$250 to $500

K&N 88-95 Chevy C/K Pick Up V8-7.4L Performance Intake Kit K&N 88-95 Chevy C/K Pick Up V8-7.4L Performance Intake Kit
K&N 88-95 Chevy C/K Pick Up V8-7.4L Performance Intake Kit $331.18
This innovative K&N intake kit delivers top-notch performance for Chevy C/K pickups, including the robust 7.4L V8 engine. Engineered to improve airflow, horsepower, and torque, this performance intake for Chevy trucks is designed specifically for models from the late 1980s to the mid-1990s. Enjoy enhanced engine efficiency and an exhilarating driving experience with a kit that combines durability and ease of installation. For more advanced air intake solutions, visit our Air Intake Systems collection.Key Features High-density polyethylene (HDPE) rotationally molded tube enhances airflow for optimal engine performance. Washable, reusable high-flow air filter with oiled cotton media lasts up to 100,000 miles. Custom heat shield protects intake air from engine bay heat. Quick installation, typically achievable in under 60 minutes. Specifically engineered for Chevy C/K performance intake applications. Increases horsepower and torque for a noticeable boost in performance. Installation & ComplianceInstallation is straightforward and supported by detailed instructions (see PDF guides). Please note that some intakes may not meet CARB requirements and cannot be used on vehicles under emissions regulations in certain states. Always check local regulations to ensure compliance before installation.
K&N 88-95 Chevy/GMC Aircharger Performance Intake K&N 88-95 Chevy/GMC Aircharger Performance Intake
K&N 88-95 Chevy/GMC Aircharger Performance Intake $331.18
The K&N AirCharger 63-1007-1 is designed to replace your vehicle's restrictive factory air filter and intake housing, unlocking the full potential of your engine. With a design optimized for smoother airflow, this kit increases horsepower and acceleration throughout the RPM range. Whether you’re in the market for a K&N 88-95 Chevy air intake or a Chevy GMC performance intake, this product offers proven performance gains with a bold chrome lid that brings an aggressive, performance-oriented look under the hood.• Improved Airflow and Horsepower: The streamlined design cuts intake restrictions, allowing more air and power to reach the engine.• Easy Installation: Engineered for simplicity, it installs quickly with common tools.• Durable and Striking: The oversized high-flow filter and chrome-topped design not only boost performance but also enhance visual appeal.• Legal Disclaimer: This product is not approved for use in California or in states that follow California emissions regulations.Installation InsightsDetailed installation instructions are available through downloadable PDF links, perfect for DIY mechanics and automotive enthusiasts alike. These guides simplify the process and ensure a seamless installation—no special tools required!Fits These ModelsThis intake kit is compatible with a wide range of Chevrolet and GMC models. For a full list of fitment details, please visit our Air Intake Systems collection or view the extended fitment page included with the installation documentation.
K&N 88-95 Ford F150/Bronco V8-5.8L Performance Intake Kit K&N 88-95 Ford F150/Bronco V8-5.8L Performance Intake Kit
K&N 88-95 Ford F150/Bronco V8-5.8L Performance Intake Kit $331.18
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 1988-1993 Ford Bronco Custom 1988-1995 Ford Bronco Eddie Bauer 1990-1995 Ford Bronco XL 1988-1992,1994-1995 Ford Bronco XLT 1993 Ford Bronco XLT Lariat 1992 Ford Bronco XLT Nite 1995 Ford Bronco XLT Sport 1988-1992 Ford F-150 Custom 1995 Ford F-150 Eddie Bauer 1995 Ford F-150 Special 1988-1995 Ford F-150 XL 1993-1995 Ford F-150 XLT 1988-1992 Ford F-150 XLT Lariat 1989 Ford F-250 Custom 1989 Ford F-250 XL 1989 Ford F-250 XLT Lariat
K&N 88-95 Ford PickUp/Bronco Performance Intake Kit K&N 88-95 Ford PickUp/Bronco Performance Intake Kit
K&N 88-95 Ford PickUp/Bronco Performance Intake Kit $331.18
Experience a surge in performance with the K&N 88-95 Ford PickUp/Bronco Performance Intake Kit. Designed specifically for 1988‑1995 Ford Pickups and Broncos, this kit improves your vehicle’s breathing by replacing restrictive factory components with a design that boosts both horsepower and torque, delivering a noticeable improvement in throttle response.Key Benefits• Guaranteed increase in horsepower and torque by reducing factory intake restrictions• Optimized airflow through dual intake tubes for enhanced performance across the entire RPM range• Washable, reusable high-flow air filter with oil-treated media for consistent performance• Easy installation in approximately 60 minutes using common tools• Includes a vent hose and all necessary clamps, along with a No-Hassle Lifetime Limited Warranty ensuring street legality in all 50 US statesEasy Installation & CompatibilityThe kit is designed for a straightforward installation that fits directly into your vehicle’s original airbox area. Every component is precision-engineered to work seamlessly, ensuring your engine takes in more air for maximum efficiency. Ideal for 1988‑1995 Ford Bronco variants (including Custom, Eddie Bauer, XL, XLT, and more) and Ford PickUp models, this performance upgrade delivers reliability and durability mile after mile.Discover more high-quality air intake solutions in our Air Intake Systems collection and experience the K&N Engineering difference.
K&N 88-95 Toyota PickUp/4Runner L4 Performance Air Intake Kit K&N 88-95 Toyota PickUp/4Runner L4 Performance Air Intake Kit
K&N 88-95 Toyota PickUp/4Runner L4 Performance Air Intake Kit $342.67
The K&N Toyota Pickup air intake and K&N 4Runner L4 performance intake kit enhances your vehicle’s performance by replacing the restrictive factory air filter and intake housing. Designed for 1988-1995 Toyota Pickup and 4Runner models, it improves airflow to increase engine power, throttle response, and acceleration across the RPM range.Key Features• Boosts horsepower and torque by reducing intake restrictions• Equipped with a high-flow, chrome-topped air filter offering service intervals up to 100,000 miles• Simple installation in 60 minutes or less using existing factory mounting points and standard tools• Covered by the K&N No-Hassle Lifetime Limited Warranty and compliant with street legality in all 50 US statesInstallation & CompatibilityEngineered for ease of use, this performance air intake system attaches directly to your vehicle’s factory mass air sensor and throttle body. Its precise design ensures a perfect fit while maintaining emissions compliance. Compatible models include:• 1988-1989 Toyota 4Runner DLX• 1988-1995 Toyota 4Runner SR5• 1988-1995 Toyota Pickup Base & DLX• 1988-1990, 1992-1993 Toyota Pickup SR5• 1988 Toyota Pickup SR5 TurboFor additional performance products, visit our Air Intake Systems collection. Discover enhanced power and reliability with a component built for both enthusiasts and professionals.
K&N 88-95 Toyota PickUp/4Runner V6 Performance Air Intake Kit K&N 88-95 Toyota PickUp/4Runner V6 Performance Air Intake Kit
K&N 88-95 Toyota PickUp/4Runner V6 Performance Air Intake Kit $331.18
This K&N performance air intake system is designed to unlock your Toyota 4Runner or PickUp V6 engine’s full potential by enhancing airflow and delivering measurable horsepower gains. By removing the restrictive factory air intake, this kit smooths and straightens the incoming air, resulting in improved throttle response and superior performance throughout the RPM range. Enjoy an enhanced power experience backed by a high-flow, chrome-topped air filter that offers up to 100,000 miles of service life, depending on driving conditions.Key Benefits• Increased horsepower and acceleration• Improved throttle response for smoother engine performance• Easy installation in 60 minutes or less with factory mounting points• Long-lasting high-flow air filter that reduces maintenance intervals• Street legal in all 50 states with a No-Hassle Lifetime Limited WarrantySpecifications• Installation Time: Approximately 60 minutes• Compatibility: Made for Toyota 4Runner and PickUp models with V6 engines• Filter Life: Up to 100,000 miles based on driving conditions• Warranty: K&N No-Hassle Lifetime Limited Warranty, ensuring lasting performanceInstallation & CompatibilityThis performance air intake kit is a straightforward upgrade that fits seamlessly into your vehicle’s existing setup. It accommodates the factory mass air sensor and engine vent line while requiring only basic tools such as a screwdriver, socket set, and several wrenches. Engineered for Toyota 4Runner (DLX and SR5) and PickUp models, it’s the ideal solution to boost your engine’s air intake efficiency and overall drivability.Explore more innovative air management solutions in our Air Intake Systems collection and experience the difference with Everything Truck Parts.
K&N 90-93 300ZX Turbo/Non-Turbo Performance Intake Kit K&N 90-93 300ZX Turbo/Non-Turbo Performance Intake Kit
K&N 90-93 300ZX Turbo/Non-Turbo Performance Intake Kit $299.99
Upgrade your Nissan 300ZX performance with the K&N 57-6001 FIPK air intake system. This performance intake kit for the 300ZX—also known as the 300ZX turbo performance intake kit or the K&N intake kit for 300ZX—is designed for the 1990-1993 models including 2+2, Base, and Turbo variants. Enjoy improved throttle response and increased horsepower with this 90-93 300ZX intake upgrade that replaces your factory air box for better airflow.Key Benefits & Features Guaranteed horsepower increase thanks to improved airflow Enhanced throttle response and a more aggressive engine sound Easy installation in approximately 60–90 minutes using common tools Washable, reusable high-flow air filter that lasts up to 100,000 miles Street legal in all 50 US states Specifications Part Number: 57-6001 FIPK Filter: Large, round, chrome-topped high-flow air filter Compatibility: 1990–1993 Nissan 300ZX (2+2, Base, Turbo) Installation Time: Approximately 60–90 minutes Warranty: K&N Million Mile Limited Warranty Installation InstructionsFor detailed guidance, please review the following resources: Installation Instructions PDF 1 Installation Instructions PDF 2 Experience quick installation and long-term performance. Upgrade your 300ZX today and explore our Air Intake Systems collection for more quality enhancements!
K&N 91-95 Jeep Cherokee Performance Intake Kit K&N 91-95 Jeep Cherokee Performance Intake Kit
K&N 91-95 Jeep Cherokee Performance Intake Kit $331.18
Experience significantly improved engine performance with the K&N 91-95 Jeep Cherokee performance intake kit. Designed specifically for Jeep Cherokee enthusiasts, this high-performance system enhances airflow, horsepower, and torque with its HDPE rotationally-molded tube and high-flow air filter. Enjoy better acceleration and efficiency, knowing that every component is engineered for peak performance and longevity.Key Features• Guaranteed increase in horsepower and torque• Optimized airflow with an HDPE rotationally-molded intake tube• Washable, reusable high-flow air filter featuring oiled cotton media (service interval up to 100,000 miles)• Custom heat shield to protect intake air from engine bay heat• Quick installation in under 60 minutes using standard hand tools• CARB compliance details available according to specific vehicle requirementsSpecifications• Material: High-density polyethylene (HDPE) for durability• Filter: High-flow, oiled cotton media design• Service Interval: Up to 100,000 miles under normal highway conditions• Installation: Typically less than 60 minutes• Warranty: No-Hassle Lifetime Limited Warranty (see product specs for details)Fits• Applicable for 1991-1995 Jeep Cherokee models, including:Base, Briarwood, Country, Laredo, Limited, SE, and Sport trimsFor more performance-enhancing parts, explore our Air Intake Systems collection or check out our curated selection in the Jeep Cherokee 1984-2001 Parts category.
K&N 91-95 Jeep Wrangler L6-4.0L Performance Intake Kit K&N 91-95 Jeep Wrangler L6-4.0L Performance Intake Kit
K&N 91-95 Jeep Wrangler L6-4.0L Performance Intake Kit $331.18
Experience a noticeable boost in engine performance with this high-performance intake kit designed for Jeep Wrangler and similar 4.0L engines. Engineered with a high-density polyethylene (HDPE) rotationally molded tube and a washable, reusable High-Flow Air Filter featuring premium oiled cotton filter media, this kit ensures increased horsepower, improved throttle response, and enhanced torque for your vehicle. Among its many benefits, this kit stands out as an excellent option for those seeking a K&N Jeep Wrangler performance intake kit or upgraded performance enhancements for Jeep Wrangler 4.0L applications.Key Benefits & Features• Guaranteed increase in horsepower and torque• Improved throttle response for optimal driving performance• Long-lasting filter service up to 100,000 miles, reducing maintenance costs• Easy installation, typically completed in less than 90 minutesTechnical DetailsThe design features an HDPE tube optimized for airflow while the oversized, conical high-flow filter ensures extended service intervals. A custom heat shield is included to protect the intake air from engine bay temperatures. These components work in harmony to deliver the performance reliability you expect from a Jeep Wrangler 4.0L intake kit.Before installation, please note that some intakes may not be legal for sale or use on pollution-controlled vehicles in certain states, including California. Refer to product specifications for CARB compliance details. This part fits specific Jeep Wrangler models; for additional performance parts, explore our Air Intake Systems collection.
K&N 92-95 Chevy/GMC PickUp Performance Intake Kit K&N 92-95 Chevy/GMC PickUp Performance Intake Kit
K&N 92-95 Chevy/GMC PickUp Performance Intake Kit $283.48
The K&N 57-3014 FIPK air intake system replaces the restrictive factory air filter and air box. K&N intakes are designed to dramatically reduce intake restriction and improve air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-3014 air intake comes with a large, round chrome topped K&N high-flow air filter assembly that installs onto the throttle body within the previous air cleaner space. Air is directed through the air filter into the engine's throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 60 minutes or less using existing factory mounting points accommodating the factory crank case vent line. The tools needed are a screwdriver, a ratchet set and an 8 millimeter wrench. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's No-Hassle Lifetime Limited Warranty.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 1994-1995 Chevrolet C2500 Base 1992-1995 Chevrolet C2500 Cheyenne 1991-1992 Chevrolet C2500 Scottsdale 1992-1995 Chevrolet C2500 Silverado 1994-1995 Chevrolet C2500 WT 1992-1995 Chevrolet C2500 Suburban Base 1995 Chevrolet C2500 Suburban LS 1995 Chevrolet C2500 Suburban LT 1992-1994 Chevrolet C2500 Suburban Silverado 1994-1995 Chevrolet C3500 Base 1992-1995 Chevrolet C3500 Cheyenne 1992 Chevrolet C3500 Scottsdale 1992-1995 Chevrolet C3500 Silverado 1994-1995 Chevrolet K2500 Base 1992-1995 Chevrolet K2500 Cheyenne 1991-1992 Chevrolet K2500 Scottsdale 1992-1995 Chevrolet K2500 Silverado 1994-1995 Chevrolet K2500 WT 1992-1995 Chevrolet K2500 Suburban Base 1995 Chevrolet K2500 Suburban LS 1995 Chevrolet K2500 Suburban LT 1992-1994 Chevrolet K2500 Suburban Silverado 1994-1995 Chevrolet K3500 Base 1992-1995 Chevrolet K3500 Cheyenne 1992 Chevrolet K3500 Scottsdale 1992-1995 Chevrolet K3500 Silverado 1992-1993 GMC C2500 Sierra 1994-1995 GMC C2500 Sierra SL 1992-1995 GMC C2500 Sierra SLE 1994-1995 GMC C2500 Sierra SLT 1992-1993 GMC C2500 Sierra SLX 1992-1995 GMC C2500 Suburban Base 1992-1995 GMC C2500 Suburban SLE 1995 GMC C2500 Suburban SLT 1992-1993 GMC C3500 Sierra 1994-1995 GMC C3500 Sierra SL 1992-1995 GMC C3500 Sierra SLE 1994-1995 GMC C3500 Sierra SLT 1992-1993 GMC C3500 Sierra SLX 1992-1993 GMC K2500 Sierra 1994-1995 GMC K2500 Sierra SL 1992-1995 GMC K2500 Sierra SLE 1994-1995 GMC K2500 Sierra SLT 1992-1993 GMC K2500 Sierra SLX 1992-1995 GMC K2500 Suburban Base 1992-1995 GMC K2500 Suburban SLE 1995 GMC K2500 Suburban SLT 1992-1993 GMC K3500 Sierra 1994-1995 GMC K3500 Sierra SL 1992-1995 GMC K3500 Sierra SLE 1994-1995 GMC K3500 Sierra SLT 1992-1993 GMC K3500 Sierra SLX
K&N 92-96 Dodge Dakota V6/V8 Performance Intake Kit K&N 92-96 Dodge Dakota V6/V8 Performance Intake Kit
K&N 92-96 Dodge Dakota V6/V8 Performance Intake Kit $283.48
Experience a performance upgrade with the K&N Dodge Dakota intake kit, engineered specifically to enhance airflow and engine efficiency. This Dodge Dakota V6/V8 performance intake and Dodge Dakota V6/V8 cold air intake replaces the restrictive factory system, allowing your engine to breathe deeply for increased horsepower and torque at any RPM.Key Features & Benefits• Designed to significantly reduce intake restriction for improved throttle response• Includes a large, round high-flow, chrome-topped air filter for maximum airflow• Features K&N engineering innovations such as a mandrel-bent aluminum intake tube• Offers a guaranteed increase in horsepower and torque, tested for real-world performance• Durable and street legal in all 50 US states, backed by a No-Hassle Lifetime Limited WarrantyProduct Details• Easy installation: Typically 60 minutes or less with common tools• Filter longevity: Service interval up to 100,000 miles depending on driving conditions• High-flow design directs air straight into the throttle body• Engineered for precision on both V6 and V8 engines• Uses oiled cotton filter media to capture contaminants while ensuring optimal airflowVehicle Fitment• Compatible with 1992-1996 Dodge Dakota models (Base, LE, S, SLT, Sport, WS)Upgrade your ride and boost performance with confidence. Don’t wait—buy now and experience the difference that K&N engineering delivers. For more innovative air intake systems, explore our collection here.
K&N 92-99 BMW 3 Series Performance Intake Kit K&N 92-99 BMW 3 Series Performance Intake Kit
K&N 92-99 BMW 3 Series Performance Intake Kit $331.18
Experience a boost in horsepower and torque with our premium K&N BMW 3 Series Intake Kit. Designed for performance enthusiasts, this system uses high-density polyethylene (HDPE) construction and advanced airflow technology to improve your BMW’s engine efficiency while remaining simple to install.Key Features Durable HDPE rotationally molded tube for increased airflow Washable, reusable high-flow air filter with oiled cotton media Custom-designed heat shield that keeps intake air away from high engine bay temperatures Quick installation process – generally completed in under 60 minutes with long-lasting performance (up to 100,000 miles between filter services) Installation & FitmentInstallation is straightforward with clear, step-by-step instructions provided in the linked installation guide. No special tools are needed beyond the basics, making this kit a great fit for both experienced enthusiasts and beginners alike. It’s engineered for models such as the BMW 323is, 325i, 325is, 328i, 328is, and various M3 configurations—ideal for those seeking a reliable BMW 3 Series performance intake upgrade.NoteSome intake systems may not be legal for use on pollution-controlled vehicles in California. Please review the CARB status information for your specific model to ensure compliance.For more performance parts, explore our Air Intake Systems collection.
K&N 93-97 Chevy Camaro Performance Intake Kit K&N 93-97 Chevy Camaro Performance Intake Kit
K&N 93-97 Chevy Camaro Performance Intake Kit $331.18
Experience a genuine performance upgrade built specifically for 1993–1997 Chevy Camaro models. This advanced air intake system uses a high-density polyethylene (HDPE) rotationally molded tube designed to boost airflow, resulting in guaranteed horsepower and torque gains. It features a washable, reusable high-flow air filter with oiled cotton media and a custom heat shield for optimal engine bay protection, engineered for efficiency and durability under normal highway conditions.Key Benefits• Enhanced airflow with an HDPE rotationally molded tube• Washable, reusable high-flow air filter designed for up to 100,000 miles• Custom heat shield to block engine bay heat• Quick installation in under 60 minutes• Guaranteed performance gains – check real-world performance data for detailsVehicle CompatibilityIdeal for a range of Chevy Camaro configurations, including:• 1993–1997 Camaro Base, Z28, and the Indianapolis 500 Pace Car editions• Also compatible with select Pontiac Firebird models Year Make Model Submodel 1993-1995 Chevrolet Camaro Base 1993 Chevrolet Camaro Indianapolis 500 Pace Car 1993-1997 Chevrolet Camaro Z28 1993-1995 Pontiac Firebird Base 1993-1997 Pontiac Firebird Formula 1993-1997 Pontiac Firebird Trans Am 1994 Pontiac Firebird Trans Am GT ResourcesFor detailed installation procedures, please refer to our Installation Instructions and additional user documentation. Explore more performance upgrades in our Air Intake Systems collection.Compliance & WarrantyNote: Some intakes are not legal for sale or use on pollution-controlled vehicles in California. Always review product specifications for CARB compliance before installation.
K&N 93-98 Jeep Grand Cherokee L6-4.0L Performance Intake Kit K&N 93-98 Jeep Grand Cherokee L6-4.0L Performance Intake Kit
K&N 93-98 Jeep Grand Cherokee L6-4.0L Performance Intake Kit $331.18
This high-performance intake kit is crafted for Jeep Grand Cherokee enthusiasts seeking to enhance their engine’s power and efficiency. Featuring a high-density polyethylene (HDPE) rotationally molded tube, this system optimizes airflow to your engine, ensuring a noticeable boost in horsepower and torque.Key Benefits• Proven increase in horsepower and torque• HDPE tube that improves engine airflow• Washable, reusable high-flow air filter with oiled cotton media lasting up to 100,000 miles• Custom heat shield that protects intake air from elevated engine bay temperatures• Simple installation in under 60 minutes using common toolsInstallation & Technical DetailsEngineered to replace the factory air intake, this performance kit reduces restrictions and enhances throttle response. Its oversized, conical design not only extends filter life but also promotes efficient airflow management. Please note that while a performance boost is assured, certain intakes might not be compliant with pollution regulations in California. For detailed emission and CARB status, please refer to the accompanying documentation.Compatibility InformationCompatible with various Jeep Grand Cherokee models, including the 1993 Base, Laredo, Limited, Orvis, SE, and TSi editions.For more advanced air intake options, visit our Air Intake Systems collection or explore our specialized Jeep Grand Cherokee 1993-1998 Parts selection.
K&N 93-98 Jeep Grand Cherokee Performance Intake Kit K&N 93-98 Jeep Grand Cherokee Performance Intake Kit
K&N 93-98 Jeep Grand Cherokee Performance Intake Kit $331.18
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 1998 Jeep Grand Cherokee 5.9 Limited 1993 Jeep Grand Cherokee Base 1993-1998 Jeep Grand Cherokee Laredo 1993-1998 Jeep Grand Cherokee Limited 1995,1997 Jeep Grand Cherokee Orvis 1994-1995 Jeep Grand Cherokee SE 1997-1998 Jeep Grand Cherokee TSi
K&N 94-01 Acura Integra GS-R L4-1.8L Performance Intake Kit K&N 94-01 Acura Integra GS-R L4-1.8L Performance Intake Kit
K&N 94-01 Acura Integra GS-R L4-1.8L Performance Intake Kit $331.18
Experience guaranteed performance improvements with the K&N 94-01 Acura Integra GS-R Performance Intake Kit. This innovative kit boosts horsepower, torque, and throttle response while enhancing your engine’s sound. Built for both performance enthusiasts and everyday drivers, it features a high-density polyethylene tube that improves airflow and a washable high-flow air filter with oiled cotton media. You'll feel the difference with a guaranteed performance boost that’s been dyno-tested for reliability.Key Features High-Density Polyethylene Tube: Enhances engine airflow to deliver a guaranteed increase in horsepower and torque. Washable High-Flow Air Filter: Made with oiled cotton filter media and designed to last up to 100,000 miles with normal highway driving. Custom Heat Shield: Protects intake air from engine bay heat for improved performance and efficiency. Easy Installation: Complete system installation in less than 60 minutes using basic hand tools. Installation & Maintenance Quick, straightforward installation process. Routine maintenance is minimal, reducing long-term upkeep costs. Legal & CompliancePlease note that some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. Always refer to the product’s CARB status and legal guidelines before installation.Vehicle Fitment Year Make Model Submodel 1994-2001 Acura Integra GS-R 1994-1996 Acura Integra LS 1994-1996 Acura Integra RS 1995-1996 Acura Integra Special Edition Explore our Air Intake Systems collection and check out our K&N Engineering range for more performance upgrades.
K&N 94-02 Dodge Ram L6-5.9L Turbo DSL Performance Intake Kit K&N 94-02 Dodge Ram L6-5.9L Turbo DSL Performance Intake Kit
K&N 94-02 Dodge Ram L6-5.9L Turbo DSL Performance Intake Kit $331.18
Experience a noticeable boost in your engine's performance with this high-performance air intake designed specifically for Dodge Ram 2500 and 3500 models (1994-2002). By replacing your restrictive OEM air box with our enhanced system, you gain increased airflow that directly improves horsepower and torque. Ideal for both daily driving and high-performance settings, this intake kit is engineered to offer reliability and lasting benefits.Key Benefits• High-density polyethylene (HDPE) rotationally molded tube for optimized airflow• Washable, reusable high-flow air filter featuring oiled cotton media• Custom heat shield to reduce engine bay temperatures• Extended maintenance interval – up to 100,000 miles between filter services• Quick installation – typically completed in less than 60 minutesThis performance upgrade is comparable to a K&N Dodge Ram intake kit, providing a competitive edge for enthusiasts looking to maximize their engine's potential.InstallationFor a smooth installation process, please refer to our detailed Installation Instructions. Additional user guidance is available on our User Information page.FitsDesigned to fit Dodge Ram 2500 and 3500 models from 1994 to 2002, this system replaces the original air box for enhanced engine performance. Dodge Ram 2500 (1994-2002, Base) Dodge Ram 3500 (1994-2002, Base) Please note: Some intakes may not be legal for use on pollution-controlled vehicles in California. Always verify CARB status as detailed in the product specifications.Discover more high-performance upgrades in our Air Intake Systems collection.
K&N 94-02 Dodge Ram V10-8.0L Performance Intake Kit K&N 94-02 Dodge Ram V10-8.0L Performance Intake Kit
K&N 94-02 Dodge Ram V10-8.0L Performance Intake Kit $377.98
Experience a noticeable boost in performance with our advanced intake system designed for the 1994-2002 Dodge Ram series. This precision-engineered kit delivers improved throttle response, enhanced engine sound, and increased horsepower and torque on your Dodge Ram V10. Developed as a true K&N performance air intake, this system is perfect for those seeking the K&N 94-02 Dodge Ram intake kit experience.Key Features• HDPE rotationally-molded tube that increases airflow volume for enhanced engine efficiency• Washable, reusable high-flow air filter with oiled cotton media for consistent performance• Extended maintenance intervals—up to 100,000 miles under normal highway conditions• Custom heat shield to protect intake air from engine bay heat• Typically installs in under 60 minutes so you can upgrade your performance quicklyInstallation & ComplianceInstallation is straightforward, making it simple to enhance your Dodge Ram’s performance. Detailed installation instructions are available to guide you through the process, ensuring a secure fit every time. Please note that some intakes may not be legal for use on pollution-controlled vehicles in California or similar states. Always refer to the product specifications for CARB status and recommended maintenance intervals.FitsThis intake system is specifically designed for: Year Make Model Submodel 1994-2002 Dodge Ram 2500 Base 1994-2002 Dodge Ram 3500 Base Upgrade your vehicle today and experience the power and reliability that come with a true K&N Engineering performance upgrade. Learn more about our range of quality intake systems in our K&N Engineering collection.
K&N 94-95 Ford Mustang V8-5.0L Performance Intake Kit K&N 94-95 Ford Mustang V8-5.0L Performance Intake Kit
K&N 94-95 Ford Mustang V8-5.0L Performance Intake Kit $331.18
Experience a dramatic enhancement in performance with the K&N Mustang V8 performance intake kit. This Ford Mustang 5.0L intake kit replaces your factory air intake system, substantially increasing airflow, horsepower, and throttle response. Designed specifically for classic Mustangs, it delivers improved acceleration and dependable performance on the road.Key Features Enhanced engine power and better throttle response across the RPM range High-flow, washable K&N air filter that lasts up to 100,000 miles Engineered to swap out restrictive factory air intake systems Quick and easy installation in about 90 minutes using your car's existing mounts Designed for 1994-1995 Ford Mustang GT, GTS, and SVT Cobra models Backed by K&N’s Million Mile Limited Warranty Installation InstructionsInstallation is simple with clear, downloadable instructions included in your kit. Just follow the step-by-step guide (with detailed PDFs) and use standard tools available in most workshops. The kit is engineered to optimize airflow by channeling air through a high-performance filter directly into your engine.Compatibility & Legal Information Fits 1994-1995 Ford Mustang GT, GTS, and SVT Cobra models Street legal in all 50 U.S. states and compliant with emission standards For additional performance upgrades, visit our Air Intake Systems collection.
K&N 94-96 Chevy Impala SS/Caprice Performance Intake Kit K&N 94-96 Chevy Impala SS/Caprice Performance Intake Kit
K&N 94-96 Chevy Impala SS/Caprice Performance Intake Kit $331.18
Rev up your Chevy’s performance with our advanced cold air intake system designed specifically for 1994-1996 Chevy Impala SS and Caprice models. This performance intake kit delivers real horsepower and torque gains while refining throttle response and engine sound for an exhilarating driving experience.Key Features Increased horsepower and torque for a noticeable performance boost Crafted from high-density polyethylene (HDPE) for long-lasting durability Washable, reusable high-flow air filter featuring premium oiled cotton media Oversized conical filter design with up to a 100,000-mile service interval Custom heat shield to protect intake air from excessive engine heat DIY installation completed in under 60 minutes Enjoy improved airflow and engine efficiency along with reliable, long-term performance for every drive. Optimized for quick installation and maximum power gains, this system is engineered to meet the rigorous demands of everyday highway driving.Fitment and Legal Details Compatible with 1994-1996 Chevy Caprice (Classic and Classic LS) and Chevy Impala SS models Some intakes may not be legal on pollution-controlled vehicles in California – please review product specifications for CARB status For detailed guidance, please refer to our Installation Instructions and User Guide. Explore additional performance upgrades in our Cold Air Intakes collection.
K&N 94-96 Ford F150/Bronco V8-5.0L/5.8L Performance Intake Kit K&N 94-96 Ford F150/Bronco V8-5.0L/5.8L Performance Intake Kit
K&N 94-96 Ford F150/Bronco V8-5.0L/5.8L Performance Intake Kit $331.18
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 1994-1996 Ford Bronco Eddie Bauer 1994-1996 Ford Bronco XL 1994-1996 Ford Bronco XLT 1995-1996 Ford Bronco XLT Sport 1995-1996 Ford F-150 Eddie Bauer 1995-1996 Ford F-150 Special 1994-1996 Ford F-150 XL 1994-1996 Ford F-150 XLT 1995 Ford F-250 Eddie Bauer 1995 Ford F-250 Special 1995 Ford F-250 XL 1995 Ford F-250 XLT 1995 Ford F-350 Eddie Bauer 1995 Ford F-350 Special 1995 Ford F-350 XL 1995 Ford F-350 XLT
K&N 94-97 Chevy S10 / GMC Sonoma L4 2.2L Performance Intake Kit K&N 94-97 Chevy S10 / GMC Sonoma L4 2.2L Performance Intake Kit
K&N 94-97 Chevy S10 / GMC Sonoma L4 2.2L Performance Intake Kit $331.18
Upgrade your truck’s performance with the K&N 94-97 Chevy S10 / GMC Sonoma L4 2.2L Performance Intake Kit. This high-flow system is engineered to boost horsepower, improve throttle response, and produce a more aggressive engine sound by optimizing airflow directly to your engine.Key Features & Benefits HDPE rotationally molded tube that increases airflow for additional power Washable, reusable high-flow air filter with oiled cotton media for up to 100,000 miles between services Custom heat shield to keep intake air cool by preventing engine bay heat interference Quick installation in less than 60 minutes, ensuring a hassle-free upgrade Regulatory compliance notice: some intakes may not be legal on emission-controlled vehicles in California Fits/Compatibility Year Make Model Submodel 1994-1997 Chevrolet S10 Base 1994-1997 Chevrolet S10 LS 1994-1997 GMC Sonoma SL 1994-1997 GMC Sonoma SLE 1994-1997 GMC Sonoma SLS Installation & WarrantyInstallation is straightforward, with detailed guidance available through the Installation Instructions. Enjoy peace of mind with industry-leading quality, backed by K&N’s Lifetime warranty and 24/7 support. Please check your vehicle’s specifications for CARB compliance if you are located in California.Discover additional performance solutions in our Air Intake Systems collection.
K&N 94-97 Ford F-Series Super Duty V8-7.3L Performance Intake Kit K&N 94-97 Ford F-Series Super Duty V8-7.3L Performance Intake Kit
K&N 94-97 Ford F-Series Super Duty V8-7.3L Performance Intake Kit $331.18
Experience a real performance boost with this HDPE intake system engineered for the 1994‑1997 Ford F-Series Super Duty V8‑7.3L engine. Enjoy a guaranteed increase in horsepower and torque as improved airflow enhances your engine’s breathing, giving you extra confidence on and off the road.Key Features• Increased airflow provided by a high-density polyethylene rotationally-molded tube for optimal engine performance.• Washable, reusable high-flow air filter featuring oiled cotton media with service intervals up to 100,000 miles.• Custom-designed heat shield that safeguards intake air from high engine bay temperatures.• Simple installation process typically under 60 minutes, allowing a quick upgrade with minimal tools.Installation & Maintenance• Quick install: Most users complete the setup in less than an hour, making it a hassle-free upgrade.• Long-life filter: Engineered to last up to 100,000 miles under normal highway conditions before service is needed.• Detailed support: See the provided installation instructions for a step-by-step guide.Compatibility Year Make Model Submodel 1997 Ford F-250 Base 1995-1996 Ford F-250 Eddie Bauer 1997 Ford F-250 Lariat 1995-1996 Ford F-250 Special 1994-1997 Ford F-250 XL 1994-1997 Ford F-250 XLT 1997 Ford F-250 HD XL 1997 Ford F-250 HD XLT 1997 Ford F-350 Base 1995 Ford F-350 Eddie Bauer 1995-1996 Ford F-350 Special 1994-1997 Ford F-350 XL 1994-1997 Ford F-350 XLT Please verify CARB compliance for your specific vehicle, as some intakes may not be legal for sale or use on pollution-controlled vehicles in California.For additional performance upgrades, explore our Air Intake Systems collection.
K&N 95-97 Ford Explorer V6-4.0 OHV Performance Intake Kit K&N 95-97 Ford Explorer V6-4.0 OHV Performance Intake Kit
K&N 95-97 Ford Explorer V6-4.0 OHV Performance Intake Kit $331.18
This performance intake kit is engineered specifically for 1995–1997 Ford Explorer V6 4.0 OHV models, designed to boost horsepower and torque while enhancing overall engine efficiency. The K&N intake kit for the Ford Explorer is crafted with a high-density polyethylene (HDPE) rotationally-molded tube to increase airflow and deliver an estimated gain of around 15 HP, helping you achieve a noticeable performance upgrade on your Ford Explorer.Key Features Optimized Airflow: The HDPE tube efficiently increases airflow to maximize engine performance. High-Flow Air Filter: Reusable filter featuring oiled cotton media that can last up to 100,000 miles under normal driving conditions. Custom Heat Shield: Protects intake air from the high temperatures in the engine bay. Quick Installation: Designed for a hassle-free installation process, typically completed in less than 60 minutes with common hand tools. Performance Upgrade: A proven performance intake kit for Ford Explorer enthusiasts seeking reliable enhancements. Installation & WarrantyEnjoy peace of mind with our No-Hassle Lifetime Limited Warranty and detailed installation instructions provided for your convenience. For additional performance upgrades, explore our Air Intake Systems collection.Fitment Details:This part fits the following Ford Explorer variations: Year Make Model Submodel 1995–1997 Ford Explorer Eddie Bauer 1995 Ford Explorer Expedition 1995–1997 Ford Explorer Limited 1995–1997 Ford Explorer Sport 1995–1997 Ford Explorer XL 1995–1997 Ford Explorer XLT Please note: Some intakes are not legal for sale or use on pollution-controlled vehicles in California. Refer to product specifications for CARB status.
K&N 95-97 Ford Ranger / Mazda B2300 L4-2.3L Performance Intake Kit K&N 95-97 Ford Ranger / Mazda B2300 L4-2.3L Performance Intake Kit
K&N 95-97 Ford Ranger / Mazda B2300 L4-2.3L Performance Intake Kit $331.18
Upgrade your engine’s performance with the ultimate K&N 95-97 Ford Ranger performance intake kit and Mazda B2300 2.3L performance intake. This precision-engineered air intake system features a high-density polyethylene (HDPE) rotationally-molded tube designed to boost airflow and deliver increased horsepower and torque, making it an excellent choice for Jeep, truck, and 4WD enthusiasts.Key Benefits• Enhanced airflow with a robust HDPE tube for improved engine efficiency• Washable, reusable high-flow air filter with oiled cotton media that supports up to 100,000 miles between services• Custom heat shield design to help reduce engine bay heat intake• Simple installation process that typically takes less than 60 minutes• CARB compliance may vary—please verify specific vehicle eligibility in the product specificationsInstallation & MaintenanceInstalling the kit is straightforward, ensuring you can quickly enjoy the benefits for your engine’s performance. For detailed guidance, review the installation instructions provided on our website. With minimal regular maintenance, the filter is designed to maintain peak performance over extended highway use.Explore more innovative air intake systems in our Air Intake Systems collection and experience the difference quality parts can make.This Part Fits: Year Make Model Submodel 1995-1997 Ford Ranger Splash 1997 Ford Ranger Sport 1995-1997 Ford Ranger STX 1995-1997 Ford Ranger XL 1995 Ford Ranger XL Sport 1995-1997 Ford Ranger XLT 1995-1997 Mazda B2300 Base 1995-1997 Mazda B2300 SE
K&N 95-98 Toyota Tacoma/4Runner V6-3.4L Performance Air Intake Kit K&N 95-98 Toyota Tacoma/4Runner V6-3.4L Performance Air Intake Kit
K&N 95-98 Toyota Tacoma/4Runner V6-3.4L Performance Air Intake Kit $331.18
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 1996-1998 Toyota 4Runner Limited 1996-1998 Toyota 4Runner SR5 1995-1998 Toyota Tacoma Base 1998 Toyota Tacoma DLX 1998 Toyota Tacoma Limited 1998 Toyota Tacoma Pre Runner 1995-1998 Toyota Tacoma SR5
K&N 95-99 Toyota Tacoma L4-2.4L/2.7L Performance Air Intake Kit K&N 95-99 Toyota Tacoma L4-2.4L/2.7L Performance Air Intake Kit
K&N 95-99 Toyota Tacoma L4-2.4L/2.7L Performance Air Intake Kit $331.18
Boost your Toyota Tacoma’s performance with the K&N Toyota Tacoma air intake—your ideal performance air intake kit designed specifically for 1995-1999 models. Experience enhanced engine airflow that delivers noticeable gains in horsepower and torque while improving overall engine efficiency.Key Features• High-density polyethylene (HDPE) rotationally-molded tube that boosts airflow• Washable, reusable high-flow air filter featuring oiled cotton media for consistent filtering• Custom heat shield to protect intake air from engine bay heat• Extended filter service intervals up to 100,000 miles under normal driving conditions• Quick and straightforward installation in less than 60 minutesInstallation & MaintenanceInstallation is simple enough for any enthusiast—just follow the provided instructions (see the Installation Instructions PDF for a detailed guide). While this kit offers outstanding performance improvements, please note that in some cases, intakes may not be legal on pollution-controlled vehicles in California. Verify the CARB status in our product specifications before purchasing.Fitment & SupportThis product is designed to fit select Toyota models, including the 4Runner and Tacoma across various trims, ensuring you have the right match for your vehicle. Whether you’re looking to purchase a K&N air intake for your Toyota Tacoma or simply need a reliable performance upgrade, our high-quality parts are backed by extensive expertise and round-the-clock support.Explore more advanced air intake systems in our Air Intake Systems collection and drive with confidence.
K&N 96-00 Chevy PickUp V8 Performance Intake Kit K&N 96-00 Chevy PickUp V8 Performance Intake Kit
K&N 96-00 Chevy PickUp V8 Performance Intake Kit $331.18
Experience a significant boost for your Chevy V8 with the K&N 96-00 Chevy PickUp V8 Performance Intake Kit. Designed and built in the USA, this high-performance intake system is dyno tested to deliver improved airflow and a noticeable increase in horsepower, making it an excellent upgrade for truck enthusiasts and performance seekers.Key Features• High-flow intake tube for exceptional engine breathing• Custom-engineered heat shield for optimal performance• Oversized K&N washable high-flow cotton air filter• Guaranteed horsepower improvement and enhanced daily driving performance• Replacement for restrictive OEM air boxInstallation & WarrantyThe kit installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty, ensuring a reliable, long-term upgrade without voiding your factory warranty. Please note, some intakes may be subject to CARB regulations for pollution-controlled vehicles. Detailed fitment information is available in the dedicated Fitment tab.Enhance your truck’s performance and enjoy a refined driving experience—whether you’re towing or cruising. Explore more innovative solutions in our Cold Air Intakes collection and discover the Everything Truck Parts difference today.
K&N 96-00 Chevy/GMC PickUp V8-7.4L Performance Intake Kit K&N 96-00 Chevy/GMC PickUp V8-7.4L Performance Intake Kit
K&N 96-00 Chevy/GMC PickUp V8-7.4L Performance Intake Kit $331.18
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 1996-1997,1999-2000 Chevrolet C2500 Base 1996-1998 Chevrolet C2500 Cheyenne 1999-2000 Chevrolet C2500 LS 1996-1998 Chevrolet C2500 Silverado 1998 Chevrolet C2500 WT 1996-1999 Chevrolet C2500 Suburban Base 1996-1999 Chevrolet C2500 Suburban LS 1996-1997 Chevrolet C2500 Suburban LT 1996-1997,1999-2000 Chevrolet C3500 Base 1996-1998 Chevrolet C3500 Cheyenne 1999-2000 Chevrolet C3500 LS 1996-1998 Chevrolet C3500 Silverado 1996-1997,1999-2000 Chevrolet K2500 Base 1996-1998 Chevrolet K2500 Cheyenne 1999-2000 Chevrolet K2500 LS 1996-1998 Chevrolet K2500 Silverado 1998 Chevrolet K2500 WT 1996-1999 Chevrolet K2500 Suburban Base 1996-1999 Chevrolet K2500 Suburban LS 1996-1997 Chevrolet K2500 Suburban LT 1996-1997,1999-2000 Chevrolet K3500 Base 1996-1998 Chevrolet K3500 Cheyenne 1999-2000 Chevrolet K3500 LS 1996-1998 Chevrolet K3500 Silverado 1996-2000 GMC C2500 Sierra SL 1996-2000 GMC C2500 Sierra SLE 1996-2000 GMC C2500 Sierra SLT 1996-1999 GMC C2500 Suburban Base 1996-1999 GMC C2500 Suburban SLE 1996-1999 GMC C2500 Suburban SLT 1996-2000 GMC C3500 Sierra SL 1996-2000 GMC C3500 Sierra SLE 1996-2000 GMC C3500 Sierra SLT 1996-2000 GMC K2500 Sierra SL 1996-2000 GMC K2500 Sierra SLE 1996-2000 GMC K2500 Sierra SLT 1996-1999 GMC K2500 Suburban Base 1996-1999 GMC K2500 Suburban SLE 1996-1999 GMC K2500 Suburban SLT 1996-2000 GMC K3500 Sierra SL 1996-2000 GMC K3500 Sierra SLE 1996-2000 GMC K3500 Sierra SLT
K&N 96-04 Chevy S-10 V6-4.3L Performance Intake Kit K&N 96-04 Chevy S-10 V6-4.3L Performance Intake Kit
K&N 96-04 Chevy S-10 V6-4.3L Performance Intake Kit $331.18
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 1996-1999,2005 Chevrolet Blazer Base 1996-2004 Chevrolet Blazer LS 1996-2001 Chevrolet Blazer LT 1999-2001 Chevrolet Blazer Trailblazer 2001-2005 Chevrolet Blazer Xtreme 2003-2005 Chevrolet Blazer ZR2 1996-2003 Chevrolet S10 Base 1996-2004 Chevrolet S10 LS 1996-1998 Chevrolet S10 SS 1999-2003 Chevrolet S10 Xtreme 1996-2003 Chevrolet S10 ZR2 2002-2004 Chevrolet S10 ZR5 1996 GMC Jimmy Base 2000-2001 GMC Jimmy Diamond Edition 1998-2000 GMC Jimmy Envoy 1996-1999,2001 GMC Jimmy SL 1996-2001 GMC Jimmy SLE 1996-2001 GMC Jimmy SLS 1996-2001 GMC Jimmy SLT 1996-2004 GMC Sonoma SL 1996-2001 GMC Sonoma SLE 1996-2004 GMC Sonoma SLS
K&N 96-04 Mustang GT V8-4.6L SOHC Performance Intake Kit K&N 96-04 Mustang GT V8-4.6L SOHC Performance Intake Kit
K&N 96-04 Mustang GT V8-4.6L SOHC Performance Intake Kit $331.18
This high-performance intake kit is engineered specifically for the 1996–2004 Mustang GT V8 4.6L SOHC. Developed as a K&N Mustang GT performance intake kit and a Mustang GT 4.6L intake upgrade, it fuses innovative design with premium materials to enhance your engine’s airflow, horsepower, and torque.Key Benefits & Features• Increased airflow for improved horsepower and torque• Enhanced throttle response and a more aggressive engine sound• Durable, high-density polyethylene (HDPE) intake tube• Washable, reusable high-flow air filter featuring oiled cotton media that lasts up to 100,000 miles• Custom-designed heat shield to guard against high engine bay temperatures• Supported by a trusted K&N warranty for long-term performanceInstallation, Legal & Compatibility InformationInstallation is straightforward and can typically be completed in under 60 minutes. Please note, this intake kit is not legal for sale or use on pollution-controlled vehicles in California. Refer to the installation instructions for detailed setup and maintenance guidelines.• Compatible with 1996–2004 Ford Mustang GT models• For additional details on installation and care, visit the Air Intake Systems collection.
K&N 96-98 Chevy Silverado / GMC Sierra V6-4.3L Vortec Performance Intake Kit K&N 96-98 Chevy Silverado / GMC Sierra V6-4.3L Vortec Performance Intake Kit
K&N 96-98 Chevy Silverado / GMC Sierra V6-4.3L Vortec Performance Intake Kit $331.18
Experience a boost in your engine’s performance with our precision-engineered intake system designed to enhance horsepower and improve throttle response. Perfect for truck, Jeep, and 4WD enthusiasts, this kit delivers reliable power gains while keeping installation hassle-free. Whether you’re upgrading your Chevrolet Silverado or GMC Sierra, this product offers an ideal balance of performance and durability.Key Benefits• Uses a high-density polyethylene (HDPE) rotationally-molded tube to maximize airflow and increase torque.• Features a washable, reusable high-flow air filter with oiled cotton media for lasting performance.• Boasts an oversized, conical filter design that can extend filter service intervals up to 100,000 miles under normal highway conditions.• Includes a custom heat shield to protect your intake air from high engine bay temperatures.• Designed for a quick, straightforward installation in under 60 minutes, simplifying upgrades even for beginners.• Great for applications like the K&N performance intake kit, Chevy Silverado V6 intake kit, and GMC Sierra performance intake.Please note that in regions with strict emissions standards, some intakes may not be legal for sale or use on pollution-controlled vehicles. For more details on compatibility and installation support, visit our Air Intake Systems collection. Boost your ride’s performance today and feel the difference on every drive!
K&N 96-99/01 Mustang Cobra Performance Intake Kit K&N 96-99/01 Mustang Cobra Performance Intake Kit
K&N 96-99/01 Mustang Cobra Performance Intake Kit $331.18
Experience a noticeable performance boost with the K&N Mustang Cobra Performance Intake Kit. Designed specifically for select Ford Mustangs, including the 2001 GT Bullitt and SVT Cobra models, this advanced FIPK system replaces the restrictive factory air filter and housing. By streamlining airflow and reducing intake restriction, it helps you maximize engine power and acceleration. Purchase the K&N Mustang intake today and experience the improved throttle response and overall performance.Key Features & Benefits• Optimized airflow to significantly enhance horsepower and torque• Improved throttle response across the entire RPM range• Quick and simple installation—typically completed in 90 minutes or less using factory mounting points• Chrome-topped high-flow, washable air filter designed for up to 100,000 miles• Complete with a heat shield and engineered intake tube for effective air delivery• Backed by K&N’s Million Mile Limited Warranty and street legal in all 50 US statesTechnical Specifications• Part Number: K&N 57-2523-2 FIPK• Filter Life: Up to 100,000 miles (depending on driving conditions)• Installation: Accommodates the factory mass air sensor with standard tools required Year Make Model Submodel 2001 Ford Mustang GT Bullitt 1996-1999, 2001 Ford Mustang SVT Cobra Installation is straightforward and reliable, ensuring you spend less time in the garage and more time on the road. Enhance your Mustang's performance today with this proven, legal, and high-quality intake system. For more performance-enhancing solutions, check out our Air Intake Systems.Additional Resources:• Installation Instructions• User Manual
K&N 97-00 Ford Explorer V6-4.0L Performance Intake Kit K&N 97-00 Ford Explorer V6-4.0L Performance Intake Kit
K&N 97-00 Ford Explorer V6-4.0L Performance Intake Kit $331.18
Experience a tangible improvement in your Ford Explorer V6-4.0L’s performance with our high-density polyethylene (HDPE) intake system. Designed to enhance airflow, this finely engineered kit boosts horsepower and torque while shielding your engine bay from heat. It’s perfect for enthusiasts seeking a balance between performance upgrades, durability, and ease of installation.Key Benefits• HDPE rotationally-molded tube enhances airflow, contributing to horsepower and torque gains (comparable to 13–16 HP and 10–19 lb-ft, depending on vehicle conditions).• Washable, reusable high-flow air filter featuring oiled cotton media for consistent performance.• Custom heat shield protects intake air from high engine bay temperatures.• Straightforward installation—typically completed in less than 60 minutes using standard hand tools.• Extended filter lifespan, delivering up to 100,000 miles between services under normal highway conditions.Installation & PerformanceThis performance intake kit not only provides noticeable improvements in airflow and engine responsiveness, but also ensures a hassle-free installation. With clear instructions and an intuitive design, you can upgrade your vehicle quickly without needing extensive mechanical experience. Please note that while the kit is legal for street use in most states, it may not be approved for sale or use on vehicles equipped with pollution controls in California. Always refer to the CARB status for your specific vehicle.For more performance upgrades, check out our Air Intake Systems collection.Below is the detailed vehicle fit information: Year Make Model Submodel 1997-2000 Ford Explorer Eddie Bauer 1997-2000 Ford Explorer Limited 2000 Ford Explorer Postal 1997-2000 Ford Explorer Sport 1997-1999 Ford Explorer XL 2000 Ford Explorer XL Fleet 1999-2000 Ford Explorer XLS 1997-2000 Ford Explorer XLT 2001 Ford Explorer Sport Trac Base
K&N 97-00 Ford Ranger V6-4.0L Performance Intake Kit K&N 97-00 Ford Ranger V6-4.0L Performance Intake Kit
K&N 97-00 Ford Ranger V6-4.0L Performance Intake Kit $331.18
Experience a significant boost in performance with this precision-engineered intake kit, designed exclusively for the Ford Ranger V6 4.0L. Enjoy increased horsepower, improved throttle response, and an enhanced engine sound—all while delivering the durability and quality you expect. Whether you’re looking for “how to install K&N intake on Ford Ranger” or a “Ford Ranger V6 4.0L intake kit for sale,” this product is your key to unlocking your Ranger’s true potential.Key Features & Benefits• A high-density polyethylene rotationally molded tube maximizes airflow, delivering more power and torque.• The washable, high-flow air filter with oiled cotton media maintains performance with up to 100,000 miles between services.• A custom heat shield protects your intake air from high engine bay temperatures.• A quick installation in less than 60 minutes gets you back on the road faster.• Complies with CARB/California emissions standards—review specifications for legal compliance.Installation & SupportFollow our detailed installation guide for step-by-step instructions—download our Installation Instructions to assist you along the way. If you need further clarification on installation or warranty details, our customer service is available 24/7 to help you maintain peak performance.Discover even more performance upgrades in our Air Intake Systems collection.
K&N 97-01 Jeep Cherokee L6-4.0L Performance Intake Kit K&N 97-01 Jeep Cherokee L6-4.0L Performance Intake Kit
K&N 97-01 Jeep Cherokee L6-4.0L Performance Intake Kit $331.18
Experience a boost in your engine’s performance with our advanced HDPE rotationally molded intake system. Designed to maximize airflow, this system delivers increased horsepower and torque while improving overall vehicle efficiency. Made from durable high-density polyethylene and featuring a washable, high-flow air filter with oiled cotton media, it is engineered to maintain performance for up to 100,000 miles under typical highway conditions. Installation is simple, usually taking less than 60 minutes, making it a practical upgrade for both enthusiasts and professional drivers.Key Features & Benefits• Proven increases in horsepower and torque• Constructed from durable high-density polyethylene for long-lasting performance• Washable, reusable high-flow air filter with oiled cotton media ensures consistent airflow• Oversized, conical filter design minimizes maintenance needs• Quick and easy installation – most setups finish in under 60 minutes• Custom heat shield protects intake air from high engine bay temperatures• Improved engine efficiency through superior air volume controlSpecifications & Compatibility• Compatible with Jeep Cherokee models including Classic (1996, 1998-2001), Country (1996-1997), Limited (1998-2001), SE, and Sport editions (1996-2001)For detailed installation instructions, please refer to our Installation Instructions.Note: Some intakes are not legal for sale or use on any pollution-controlled vehicle in California. Please check the product specifications for CARB status for your specific vehicle.Discover more high-performance options in our Air Intake Systems collection.
American Express Apple Pay Bancontact Diners Club Discover Google Pay iDEAL Mastercard PayPal Shop Pay Visa