The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Corvette models. This air intake starts with an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system has provisions for the factory mass air sensor, inlet air temperature sensor and crankcase vent tube. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID's No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003 Chevrolet Corvette 50th Anniversary Edition 2003 Chevrolet Corvette 50th Anniversary Edition Pace Car 2001-2004 Chevrolet Corvette Base 2001-2004 Chevrolet Corvette Z06

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Corvette models. This air intake starts with an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This MXP air intake system has provisions for the factory mass air sensor, inlet air temperature sensor and crankcase vent tube. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID's No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003 Chevrolet Corvette 50th Anniversary Edition 2003 Chevrolet Corvette 50th Anniversary Edition Pace Car 2001-2004 Chevrolet Corvette Base 2001-2004 Chevrolet Corvette Z06

The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003 Dodge Ram 2500 Laramie 2003-2004 Dodge Ram 2500 SLT 2003-2004 Dodge Ram 2500 ST 2003-2004 Dodge Ram 3500 Laramie 2003-2004 Dodge Ram 3500 SLT 2003-2004 Dodge Ram 3500 ST

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2005 Ford Excursion Eddie Bauer 2003-2005 Ford Excursion Limited 2004-2005 Ford Excursion XLS 2003-2005 Ford Excursion XLT 2004-2007 Ford F-250 Super Duty Harley-Davidson Edition 2004-2007 Ford F-250 Super Duty King Ranch 2003-2007 Ford F-250 Super Duty Lariat 2003-2007 Ford F-250 Super Duty XL 2003-2007 Ford F-250 Super Duty XLT 2004-2007 Ford F-350 Super Duty Harley-Davidson Edition 2003-2007 Ford F-350 Super Duty King Ranch 2003-2007 Ford F-350 Super Duty Lariat 2003-2007 Ford F-350 Super Duty XL 2003-2007 Ford F-350 Super Duty XLT

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2010 INFINITI QX56 Base 2005-2009 Nissan Armada LE 2010-2015 Nissan Armada Platinum 2005-2010 Nissan Armada SE 2005-2006 Nissan Armada SE Off-Road 2011-2015 Nissan Armada SL 2011-2015 Nissan Armada SV 2010 Nissan Armada Titanium 2004 Nissan Pathfinder Armada LE 2004 Nissan Pathfinder Armada SE 2004-2010 Nissan TITAN LE 2008-2015 Nissan TITAN PRO-4X 2011-2015 Nissan TITAN S 2004-2010 Nissan TITAN SE 2011-2015 Nissan TITAN SL 2011-2015 Nissan TITAN SV 2004-2010 Nissan TITAN XE

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2007 Chevrolet Silverado 1500 Classic LT 2007 Chevrolet Silverado 1500 Classic SS 2005 Chevrolet Silverado 1500 HD Base 2005 Chevrolet Silverado 1500 HD LS 2005-2006 Chevrolet Silverado 1500 HD LT 2007 Chevrolet Silverado 1500 HD Classic LT 2005 Chevrolet Silverado 2500 HD Base 2005-2006 Chevrolet Silverado 2500 HD LS 2005-2006 Chevrolet Silverado 2500 HD LT 2005-2006 Chevrolet Silverado 2500 HD WT 2007 Chevrolet Silverado 2500 HD Classic LS 2007 Chevrolet Silverado 2500 HD Classic LT 2007 Chevrolet Silverado 2500 HD Classic WT 2005 Chevrolet Silverado 3500 Base 2005-2006 Chevrolet Silverado 3500 LS 2005-2006 Chevrolet Silverado 3500 LT 2006 Chevrolet Silverado 3500 WT

The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005 Ford F-250 Super Duty Harley-Davidson Edition 2005-2007 Ford F-250 Super Duty King Ranch 2005-2007 Ford F-250 Super Duty Lariat 2005-2007 Ford F-250 Super Duty XL 2005-2007 Ford F-250 Super Duty XLT 2005 Ford F-350 Super Duty Harley-Davidson Edition 2005-2007 Ford F-350 Super Duty King Ranch 2005-2007 Ford F-350 Super Duty Lariat 2005-2007 Ford F-350 Super Duty XL 2005-2007 Ford F-350 Super Duty XLT

The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2007 Chrysler 300 Base 2005-2010 Chrysler 300 Limited 2008-2009 Chrysler 300 LX 2010 Chrysler 300 S 2009 Chrysler 300 Signature Series 2005-2010 Chrysler 300 Touring 2009-2010 Dodge Challenger SE 2006-2007 Dodge Charger Base 2006-2010 Dodge Charger Pursuit 2006-2010 Dodge Charger SE 2006-2010 Dodge Charger SXT 2005-2008 Dodge Magnum SE 2005-2008 Dodge Magnum SXT 2005 Dodge Magnum SXT Special Edition

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems. It delivers high levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. This air intake includes a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID oiled premium air filter for outstanding air flow and filtration. Air is directed through an air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This all adds up to a sophisticated system that increases air flow. This air intake requires custom tuning and is not legal for sale or use in California or in other states adopting California emission standards.Installation InstructionsThis Part Fits: Year Make Model Submodel 2008-2009 Ford Mustang Bullitt 2005-2009 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems. It delivers high levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. This air intake includes a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID non-woven synthetic air filter for outstanding air flow and filtration. Air is directed through an air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This all adds up to a sophisticated system that increases air flow. This air intake requires custom tuning and is not legal for sale or use in California or in other states adopting California emission standards.Installation InstructionsThis Part Fits: Year Make Model Submodel 2008-2009 Ford Mustang Bullitt 2005-2009 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2009 Ford Mustang Base

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2010 INFINITI QX56 Base 2005-2009 Nissan Armada LE 2010-2015 Nissan Armada Platinum 2005-2010 Nissan Armada SE 2005-2006 Nissan Armada SE Off-Road 2011-2015 Nissan Armada SL 2011-2015 Nissan Armada SV 2010 Nissan Armada Titanium 2004 Nissan Pathfinder Armada LE 2004 Nissan Pathfinder Armada SE 2004-2010 Nissan TITAN LE 2008-2015 Nissan TITAN PRO-4X 2011-2015 Nissan TITAN S 2004-2010 Nissan TITAN SE 2011-2015 Nissan TITAN SL 2011-2015 Nissan TITAN SV 2004-2010 Nissan TITAN XE

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2010 Chrysler 300 C 2005-2010 Chrysler 300 C SRT8 2010 Chrysler 300 S 2009-2010 Dodge Challenger R/T 2008-2010 Dodge Challenger SRT8 2006 Dodge Charger Daytona R/T 2006-2010 Dodge Charger Pursuit 2006-2010 Dodge Charger R/T 2008-2010 Dodge Charger SE 2006-2010 Dodge Charger SRT8 2005-2008 Dodge Magnum R/T 2006-2008 Dodge Magnum SRT8

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2010 Chrysler 300 C 2005-2010 Chrysler 300 C SRT8 2010 Chrysler 300 S 2009-2010 Dodge Challenger R/T 2008-2010 Dodge Challenger SRT8 2006 Dodge Charger Daytona R/T 2006-2010 Dodge Charger Pursuit 2006-2010 Dodge Charger R/T 2008-2010 Dodge Charger SE 2006-2010 Dodge Charger SRT8 2005-2008 Dodge Magnum R/T 2006-2008 Dodge Magnum SRT8

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. Some CAD systems connect onto the factory air intake tube while others utilize a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools and is backed by AIRAID's exclusive No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2006-2010 Dodge Charger SRT8 2008 Dodge Magnum SRT8

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013 Chevrolet Corvette 427 2008 Chevrolet Corvette 427 Limited Edition Z06 2006-2013 Chevrolet Corvette Z06 2011 Chevrolet Corvette Z06 Carbon

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2008-2021 Toyota Sequoia Limited 2021 Toyota Sequoia Nightshade 2008-2021 Toyota Sequoia Platinum 2008-2021 Toyota Sequoia SR5 2020-2021 Toyota Sequoia TRD Pro 2018-2021 Toyota Sequoia TRD Sport 2014-2021 Toyota Tundra 1794 Edition 2007-2013 Toyota Tundra Base 2007-2021 Toyota Tundra Limited 2021 Toyota Tundra Nightshade 2010-2021 Toyota Tundra Platinum 2014-2021 Toyota Tundra SR 2007-2011,2014-2021 Toyota Tundra SR5 2021 Toyota Tundra Trail 2015-2017,2019-2021 Toyota Tundra TRD Pro

The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010 Ford F-150 FX2 2009-2010 Ford F-150 FX4 2010 Ford F-150 Harley-Davidson Edition 2009-2010 Ford F-150 King Ranch 2009-2010 Ford F-150 Lariat 2009-2010 Ford F-150 Platinum 2009-2010 Ford F-150 STX 2010 Ford F-150 SVT Raptor 2009-2010 Ford F-150 XL 2009-2010 Ford F-150 XLT 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2008-2009 Ford F-250 Super Duty Harley-Davidson Edition 2008-2010 Ford F-250 Super Duty King Ranch 2008-2010 Ford F-250 Super Duty Lariat 2008-2010 Ford F-250 Super Duty XL 2008-2010 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2008-2009 Ford F-350 Super Duty Harley-Davidson Edition 2008-2010 Ford F-350 Super Duty King Ranch 2008-2010 Ford F-350 Super Duty Lariat 2008-2010 Ford F-350 Super Duty XL 2008-2010 Ford F-350 Super Duty XLT

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2009-2015 Cadillac CTS V

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2009-2015 Cadillac CTS V

All black components, a black powder-coated aluminum intake tube, and an oil-free SYNTHAMAX synthetic filter make the AIRAID MCAD intake system your engine's new best friend - providing an increase in both horsepower and torque. The MCAD removes the stock intake track on your vehicle, and adds an open-element air inlet protected by cold air dam panels, which help protect the filter from hot under-hood air. The innovative filter design of layered, low-restriction 3D dry synthetic media offers increased airflow and outstanding protection from contaminants that can cause engine damage and is also washable and reusable. The MCAD intake system is designed to mount in the factory location with no drilling required, and installation can typically be completed in less than 90 minutes using standard hand tools. Engineered for durability, you can buy with confidence under AIRAID's "No-Hassle" Lifetime Limited Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications at to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2009-2010 Dodge Ram 1500 Laramie 2009-2010 Dodge Ram 1500 SLT 2009-2010 Dodge Ram 1500 Sport 2009-2010 Dodge Ram 1500 ST 2009-2010 Dodge Ram 1500 TRX 2009-2010 Dodge Ram 1500 TRX4 2011-2018 Ram 1500 Big Horn 2012-2018 Ram 1500 Express 2014 Ram 1500 HFE 2011-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2011-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2011-2016 Ram 1500 Outdoorsman 2013 Ram 1500 R/T 2015-2018 Ram 1500 Rebel 2011-2018 Ram 1500 SLT 2014-2018 Ram 1500 Special Service 2011-2018 Ram 1500 Sport 2011-2012 Ram 1500 ST 2011-2018 Ram 1500 Tradesman 2012 Ram 1500 Tradesman HD 2019 Ram 1500 Classic Big Horn 2019-2021 Ram 1500 Classic Express 2019 Ram 1500 Classic Lone Star 2019-2021 Ram 1500 Classic SLT 2019-2021 Ram 1500 Classic Special Service 2019-2021 Ram 1500 Classic Tradesman 2019-2021 Ram 1500 Classic Warlock 2013-2018 Ram 2500 Big Horn 2011-2017 Ram 2500 Laramie 2014-2015 Ram 2500 Laramie Limited 2011-2017 Ram 2500 Laramie Longhorn 2016-2018 Ram 2500 Limited 2013-2015 Ram 2500 Lone Star 2012-2016 Ram 2500 Outdoorsman 2011-2013 Ram 2500 Power Wagon 2011-2018 Ram 2500 SLT 2011-2013 Ram 2500 ST 2013-2018 Ram 2500 Tradesman 2013-2018 Ram 3500 Big Horn 2011-2018 Ram 3500 Laramie 2014-2015 Ram 3500 Laramie Limited 2013-2018 Ram 3500 Laramie Longhorn 2016-2018 Ram 3500 Limited 2013-2015,2017 Ram 3500 Lone Star 2011-2018 Ram 3500 SLT 2011-2013 Ram 3500 ST 2013-2018 Ram 3500 Tradesman

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010-2019 Ford Flex Limited 2010-2013 Ford Flex SE 2010-2017 Ford Flex SEL 2011-2012 Ford Flex Titanium 2010-2017 Ford Taurus SHO 2010-2016 Lincoln MKS EcoBoost 2017,2019 Lincoln MKT Base 2010-2016 Lincoln MKT EcoBoost 2013-2018 Lincoln MKT Limousine 2012,2017-2018 Lincoln MKT Livery 2018-2019 Lincoln MKT Reserve

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. Some CAD systems connect onto the factory air intake tube while others utilize a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools and is backed by AIRAID's exclusive No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010-2019 Ford Flex Limited 2010-2013 Ford Flex SE 2010-2017 Ford Flex SEL 2011-2012 Ford Flex Titanium 2010-2017 Ford Taurus SHO 2010-2016 Lincoln MKS EcoBoost 2017,2019 Lincoln MKT Base 2010-2016 Lincoln MKT EcoBoost 2018-2019 Lincoln MKT Reserve

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2014 Ford F-150 FX2 2013-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2011-2014 Ford F-150 Platinum 2010-2014 Ford F-150 SVT Raptor 2013-2014 Ford F-150 XLT

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2023 Toyota 4Runner 40th Anniversary Edition 2010-2024 Toyota 4Runner Limited 2020-2021 Toyota 4Runner Nightshade 2010-2024 Toyota 4Runner SR5 2018-2024 Toyota 4Runner SR5 Premium 2010-2016,2021-2022 Toyota 4Runner Trail 2017-2024 Toyota 4Runner TRD Off-Road 2018-2024 Toyota 4Runner TRD Off-Road Premium 2015-2024 Toyota 4Runner TRD Pro 2022-2024 Toyota 4Runner TRD Sport 2020-2021 Toyota 4Runner Venture 2010-2014 Toyota FJ Cruiser Base

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsInstallation InstructionsUser 1User 1This Part Fits: Year Make Model Submodel 2011-2014 Chrysler 300 Base 2011-2020 Chrysler 300 C 2012-2014 Chrysler 300 C Luxury 2015-2017 Chrysler 300 C Platinum 2011-2012,2015-2020 Chrysler 300 Limited 2012-2021 Chrysler 300 S 2012-2014 Chrysler 300 SRT8 2013 Chrysler 300 SRT8 Core 2018-2021 Chrysler 300 Touring 2018-2021 Chrysler 300 Touring L 2016 Dodge Challenger 392 Hemi Scat Pack Shaker 2017-2021 Dodge Challenger GT 2011-2021 Dodge Challenger R/T 2017-2019 Dodge Challenger R/T 392 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016-2021 Dodge Challenger R/T Scat Pack 2016 Dodge Challenger R/T Shaker 2014 Dodge Challenger Rallye Redline 2015 Dodge Challenger Scat Pack 2011 Dodge Challenger SE 2015-2018 Dodge Challenger SRT 392 2011-2014 Dodge Challenger SRT8 2012-2021 Dodge Challenger SXT 2012,2015-2018 Dodge Challenger SXT Plus 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Challenger T/A 392 2017-2018 Dodge Charger Daytona 2017-2018 Dodge Charger Daytona 392 2018-2021 Dodge Charger GT 2011-2021 Dodge Charger Pursuit 2011-2018,2020-2021 Dodge Charger R/T 2017-2018 Dodge Charger R/T 392 2015-2016 Dodge Charger R/T Road & Track 2015-2018 Dodge Charger R/T Scat Pack 2020-2021 Dodge Charger Scat Pack 2011-2017 Dodge Charger SE 2015-2018 Dodge Charger SRT 392 2012-2014 Dodge Charger SRT8 2012-2021 Dodge Charger SXT 2012,2018 Dodge Charger SXT Plus

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011-2020 Chrysler 300 C 2012-2014 Chrysler 300 C Luxury 2015-2017 Chrysler 300 C Platinum 2018 Chrysler 300 Limited 2012-2019,2021-2023 Chrysler 300 S 2018 Chrysler 300 Touring 2011-2023 Dodge Challenger R/T 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Charger Daytona 2011-2023 Dodge Charger Pursuit 2011-2023 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2011-2014 Dodge Charger SE

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011-2020 Chrysler 300 C 2012-2014 Chrysler 300 C Luxury 2015-2017 Chrysler 300 C Platinum 2018 Chrysler 300 Limited 2012-2019,2021-2023 Chrysler 300 S 2018 Chrysler 300 Touring 2011-2023 Dodge Challenger R/T 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Charger Daytona 2011-2023 Dodge Charger Pursuit 2011-2023 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2011-2014 Dodge Charger SE

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011-2020 Chrysler 300 C 2012-2014 Chrysler 300 C Luxury 2015-2017 Chrysler 300 C Platinum 2018 Chrysler 300 Limited 2012-2019,2021-2023 Chrysler 300 S 2018 Chrysler 300 Touring 2011-2023 Dodge Challenger R/T 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Charger Daytona 2011-2023 Dodge Charger Pursuit 2011-2023 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2011-2014 Dodge Charger SE

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011-2020 Chrysler 300 C 2012-2014 Chrysler 300 C Luxury 2015-2017 Chrysler 300 C Platinum 2018 Chrysler 300 Limited 2012-2019,2021-2023 Chrysler 300 S 2018 Chrysler 300 Touring 2011-2023 Dodge Challenger R/T 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Charger Daytona 2011-2023 Dodge Charger Pursuit 2011-2023 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2011-2014 Dodge Charger SE

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang Base

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang Base

AIRAID Modular Intake Tubes (MIT) provide a smooth air way to the throttle body that improves air flow up to an additional 400 CFM over restrictive stock intake tubes in order to give your engine more horsepower and torque. MITs are constructed from cross-linked, high-density polyethylene, built each for a specific vehicle make and model, and can be used to simply replace your stock air intake tube or can be added to an AIRAID Cold Air Dam QuickFit series system. Installation is easy and can be done in only a few minutes with a few simple tools. Mounting hardware is included along with easy-to-follow instructions. Some AIRAID air intake components are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2012-2013 Ford Mustang Boss 302 2011-2014 Ford Mustang GT

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang GT

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems. It delivers high levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. This air intake includes a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID oiled premium air filter for outstanding air flow and filtration. Air is directed through an air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. This all adds up to a sophisticated system that increases air flow. This air intake requires custom tuning and is not legal for sale or use in California or in other states adopting California emission standards.Installation InstructionsThis Part Fits: Year Make Model Submodel 2012-2013 Ford Mustang Boss 302 2011-2014 Ford Mustang GT

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang Base