This aFe POWER 76mm Throttle Body and adapter kit improves engine air flow over the stock 65mm throttle body. The extra air flow will increase horsepower and throttle response. This kit will work with OEM or aFe cold air intakes. Performance gains will be more noticeable as more upgrades are added to the vehicle. All adapters are constructed from 6061-T6 billet aluminum and are precision machined for light weight, high strength, and perfect fit and finish. The Serrated/Swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel creating a more complete combustion cycle increasing horsepower, torque and improving throttle response. This aFe POWER 76mm throttle body kit uses all factory mounting locations providing stability and a hassle-free installation. All needed hardware is included with the kit. Idle will run high on some vehicles but will readjust once the ECU learns to properly control the idle (this can take up to 800 miles on some vehicles).Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2009 Toyota 4Runner Limited 2003-2009 Toyota 4Runner Sport 2003-2009 Toyota 4Runner SR5 2007-2009 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2005-2013 Toyota Tacoma X-Runner 2005-2011 Toyota Tundra Base 2005-2011 Toyota Tundra SR5

This aFe POWER 76mm Throttle Body and adapter kit improves engine air flow over the stock 70mm throttle body. The extra air flow will increase horsepower and throttle response. This kit will work with OEM or aFe cold air intakes. Performance gains will be more noticeable as more upgrades are added to the vehicle. All adapters are constructed from 6061-T6 billet aluminum and are precision machined for light weight, high strength, and perfect fit and finish. The Serrated/Swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel creating a more complete combustion cycle increasing horsepower, torque and improving throttle response. This aFe POWER 76mm throttle body kit uses all factory mounting locations providing stability and a hassle-free installation. All needed hardware is included with the kit. Idle will run high on some vehicles but will readjust once the ECU learns to properly control the idle (this can take up to 800 miles on some vehicles).Installation InstructionsThis Part Fits: Year Make Model Submodel 2023 Toyota 4Runner 40th Anniversary Edition 2010-2024 Toyota 4Runner Limited 2020-2021 Toyota 4Runner Nightshade 2010-2024 Toyota 4Runner SR5 2018-2024 Toyota 4Runner SR5 Premium 2010-2016,2021-2022 Toyota 4Runner Trail 2017-2024 Toyota 4Runner TRD Off-Road 2018-2024 Toyota 4Runner TRD Off-Road Premium 2015-2024 Toyota 4Runner TRD Pro 2022-2024 Toyota 4Runner TRD Sport 2020-2021 Toyota 4Runner Venture 2010-2014 Toyota FJ Cruiser Base 2016-2023 Toyota Tacoma Limited 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2023 Toyota Tacoma Trail Special Edition 2016-2023 Toyota Tacoma TRD Off-Road 2017-2023 Toyota Tacoma TRD Pro 2016-2023 Toyota Tacoma TRD Sport 2011-2013 Toyota Tundra Base 2014 Toyota Tundra SR 2011 Toyota Tundra SR5

Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air inlet. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has a built-in resonance chamber to catch un-wanted air intake noises. Large 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtratio n. This cylindrical filter has a large oval (6-3/4" x 4-3/4") flange and is 7" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a bellow silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2015 Chevrolet Camaro SS

Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to block off the auxiliary air inlet. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded designed intake tube to fit with the stock mechanical fan and achieve maximum power gains while maintaining a perfect fit. Large 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive oval flange and is 9" tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: High quality premium clamps ensures the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2019 Chevrolet Silverado 1500 LD Custom 2019 Chevrolet Silverado 1500 LD LT 2019 Chevrolet Silverado 1500 LD WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT 2019 GMC Sierra 1500 Limited Base 2019 GMC Sierra 1500 Limited SLE

This 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. Our Pro 5R media provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and a premium silicone coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Sport Base 2021-2024 Ford Bronco Sport Big Bend 2024 Ford Bronco Sport Free Wheeling 2023-2024 Ford Bronco Sport Heritage Edition 2021-2024 Ford Bronco Sport Outer Banks 2023-2024 Ford Escape Active 2023 Ford Escape Base 2020-2022 Ford Escape S 2020-2022 Ford Escape SE 2020-2022 Ford Escape SEL 2023-2024 Ford Escape ST-Line

This 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and a premium silicone coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Sport Base 2021-2024 Ford Bronco Sport Big Bend 2024 Ford Bronco Sport Free Wheeling 2023-2024 Ford Bronco Sport Heritage Edition 2021-2024 Ford Bronco Sport Outer Banks 2023-2024 Ford Escape Active 2023 Ford Escape Base 2020-2022 Ford Escape S 2020-2022 Ford Escape SE 2020-2022 Ford Escape SEL 2023-2024 Ford Escape ST-Line

This 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. Our Pro 5R media provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and premium silicone couplings allow for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2024 Ford Bronco Sport Badlands 2021 Ford Bronco Sport First Edition 2023 Ford Bronco Sport Heritage Limited Edition 2023-2024 Ford Escape Platinum 2020-2022 Ford Escape SEL 2023-2024 Ford Escape ST-Line Elite 2023-2024 Ford Escape ST-Line Select 2020-2022 Ford Escape Titanium 2022-2025 Ford Maverick Lariat 2022-2025 Ford Maverick XL 2022-2025 Ford Maverick XLT

This 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and premium silicone couplings allow for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2024 Ford Bronco Sport Badlands 2021 Ford Bronco Sport First Edition 2023 Ford Bronco Sport Heritage Limited Edition 2023-2024 Ford Escape Platinum 2020-2022 Ford Escape SEL 2023-2024 Ford Escape ST-Line Elite 2023-2024 Ford Escape ST-Line Select 2020-2022 Ford Escape Titanium 2022-2025 Ford Maverick Lariat 2022-2025 Ford Maverick XL 2022-2025 Ford Maverick XLT

Smooth transitions in the mandrel-bent aluminum pipe decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This charge pipe kit features factory style billet aluminum quick-connect adapter with an O-ring to ensure a leak-free fit while maintaining superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe power logo for a custom look.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2025 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2025 Ford Bronco Big Bend 2021-2024 Ford Bronco Black Diamond 2022-2024 Ford Bronco Everglades 2023-2025 Ford Bronco Heritage Edition 2021-2025 Ford Bronco Outer Banks

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter features a 3.5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, crafted from durable, heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. This innovative design reduces the total number of parts, ensuring quick and easy installation. A clear sight window allows for effortless filter inspection without disassembly. The auxiliary air inlet can draw in extra air from the engine compartment or be closed with the included plug, offering versatility for different driving conditions. This high-quality, computer-designed intake tube is dyno-tuned for maximum power gains and perfect fit. Made from heat-resistant and durable XLPE material, it ensures optimal performance. Stainless-steel clamps are included for strength, and a premium silicone tube is used for durability while also providing the most secure installation available. Black anodized aluminum studs for perfect fit and finish. Takeda intakes are designed with fewer parts for a fast and easy installation. To maximize the amount of air going to the this Air Intake System, Takeda DAS (56-70065S) is available. The Dynamic Air Scoop will remove the air flow restriction of the factory air inlet, providing a smooth transition for the air from behind the grill to the Takeda housing.Installation InstructionsThis Part Fits: Year Make Model Submodel 2023-2025 Toyota GR Corolla Circuit Edition 2023-2025 Toyota GR Corolla Core 2023 Toyota GR Corolla Morizo Edition 2024-2025 Toyota GR Corolla Premium

aFe EGR coolers are constructed from new stainless steel components. All connections are welded, not brazed, to improve reliability. This cooler features 6 thick-wall heat exchanger tubes. These tubes are resistant to clogging, extending the life of the cooler. Our available complete gasket kit includes components for the removal and replacement of the EGR cooler (Part Number: 46-90075).This Part Fits: Year Make Model Submodel 2004-2005 Ford Excursion Eddie Bauer 2004-2005 Ford Excursion Limited 2004-2005 Ford Excursion XLS 2004-2005 Ford Excursion XLT 2004-2007 Ford F-250 Super Duty Harley-Davidson Edition 2004-2007 Ford F-250 Super Duty King Ranch 2004-2007 Ford F-250 Super Duty Lariat 2004-2007 Ford F-250 Super Duty XL 2004-2007 Ford F-250 Super Duty XLT 2004-2007 Ford F-350 Super Duty Harley-Davidson Edition 2004-2007 Ford F-350 Super Duty King Ranch 2004-2007 Ford F-350 Super Duty Lariat 2004-2007 Ford F-350 Super Duty XL 2004-2007 Ford F-350 Super Duty XLT

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2004 Jeep Wrangler Rubicon 1997-2004 Jeep Wrangler Sahara 1997-2004 Jeep Wrangler Sport 2002-2004 Jeep Wrangler X

This 7” tall 360-degree radial flow air filter features a 4" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It connects to the factory air intake tract in the fender well. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. It features a resonance chamber to reduce drone and billet aluminum fittings to perfectly connect your vehicle's vacuum line. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary stainless-steel clamps, flexible bellows coupling, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2019 Chevrolet Corvette Grand Sport 2014-2019 Chevrolet Corvette Stingray

This 7” tall 360-degree radial flow air filter features a 4” round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. The included performance air filter is surrounded by an open-element cross-link polyethylene (XLPE) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It connects to the vehicle’s factory air inlet with no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. A specially designed bellows coupling is included with this kit to ensure the perfect seal and fitment to the factory throttle body.Throttle body spacer 46-31011 will fit with this air intake system. Fits both active and non-active steering.Installation InstructionsThis Part Fits: Year Make Model Submodel 2008-2013 BMW 128i Base 2006 BMW 325i Base 2006 BMW 325xi Base 2007-2013 BMW 328i Base 2009-2013 BMW 328i xDrive Base 2007-2008 BMW 328xi Base 2006 BMW 330i Base 2006 BMW 330xi Base

This 7.5” tall 360-degree radial flow air filter features a 6” x 4" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. Its inverted top makes for more filter surface area, resulting in longer service intervals. This media is perfect for street and/or track use. Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. Once the system is installed, the air filter can be easily removed from the housing for maintenance by uninstalling the intake tube. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing connects to the factory air inlet, using no additional hardware. Its auxiliary air inlet can be used to bring in additional air from the engine compartment, or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. High quality premium clamps and a silicone bellow coupling are used for durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2019 Cadillac XT5 Base 2017-2019 Cadillac XT5 Luxury 2017-2019 Cadillac XT5 Platinum 2017-2023 Cadillac XT5 Premium Luxury 2020-2023 Cadillac XT5 Sport 2019 Chevrolet Blazer Base 2020-2025 Chevrolet Blazer LT 2019-2025 Chevrolet Blazer Premier 2019-2025 Chevrolet Blazer RS 2020-2023 GMC Acadia AT4 2017-2023 GMC Acadia Denali 2017-2021 GMC Acadia SLE 2017-2023 GMC Acadia SLT

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall, pre-oiled 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance and filtration. Its inverted top and large surface area provide much longer life between maintenance intervals. This media is perfect for street use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Stainless-steel worm clamps are included for strength, and a premium silicone coupling allows for ample flexibility.Installation InstructionsThis Part Fits: Year Make Model Submodel 2023 Jeep Wagoneer Base 2023 Jeep Wagoneer Carbide 2022 Jeep Wagoneer Series I 2022 Jeep Wagoneer Series I Carbide 2022-2023 Jeep Wagoneer Series II 2022 Jeep Wagoneer Series II Carbide 2022-2023 Jeep Wagoneer Series III 2022 Jeep Wagoneer Series III Carbide

This 6” tall 360-degree radial flow air filter features a 3.5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. Its inverted bullet-style top makes for more filter surface area, resulting in longer service intervals. This media is perfect for street and/or track use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE) polymer, features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and a silicone bellows coupling allows for ample flexibility. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2019 Ford Fiesta ST

Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. High Quality Tube: This system uses a high quality plastic, CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum air temp sensor fitting provided for easy installation. Large 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4" x 4-3/4") oval flange and is 9" tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2018-2021 Dodge Durango SRT 2022-2024 Dodge Durango SRT 392 2014-2021 Jeep Grand Cherokee SRT 2012-2013 Jeep Grand Cherokee SRT8

Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. Carbon Fiber Accent are provided for car show quality and to further distinguish your vehicle from others. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum crankcase fitting and temp sensor fitting for easy installation. Huge 3-Layer Performance Air Filter: The Momentum GT intake is designed around an oil-free, large 8" round 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone double hump coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. NOTE; This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor VehiclesInstallation InstructionsThis Part Fits: Year Make Model Submodel 2017-2018 Ram 2500 Big Horn 2017-2018 Ram 2500 Laramie 2017-2018 Ram 2500 Laramie Longhorn 2017-2018 Ram 2500 Limited 2017-2018 Ram 2500 Power Wagon 2017-2018 Ram 2500 SLT 2017-2018 Ram 2500 Tradesman 2017-2018 Ram 3500 Big Horn 2017-2018 Ram 3500 Laramie 2017-2018 Ram 3500 Laramie Longhorn 2017-2018 Ram 3500 Limited 2017 Ram 3500 Lone Star 2017-2018 Ram 3500 SLT 2017-2018 Ram 3500 Tradesman

Unique One-Piece Housing w/ Sight Window: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (Housing-to-Filter Interface US PAT 9440175) Huge 3-Layer Performance Air Filter: The Momentum GT is designed around an oil-free, large 8" tall 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011-2024 Dodge Durango Citadel 2011-2013 Dodge Durango Crew 2018 Dodge Durango GT 2014-2015 Dodge Durango Limited 2018-2024 Dodge Durango Pursuit 2011-2024 Dodge Durango R/T 2022-2023 Dodge Durango R/T Hemi Orange 2022-2024 Dodge Durango R/T Plus 2023-2024 Dodge Durango R/T Premium 2012-2024 Dodge Durango Special Service 2018 Dodge Durango SXT 2018-2020 Jeep Grand Cherokee High Altitude 2011-2013 Jeep Grand Cherokee Laredo 2011-2021 Jeep Grand Cherokee Limited 2019-2021 Jeep Grand Cherokee Limited X 2011-2021 Jeep Grand Cherokee Overland 2012 Jeep Grand Cherokee Overland Summit 2014-2021 Jeep Grand Cherokee Summit 2017-2021 Jeep Grand Cherokee Trailhawk

Large Three Layer Performance Air Filter: Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented/patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet can be used to pull in additional air, or can be closed with an included plug. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Premium Components: Momentum GT intakes are designed with fewer parts for a fast and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Emissions Disclaimer: This product does not require a CARB EO# (Vehicle does not exist in U.S.)This Part Fits: Year Make Model Submodel 2013-2020 Toyota Land Cruiser Base

Unique One-Piece Housing: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold weather applications where you want to block the auxiliary air scoop. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (US PAT 9440175) For Filter-to-Housing Interface. Roto-mold Tube: This System uses a two piece CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit. Huge 3-Layer Performance Air Filter: The Momentum GT is designed around an oil-free, large 8" Tall round inverted top 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a urethane hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2024 Dodge Durango Citadel 2017-2024 Dodge Durango GT 2020-2024 Dodge Durango GT Plus 2023-2024 Dodge Durango GT Premium 2016 Dodge Durango Limited 2019-2024 Dodge Durango Pursuit 2016-2020 Dodge Durango Special Service 2016-2024 Dodge Durango SXT 2018-2021,2023-2024 Dodge Durango SXT Plus 2016 Jeep Grand Cherokee 75th Anniversary 2021 Jeep Grand Cherokee 80th Anniversary 2018-2020 Jeep Grand Cherokee Altitude 2018-2021 Jeep Grand Cherokee High Altitude 2016-2020 Jeep Grand Cherokee Laredo 2021 Jeep Grand Cherokee Laredo E 2021 Jeep Grand Cherokee Laredo X 2016-2021 Jeep Grand Cherokee Limited 2019-2021 Jeep Grand Cherokee Limited X 2016-2021 Jeep Grand Cherokee Overland 2016-2021 Jeep Grand Cherokee Summit 2017-2021 Jeep Grand Cherokee Trailhawk 2019-2020 Jeep Grand Cherokee Upland

Large Three Layer Performance Air Filter:Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 8” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.Unique One-Piece Housing:The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), draws styling cues from the Mustang's body. It incorporates the OE air inlet with no additional hardware and features an auxiliary air inlet that captures additional air from the inner fender. Its patented filter-to-housing interface design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system.Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Premium Components:Momentum GT intakes are designed with fewer parts for a fast and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. Premium T-bolt clamps, couplings, and all other hardware is included.Installation InstructionsThis Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2018-2023 Ford Mustang GT 2018-2021 Ford Mustang GT Premium 2021 Ford Mustang Mach 1

This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4" x 4-3/4") oval flange and is 9" tall with an inverted top. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to block off the auxiliary air inlet. This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains whi le maintaining a perfect fit.This Part Fits: Year Make Model Submodel 2017-2022 Chevrolet Colorado LT 2017-2022 Chevrolet Colorado WT 2017-2022 Chevrolet Colorado Z71 2017-2022 Chevrolet Colorado ZR2 2018-2020 GMC Canyon All Terrain 2021-2022 GMC Canyon AT4 2017-2020 GMC Canyon Base 2017-2022 GMC Canyon Denali 2021-2022 GMC Canyon Elevation 2021-2022 GMC Canyon Elevation Standard 2017-2020 GMC Canyon SLE 2017-2020 GMC Canyon SLT

This 6” tall 360-degree radial flow air filter features a 3.5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. Its inverted top makes for more filter surface area, resulting in longer service intervals. This media is best suited for street use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE) polymer, features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and a silicone bellows coupling allows for ample flexibility. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.Installation InstructionsThis Part Fits: Year Make Model Submodel 2014-2015 Ford Fiesta ST

Unique One-Piece High Quality Housing W/ Auxiliary Inlet: The smooth one-piece (Patent Pending) high quality sealed housing with auxiliary air inlet is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. Carbon Fiber Trim On Housing: This Momentum GT intake system offers carbon fiber trim on housing to give that motorsport appearance. This cover overlay is constructed of lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Large 3-Layer Performance Air Filter: The Momentum GT intake is designed around an oil-free, large 8-3/4" oval 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Custom High Temp. Silicone Coupling: A custom high temperature reinforced silicone elbow coupling is included for easy install to the factory breather line. Premium Hardware Premium stainless steel clamps are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 BMW 340i Base 2016-2018 BMW 340i xDrive Base 2017-2020 BMW 440i Base 2017-2020 BMW 440i Gran Coupe Base 2017-2020 BMW 440i xDrive Base 2017-2020 BMW 440i xDrive Gran Coupe Base 2016-2018 BMW 740i Base 2017-2018 BMW 740i xDrive Base 2017-2021 BMW M240i Base 2017-2021 BMW M240i xDrive Base

This 6” tall 360-degree radial flow air filter features a 3.5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. Its inverted top makes for more filter surface area, resulting in longer service intervals. This media is best suited for street use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE) polymer, features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and a silicone bellows coupling allows for ample flexibility. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2019 Ford Fiesta ST

This 7.5” tall 360-degree radial flow air filters feature a 6” x 4" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Their progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. Its inverted top makes for more filter surface area, resulting in longer service intervals. This media is best suited for street use. Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. Once the system is installed, the air filter can be easily removed from the housing for maintenance by uninstalling the intake tube. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing connects to the factory air inlet, using no additional hardware. Its auxiliary air inlet can be used to bring in additional air from the engine compartment, or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. High quality premium clamps and a silicone bellow coupling are used for durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2019 Cadillac XT5 Base 2017-2019 Cadillac XT5 Luxury 2017-2019 Cadillac XT5 Platinum 2017-2023 Cadillac XT5 Premium Luxury 2020-2023 Cadillac XT5 Sport 2019 Chevrolet Blazer Base 2020-2025 Chevrolet Blazer LT 2019-2025 Chevrolet Blazer Premier 2019-2025 Chevrolet Blazer RS 2020-2023 GMC Acadia AT4 2017-2023 GMC Acadia Denali 2017-2021 GMC Acadia SLE 2017-2023 GMC Acadia SLT

Unique One-Piece Housing: The smooth one-piece sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. Roto-mold Tube: This System uses a CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit. Huge 5-Layer Performance Air Filter: The Momentum GT intake is designed around a pre-oiled, large 9" Tall conical inverted top 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: A premium stainless steel T-bolt clamp and a silicone couplers are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2017-2020 Ford F-150 King Ranch 2017-2020 Ford F-150 Lariat 2017-2020 Ford F-150 Limited 2017-2020 Ford F-150 Platinum 2018-2020 Ford F-150 Police Responder 2017-2020 Ford F-150 Raptor 2017-2020 Ford F-150 SSV 2017-2020 Ford F-150 XL 2017-2020 Ford F-150 XLT

Large Three Layer Performance Air Filter:This 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals.Filter-to-Housing Interface:Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. Once the system is installed, the air filter can be easily removed from the housing for maintenance by only uninstalling the intake tube.Unique One-Piece Housing:The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air.Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Premium Components:Stainless-steel T-bolt clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2025 Cadillac Escalade Luxury 2021-2025 Cadillac Escalade Premium Luxury 2021-2025 Cadillac Escalade Premium Luxury Platinum 2021-2025 Cadillac Escalade Sport 2021-2025 Cadillac Escalade Sport Platinum 2023-2025 Cadillac Escalade V 2021-2025 Cadillac Escalade ESV Luxury 2021-2025 Cadillac Escalade ESV Premium Luxury 2021-2025 Cadillac Escalade ESV Premium Luxury Platinum 2021-2025 Cadillac Escalade ESV Sport 2021-2025 Cadillac Escalade ESV Sport Platinum 2023-2025 Cadillac Escalade ESV V 2019-2020 Chevrolet Silverado 1500 Custom 2020-2021,2023 Chevrolet Silverado 1500 Custom Trail Boss 2019-2024 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2020-2024 Chevrolet Silverado 1500 LT Trail Boss 2019-2024 Chevrolet Silverado 1500 LTZ 2020-2024 Chevrolet Silverado 1500 RST 2019-2020 Chevrolet Silverado 1500 SSV 2019-2020 Chevrolet Silverado 1500 WT 2022-2024 Chevrolet Silverado 1500 ZR2 2021-2025 Chevrolet Suburban High Country 2022-2025 Chevrolet Suburban Premier 2022-2025 Chevrolet Suburban RST 2022-2025 Chevrolet Suburban Z71 2021-2025 Chevrolet Tahoe High Country 2022-2025 Chevrolet Tahoe Premier 2022-2025 Chevrolet Tahoe RST 2022-2025 Chevrolet Tahoe Z71 2019-2025 GMC Sierra 1500 AT4 2022-2024 GMC Sierra 1500 AT4X 2019-2020 GMC Sierra 1500 Base 2019-2024 GMC Sierra 1500 Denali 2022-2024 GMC Sierra 1500 Denali Ultimate 2019-2020 GMC Sierra 1500 SLE 2019-2024 GMC Sierra 1500 SLT 2022-2025 GMC Yukon AT4 2021-2025 GMC Yukon Denali 2023-2024 GMC Yukon Denali Ultimate 2022-2025 GMC Yukon XL AT4 2021-2025 GMC Yukon XL Denali 2023-2024 GMC Yukon XL Denali Ultimate

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. This media is best suited for street and light off-road use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Stainless-steel worm clamps are included for strength, and a premium silicone coupling allows for ample flexibility.Installation InstructionsThis Part Fits: Year Make Model Submodel 2023 Jeep Wagoneer Base 2023 Jeep Wagoneer Carbide 2022 Jeep Wagoneer Series I 2022 Jeep Wagoneer Series I Carbide 2022-2023 Jeep Wagoneer Series II 2022 Jeep Wagoneer Series II Carbide 2022-2023 Jeep Wagoneer Series III 2022 Jeep Wagoneer Series III Carbide

This 360-degree radial flow air filter features our pre-oiled Pro-GUARD 7 with 5-layers of progressive cotton media with 2-layers of synthetic media providing 99.7% cumulative efficiency for maximum filtration (US PAT 06811588). Our Pro-GUARD 7 media provides your engine with maximum protection with highest cumulative filtration efficiency for severe duty environments. This media is perfect for street and/or off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates the factory air inlet scoop. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and a premium silicone coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2025 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2025 Ford Bronco Big Bend 2021-2024 Ford Bronco Black Diamond 2022-2024 Ford Bronco Everglades 2023-2025 Ford Bronco Heritage Edition 2021-2025 Ford Bronco Outer Banks

Large Ten Layer Performance Air Filter: Momentum™s unique filter-to-housing interface was built to feature the largest air filter possible. This 9 tall, pre-oiled 360-degree radial flow air filter features a 6-1/2" x 4-3/4 oval flange and our pre-oiled Pro 10R media with ten layers of progressively finer cotton gauze media for maximum performance and filtration. Its inverted top and large surface area provide much longer life between maintenance intervals, while reinforced metal provides maximum strength to prevent filter collapse. This media is best suited for off-road applications. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Dynamic Air Scoop: The included Dynamic Air Scoop (D.A.S.) is constructed of heat-resistant XLPE, features a 30% larger inlet area than the factory scoop, and attaches with no additional hardware. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Premium Components: Momentum HD intakes are designed with fewer parts for a fast and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary T-bolt clamps, couplings, and hardware are included.Installation InstructionsThis Part Fits: Year Make Model Submodel 1995-1996 Ford F-250 Eddie Bauer 1995-1996 Ford F-250 Special 1994-1996 Ford F-250 XL 1994-1996 Ford F-250 XLT 1997 Ford F-350 Base 1995 Ford F-350 Eddie Bauer 1995-1996 Ford F-350 Special 1994-1997 Ford F-350 XL 1994-1997 Ford F-350 XLT

Large Three Layer Performance Air Filter: Momentum™s unique filter-to-housing interface was built to feature the largest air filter possible. This 9 tall 360-degree radial flow air filter features a 6-1/2" x 4-3/4 oval flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals, while reinforced metal provides maximum strength to prevent filter collapse.Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system.Dynamic Air Scoop: The included Dynamic Air Scoop (D.A.S.) is constructed of heat-resistant XLPE, features a 30% larger inlet area than the factory scoop, and attaches with no additional hardware.Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Premium Components: Momentum HD intakes are designed with fewer parts for a fast and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary T-bolt clamps, couplings, and hardware are included.Installation InstructionsThis Part Fits: Year Make Model Submodel 1995-1996 Ford F-250 Eddie Bauer 1995-1996 Ford F-250 Special 1994-1996 Ford F-250 XL 1994-1996 Ford F-250 XLT 1997 Ford F-350 Base 1995 Ford F-350 Eddie Bauer 1995-1996 Ford F-350 Special 1994-1997 Ford F-350 XL 1994-1997 Ford F-350 XLT

Unique One-Piece Housing with Sight Window:A custom computer designed housing eliminates the use of multiple components. It’s roto-molded and made from heat soak resistant cross-linked polyethylene, ensuring the coolest air intake charge possible. A clear sight window allows for filter inspection without removal of the airbox. The housing is designed to retain the same stock mounting points as the OE intake system for a hassle-free installation.Large 5-Layer Performance Air Filter:This Momentum XP intake system was designed around the largest filter possible to allow maximum performance and filtration. Its unique filter-to-housing interface (US PAT 9440175) not only makes for a simple installation, but also allows for a large inverted 3.8”x 9" air filter. The filter’s Pro 5R media features five progressively finer porosity cotton gauze layers that provide maximum airflow and performance. Mandrel-Bent Tubing:A one piece 3.5" mandrel-bent wrinkle-black powder-coated aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque. Premium Hardware:Premium stainless-steel t-bolt clamps provide the best corrosion resistance possible. Momentum XP intakes are designed with fewer parts for a quick and simple installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2020 Cadillac Escalade Base 2015-2020 Cadillac Escalade Luxury 2015-2020 Cadillac Escalade Platinum 2015-2016 Cadillac Escalade Premium 2017-2020 Cadillac Escalade Premium Luxury 2015-2020 Cadillac Escalade ESV Base 2015-2020 Cadillac Escalade ESV Luxury 2015-2020 Cadillac Escalade ESV Platinum 2015-2016 Cadillac Escalade ESV Premium 2017-2020 Cadillac Escalade ESV Premium Luxury 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2019 Chevrolet Silverado 1500 LD Custom 2019 Chevrolet Silverado 1500 LD LT 2019 Chevrolet Silverado 1500 LD WT 2015-2020 Chevrolet Suburban LS 2015-2020 Chevrolet Suburban LT 2015-2016 Chevrolet Suburban LTZ 2017-2020 Chevrolet Suburban Premier 2015-2020 Chevrolet Tahoe LS 2015-2020 Chevrolet Tahoe LT 2015-2016 Chevrolet Tahoe LTZ 2015-2020 Chevrolet Tahoe PPV 2017-2020 Chevrolet Tahoe Premier 2015-2020 Chevrolet Tahoe SSV 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT 2019 GMC Sierra 1500 Limited Base 2019 GMC Sierra 1500 Limited SLE 2015-2020 GMC Yukon Denali 2015-2020 GMC Yukon SLE 2015-2020 GMC Yukon SLT 2015-2020 GMC Yukon XL Denali 2015-2020 GMC Yukon XL SLE 2015-2020 GMC Yukon XL SLT

A simple 30 minute install will give you a huge increase in power. The aFe POWER SCORCHER HD Module includes a high quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red). This performance module increase turbo boost and fuel pressure. It improves vehicle performance and throttle response.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2018 Ford Focus RS