$250 to $500

Hotchkis Sport Suspension 2272 2002-2007 Chevrolet Trailblazer Rear Sport Sway Bar. Improve cornering by reducing body roll of your Trailblazer with a Hotchkis Performance Rear Sway Bar. This bar is designed to reduce the under steer associated with the large front bar GM put on the Trailblazer. This kit consists of a 1-1/16 in. Rear bar and polyurethane front and rear bushings. Kit now fits 2004+ models Additional Attributes: GTIN: 00810361034497 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 58 x 25 x 6 inches PDF: Hotchkis_MSDS_Sheet

Hotchkis Sport Suspension 22826F 2001-2006 BMW E46 M3 Front Sport Sway Bar. Enhance the cornering performance of your M3 with Hotchkis Sport Suspension Front sway bar. Our M3 sport front sway bar increases front roll stiffness giving the car quicker turn-in response and balanced handling. As delivered the M3 handling characteristics are excessive under steer and limited roll control. Hotchkis sway bars give the driver the ability to rotate the car on corner entry and steer with the throttle when necessary. The dreaded under steer is eliminated and the handling becomes comfortably neutral. Hotchkis sway bars feature a durable powder coat finish greasable bushings performance rear end links and 6 different tuning rates via multiple end link positioning (when installed as a set). Specifications: 1-3/16 in. (30mm) Tubular Front Bar 3 Way Adjustable. Rate Increase vs. Stock +11% +28% +49%. Additional Attributes: GTIN: 00810361034985 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 51 x 17 x 5 inches PDF: Hotchkis_MSDS_Sheet

Hotchkis Sport Suspension 13800 Sport Rear Camber Links for 2002-2009 Mini Cooper and Copper S have an adjustment range from zero to negative four degrees for increased rear grip are fully built and pre-set to the stock length with greasable bushings. Each Link is simply adjusted by loosening the lock nuts and then rotating the hex center for more or less camber. The Sport Rear Camber Links are designed and tested to suit any street or track environment. With the Links pre-set to the stock length you can then use that camber setting as your new baseline. The Links themselves are made up of two tubular steel outer arms with a billet aluminum hex center. The polyurethane bushings can be greased by utilizing the zerk fittings at each end. Durable yet highly functional the Sport Camber Links give you the freedom to set your Mini s rear camber at any setting. Application: 02-09 Cooper Cooper S Additional Attributes: GTIN: 00810361030888 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 27 x 6 x 4 inches

Hotchkis Sport Suspension 22810R 2002-2006 Mini Cooper R53 Competition Rear Sway Bar. The Competition Rear is a massive 25.5mm tubular 4130 chrome moly sway bar weighing in at only 5.5 pounds! Recommended for competition use only the Competition Rear has three adjustment positions with the softest setting being the more neutral balance. From there the middle setting will really aid the Minis medium to long mid-corner speed where there will not be any throttle feathering needed to turn the car. The stiffest setting is most beneficial through very slow tight corners where without the bar you'd find yourself on and off throttle several times. With the Competition Rear this type of corner should only be a one throttle application corner with a rear-steer feel. Although handling characteristics may vary depending on your set-up each position of the Competition Rear is very distinct and useful. Now you have an advantage at the track and auto-cross course! The set comes complete with polyurethane bushings bushing brackets and 90-degree zerk fittings for easy lubrication Rate increase over stock. Rear: +226% +294 +383% Additional Attributes: GTIN: 00810361034756 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 53 x 18 x 4 inches PDF: Hotchkis_MSDS_Sheet

Hotchkis Sport Suspension 25407 2002-2007 Subaru WRX Competition End Link Set. Don't risk breaking your sway bar end links on your WRX. This common problem is easily solved with the Hotchkis End links. The front features high articulation ball joint end links (not currently pictured) while the back utilizes a cnc machined link with quiet greasable polyurethane bushings. Note: Will Not Fit Some Models with Dog-Bone Style Front Links. Most commonly used on wagons. Additional Attributes: GTIN: 00810361036323 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 10 x 6 x 6 inches

Don't risk breaking your sway bar end links on your WRX. This common problem is easily solved with the Hotchkis Tuning End links. Additional Attributes: GTIN: 00810361036286 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 10 x 6 x 6 inches

Hotchkis Sport Suspension 22419 2003-2005 Dodge Neon SRT4 Front Sport Sway Bars. Hotchkis Sport Suspension front sway bar will improve your handling and reduce body roll. Turn in with confidence and late brake in the corners with our track tested lightweight hollow sway bars. Front Sway bar sets include front greasable bushings brackets front end links. Front 1-1/8 in. (29 mm) Hollow +44%. Additional Attributes: GTIN: 00810361033773 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 53 x 15 x 4 inches PDF: Hotchkis_MSDS_Sheet

Hotchkis Sport Suspension 22419R 2003-2005 Dodge Neon SRT4 Rear Sport Sway Bars. Hotchkis Sport Suspension sway bars improve your handling and reduce body roll. Turn in with confidence and late brake in the corners with our track tested lightweight hollow sway bars. Rear sway bars include a fabricated rod end link setup. Rear 15/16 in. (24 mm) Hollow 2 Position Rear +225% +271% Additional Attributes: GTIN: 00810361033797 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 53 x 15 x 4 inches PDF: Hotchkis_MSDS_Sheet

Hotchkis Sport Suspension 22413 2003-2007 Nissan 350Z / G35 Sport Sway Bars. Hotchkis Sport Suspension Sway bars for your Nissan 350 Z or Infinity G35 improve your handling and reduce body roll. Turn in with confidence and late brake in the corners with our track tested lightweight hollow sway bars. Sway bar sets include front and rear bars greasable bushings and brackets. Specifications: Front 1-3/8 in. (35MM) Tubular(Bar Weight 13.5lbs) 4 Position Adjustable. Rear 15/16 in. (24mm) Tubular (bar weight 5.5lbs) 3 Position Adjustable. Bar rates compared to 350Z and 03- 05 G35 Front: Hole 1 = 1525 lbs/in (22% Stiffer than stock) Hole 2 = 1845 lbs/in (48% Stiffer than stock) Hole 3 = 2270 lbs/in (82% Stiffer than stock) Hole 4 = 2855 lbs/in (129% Stiffer than stock) Rear: Hole 1 = 520 lbs/in (80% Stiffer than stock) Hole 2 = 655 lbs/in (125% Stiffer than stock) Hole 3 = 840 lbs/in (185% Stiffer than stock) Additional Attributes: GTIN: 00810361033667 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 53 x 18 x 6 inches PDF: Hotchkis_MSDS_Sheet

Hotchkis Sport Suspension 22437 2004-2007 Mazda RX-8 Sport Sway Bar Set. Designed and manufactured by Hotchkis Sport Suspension specifically for the 2004-07 Mazda RX-8. Our street autocross and track ready Sway Bar package features our extensively tested 33mm 3 position adjustable front bar and our 21mm 3 position adjustable rear bar for drivers looking for a distinct street track and autocross handling advantage. Polyurethane bushings and heavy duty bushing brackets are also included along with zerk fittings for easy lubrication. The Mazda RX8 in stock form is limited by excessive body roll and under steer. For ultimate speed and due to the limited Rotary engine torque cornering momentum must be maintained. Bolt on a set of Hotchkis Sport Sway Bars and gain true handling performance and increased cornering momentum. Benefits: Dramatically improves cornering potential due to increased front/rear roll stiffness Offers definite track and autocross advantage over stock sway bar package Adjustable front/rear sway bars offer 9 roll stiffness adjustment possibilities for fine tuned balanced handling Speed robbing under steer is eliminated allowing power to be applied earlier during corner exit Durable and reliable in road or competition environments due to our extensive street and track testin gFeatures: Front Sway Bar :Lightweight durable and adjustable 1-5/16 in. (33mm) hollow 110% stiffer than the stock sway bar with a rate of 970 lbs/in. 150% stiffer than the stock sway bar with a rate of 1150 lbs/in. 195% stiffer than the stock sway bar with a rate of 1370 lbs/in. Rear Sway Bar: 390% stiffer than the stock sway bar with a rate of 195 lbs/in. 470% stiffer than the stock sway bar with a rate of 250lbs/in. 580% stiffer than the stock sway bar with a rate of 340 lbs/in. Easy to lubricate polyurethane bushings and heavy duty brackets with zerk fittings included. Additional Attributes: GTIN: 00810361034015 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 53 x 18 x 6 inches PDF: Hotchkis_MSDS_Sheet

Upgrade your stock end links with our set of 4 high articulation ball joint end links.(note only two pictured) These links are more durable than the stock links which are prone to breakage with stiff aftermarket bars. Fits: RSX04-07 WRX STI with stock rear links. Additional Attributes: GTIN: 00810361036255 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 10 x 6 x 6 inches

Hotchkis Sport Suspension 22832F Front Sway Bar for 2004-2008 Audi RS4 reduces body roll and offers improved handling and superior driver control . The kit includes a 1 3/8 in. lightweight tubular front bar greasable bushings and heavy duty mounts. Bolt on a Hotchkis Sport Suspension Sway Bar today for improved handling on your Audi RS4. Additional Attributes: GTIN: 00810361035128 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 6 x 48 inches PDF: Hotchkis_MSDS_Sheet

Hotchkis Sport Suspension 22832R 2007-2008 Audi RS4 Sport Rear Sway Bar. Designed and manufactured by Hotchkis Sport Suspension specifically for the new Audi B7 RS4 and B7/B6 S4. The autocross and track event ready Rear Sway Bar is a massive 29mm tubular 2 position adjustable rear bar for owners looking for a distinct track and autocross handling advantage. Polyurethane bushings and bushing brackets are also included along with 90-degree zerk fittings for easy lubrication. The RS4 tremendous fun in stock form just got even more exciting with the addition of Hotchkis Sport Sway Bars. The 22832R is designed for track use and must be used with a Hotchkis front sway bar. A front and rear sway bar package is also available kit # 22832. Fits All B6/B7 Platform Cars Features: Lightweight durable 29MM (1-1/8 in.) tubular steel rear sway bar. adjustable from +235% to +305% stiffness increase over stock RS4. Greasable polyurethane bushings and brackets w 90 degree zerk fittings. Gloss black powder coat finish. Benefits: Dramatically improved cornering potential due to increased rear roll stiffness. Offers definite track and autocross advantage over stock sway bar. Adjustable rear bar allows suspension to be finely tuned. Car has increased slip angle allowing power to be applied earlier during corner exit. Durable and reliable due to extensive track testing Additional Attributes: GTIN: 00810361035135 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 53 x 18 x 6 inches PDF: Hotchkis_MSDS_Sheet

Hotchkis Sport Suspension 22829R Sport Rear Sway Bar. Designed specifically for the 2004-08 Audi B6/B7 S4. The Hotchkis Sport Rear Sway Bar incorporates a 24mm tubular 2 position adjustable rear bar polyurethane bushings and bushing brackets are also included along with 90-degree zerk fittings for easy lubrication. Keep in mind that the stock S4 rear bar is a solid 20mm bar on two solid bushing towers. The biggest improvement will be felt through the steering as maneuvering takes much less steering input with greater response. While rounding tight or long corners the S4 feels as though it has more tire pressure on the outside tires and really stands on the outside rear exiting a corner. The new S4 which is a lot of fun in stock form just got more exciting with the addition of Hotchkis Sport Sway Bars! Rate increase over stock Rear: +145% 215% Fits B6 and B7 platforms Additional Attributes: GTIN: 00810361035067 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 53 x 18 x 6 inches PDF: Hotchkis_MSDS_Sheet

Hotchkis Sport Suspension 2284 2005-2013 Corvette C6/ZO6 Sport Sway Bar Set. Corvette C6/ZO6 Sport Sway Bar Set with a hollow tube bar that measures 1.25-inches in front and 1.125-inches in the rear and are 20% stiffer than stock in front and are adjustable from +30% to -15% stiffer in the rear. The result is dramatically improved cornering potential chassis balance and steering response. Besides offering exceptional handling improvements for street driving Hotchkis sway bars work extremely well in autocross road course and open road racing applications. The lightweight hollow sway bars are formed on a CNC machine powder coated gloss black for durability and come with special high durometer dry lube impregnated rubber bushings. Stock end links are retained to maintain a quiet ride on the street. Thanks to added adjustability the new Hotchkis C6 sway bar package reduces body roll increases vehicle control and adds a new level of driver feedback and control to any late-model Corvette even razor-sharp Z06 and Z51 models. Specifications: Lightweight durable 1-1/4 in. tubular steel front sway bar 20% Stiffer than Z51 and ZO6. Lightweight durable 1-1/8 in. adjustable tubular steel rear sway bar stiffness increase on Z51 +15% +45% +80%. Stiffness increase on ZO6 -15% Same +30%. Additional Attributes: GTIN: 00810361035395 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 58 x 18 x 6 inches PDF: Hotchkis_MSDS_Sheet

Hotchkis Sport Suspension 19104 2006-2009 Dodge Charger Sport Coil Springs. When we decided to manufacture coil spring for the SRT8 we took our time and researched other springs on the market. With those springs in mind we found a great combination of performance and comfortable ride characteristics. Our springs feature a linear rate design and come complete with urethane bump stops. Note: Not for vehicles with load leveling suspension. Drop: Front: 1-3/8 in. (15-11/16 in. hub center to fender) Rear: 1-11/16 in. (15-15/16 in. hub center to fender). Fits 2wd Hemi Only Additional Attributes: GTIN: 00810361031847 Extened Information: Emissions : Emission verification to be determined in ACES, vehicle application data. Life Cycle Status: Available To Order Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 20 x 16 x 15 inches