013-2023 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2013-2021 Ram 2500 Laramie Longhorn 2016-2023 Ram 2500 Limited 2021-2023 Ram 2500 Limited Longhorn 2013-2015,2019-2023 Ram 2500 Lone Star 2013-2016 Ram 2500 Outdoorsman 2023 Ram 2500 Rebel 2013-2018 Ram 2500 SLT 2013 Ram 2500 ST 2013-2023 Ram 2500 Tradesman 2013-2023 Ram 3500 Big Horn 2013-2023 Ram 3500 Laramie 2014-2015 Ram 3500 Laramie Limited 2013-2020 Ram 3500 Laramie Longhorn 2016-2023 Ram 3500 Limited 2021-2023 Ram 3500 Limited Longhorn 2013-2015,2017,2019-2022 Ram 3500 Lone Star 2013-2019 Ram 3500 SLT 2013 Ram 3500 ST 2013-2023 Ram 3500 Tradesman

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Corvette models. This air intake starts with an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system has provisions for the factory mass air sensor, inlet air temperature sensor and crankcase vent tube. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID's No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003 Chevrolet Corvette 50th Anniversary Edition 2003 Chevrolet Corvette 50th Anniversary Edition Pace Car 2001-2004 Chevrolet Corvette Base 2001-2004 Chevrolet Corvette Z06

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Corvette models. This air intake starts with an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system has provisions for the factory mass air sensor, inlet air temperature sensor and crankcase vent tube. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID's No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003 Chevrolet Corvette 50th Anniversary Edition 2003 Chevrolet Corvette 50th Anniversary Edition Pace Car 2001-2004 Chevrolet Corvette Base 2001-2004 Chevrolet Corvette Z06

The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003 Dodge Ram 2500 Laramie 2003-2004 Dodge Ram 2500 SLT 2003-2004 Dodge Ram 2500 ST 2003-2004 Dodge Ram 3500 Laramie 2003-2004 Dodge Ram 3500 SLT 2003-2004 Dodge Ram 3500 ST

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2005 Ford Excursion Eddie Bauer 2003-2005 Ford Excursion Limited 2004-2005 Ford Excursion XLS 2003-2005 Ford Excursion XLT 2004-2007 Ford F-250 Super Duty Harley-Davidson Edition 2004-2007 Ford F-250 Super Duty King Ranch 2003-2007 Ford F-250 Super Duty Lariat 2003-2007 Ford F-250 Super Duty XL 2003-2007 Ford F-250 Super Duty XLT 2004-2007 Ford F-350 Super Duty Harley-Davidson Edition 2003-2007 Ford F-350 Super Duty King Ranch 2003-2007 Ford F-350 Super Duty Lariat 2003-2007 Ford F-350 Super Duty XL 2003-2007 Ford F-350 Super Duty XLT

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2007 Chevrolet Silverado 1500 Classic LT 2007 Chevrolet Silverado 1500 Classic SS 2005 Chevrolet Silverado 1500 HD Base 2005 Chevrolet Silverado 1500 HD LS 2005-2006 Chevrolet Silverado 1500 HD LT 2007 Chevrolet Silverado 1500 HD Classic LT 2005 Chevrolet Silverado 2500 HD Base 2005-2006 Chevrolet Silverado 2500 HD LS 2005-2006 Chevrolet Silverado 2500 HD LT 2005-2006 Chevrolet Silverado 2500 HD WT 2007 Chevrolet Silverado 2500 HD Classic LS 2007 Chevrolet Silverado 2500 HD Classic LT 2007 Chevrolet Silverado 2500 HD Classic WT 2005 Chevrolet Silverado 3500 Base 2005-2006 Chevrolet Silverado 3500 LS 2005-2006 Chevrolet Silverado 3500 LT 2006 Chevrolet Silverado 3500 WT

The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005 Ford F-250 Super Duty Harley-Davidson Edition 2005-2007 Ford F-250 Super Duty King Ranch 2005-2007 Ford F-250 Super Duty Lariat 2005-2007 Ford F-250 Super Duty XL 2005-2007 Ford F-250 Super Duty XLT 2005 Ford F-350 Super Duty Harley-Davidson Edition 2005-2007 Ford F-350 Super Duty King Ranch 2005-2007 Ford F-350 Super Duty Lariat 2005-2007 Ford F-350 Super Duty XL 2005-2007 Ford F-350 Super Duty XLT

The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2007 Chrysler 300 Base 2005-2010 Chrysler 300 Limited 2008-2009 Chrysler 300 LX 2010 Chrysler 300 S 2009 Chrysler 300 Signature Series 2005-2010 Chrysler 300 Touring 2009-2010 Dodge Challenger SE 2006-2007 Dodge Charger Base 2006-2010 Dodge Charger Pursuit 2006-2010 Dodge Charger SE 2006-2010 Dodge Charger SXT 2005-2008 Dodge Magnum SE 2005-2008 Dodge Magnum SXT 2005 Dodge Magnum SXT Special Edition

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems. It delivers high levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. This air intake includes a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID oiled premium air filter for outstanding air flow and filtration. Air is directed through an air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This all adds up to a sophisticated system that increases air flow. This air intake requires custom tuning and is not legal for sale or use in California or in other states adopting California emission standards.Installation InstructionsThis Part Fits: Year Make Model Submodel 2008-2009 Ford Mustang Bullitt 2005-2009 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2009 Ford Mustang Base

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2010 INFINITI QX56 Base 2005-2009 Nissan Armada LE 2010-2015 Nissan Armada Platinum 2005-2010 Nissan Armada SE 2005-2006 Nissan Armada SE Off-Road 2011-2015 Nissan Armada SL 2011-2015 Nissan Armada SV 2010 Nissan Armada Titanium 2004 Nissan Pathfinder Armada LE 2004 Nissan Pathfinder Armada SE 2004-2010 Nissan TITAN LE 2008-2015 Nissan TITAN PRO-4X 2011-2015 Nissan TITAN S 2004-2010 Nissan TITAN SE 2011-2015 Nissan TITAN SL 2011-2015 Nissan TITAN SV 2004-2010 Nissan TITAN XE

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2010 Chrysler 300 C 2005-2010 Chrysler 300 C SRT8 2010 Chrysler 300 S 2009-2010 Dodge Challenger R/T 2008-2010 Dodge Challenger SRT8 2006 Dodge Charger Daytona R/T 2006-2010 Dodge Charger Pursuit 2006-2010 Dodge Charger R/T 2008-2010 Dodge Charger SE 2006-2010 Dodge Charger SRT8 2005-2008 Dodge Magnum R/T 2006-2008 Dodge Magnum SRT8

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2010 Chrysler 300 C 2005-2010 Chrysler 300 C SRT8 2010 Chrysler 300 S 2009-2010 Dodge Challenger R/T 2008-2010 Dodge Challenger SRT8 2006 Dodge Charger Daytona R/T 2006-2010 Dodge Charger Pursuit 2006-2010 Dodge Charger R/T 2008-2010 Dodge Charger SE 2006-2010 Dodge Charger SRT8 2005-2008 Dodge Magnum R/T 2006-2008 Dodge Magnum SRT8

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. Some CAD systems connect onto the factory air intake tube while others utilize a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools and is backed by AIRAID's exclusive No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2006-2010 Dodge Charger SRT8 2008 Dodge Magnum SRT8

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013 Chevrolet Corvette 427 2008 Chevrolet Corvette 427 Limited Edition Z06 2006-2013 Chevrolet Corvette Z06 2011 Chevrolet Corvette Z06 Carbon

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2008-2021 Toyota Sequoia Limited 2021 Toyota Sequoia Nightshade 2008-2021 Toyota Sequoia Platinum 2008-2021 Toyota Sequoia SR5 2020-2021 Toyota Sequoia TRD Pro 2018-2021 Toyota Sequoia TRD Sport 2014-2021 Toyota Tundra 1794 Edition 2007-2013 Toyota Tundra Base 2007-2021 Toyota Tundra Limited 2021 Toyota Tundra Nightshade 2010-2021 Toyota Tundra Platinum 2014-2021 Toyota Tundra SR 2007-2011,2014-2021 Toyota Tundra SR5 2021 Toyota Tundra Trail 2015-2017,2019-2021 Toyota Tundra TRD Pro

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2009-2015 Cadillac CTS V

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2009-2015 Cadillac CTS V

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010-2019 Ford Flex Limited 2010-2013 Ford Flex SE 2010-2017 Ford Flex SEL 2011-2012 Ford Flex Titanium 2010-2017 Ford Taurus SHO 2010-2016 Lincoln MKS EcoBoost 2017,2019 Lincoln MKT Base 2010-2016 Lincoln MKT EcoBoost 2013-2018 Lincoln MKT Limousine 2012,2017-2018 Lincoln MKT Livery 2018-2019 Lincoln MKT Reserve

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. Some CAD systems connect onto the factory air intake tube while others utilize a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools and is backed by AIRAID's exclusive No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010-2019 Ford Flex Limited 2010-2013 Ford Flex SE 2010-2017 Ford Flex SEL 2011-2012 Ford Flex Titanium 2010-2017 Ford Taurus SHO 2010-2016 Lincoln MKS EcoBoost 2017,2019 Lincoln MKT Base 2010-2016 Lincoln MKT EcoBoost 2018-2019 Lincoln MKT Reserve