$25 to $50

The high temperature red 2-Ply reinforced silicone hump coupler is designed to connect to a 3-1/2"OD tube and is 2-1/4" long. Standard stainless steel worm-gear #056 clamps provides tight connections, durability, and is corrosion resistant for industrial, commercial, truck, off-road, and racing applications.

The high temperature 2-Ply reinforced silicone elbow coupler is designed to connect to a (3-1/2" x 3")OD tube and is 7" long. Standard stainless steel worm-gear #048 & #056 clamps provides tight connections, durability, and is corrosion resistant for industrial, commercial, truck, off-road, and racing applications.

The high temperature red 1-Ply reinforced silicone hump coupler is designed to connect to a (3-1/2" x 3-3/4")OD tube and is 3" long. Standard stainless steel worm-gear #056 & #060 clamps provides tight connections, durability, and is corrosion resistant for industrial, commercial, truck, off-road, and racing applications.

The high temperature 3-PLY reinforced silicone coupler is designed to connect to a 3" ID tube. Standard stainless steel worm-gear #048 clamps provides tight connections, durability and is corrosion resistance for industrial, commercial, truck, off-road and racing applications. NOTE: Not for use on pressurized side of supercharged or turbocharged applications.

The high temperature 2-PLY reinforced silicone straight coupler is designed to connect to a (3" x 2-1/2")OD tube. The coupling is 3" long with a 90 degree bend reducer. Standard stainless steel worm-gear #044 & #048 clamps provides tight connections, durability, and is corrosion resistance for industrial, commercial, truck, off-road, and racing applications. NOTE: Not for use on pressurized side of supercharged or turbocharged applications.

The high temperature 3-PLY reinforced silicone reducer coupler is designed to connect to a (3" x 2-3/4") ID tube and is 3" long. Standard stainless steel worm-gear #044 & #048 clamps provides tight connections, durability and is corrosion resistance for industrial, commercial, truck, off-road and racing applications.

The high temperature injection molded silicone bellow coupler is designed to connect to a 4-1/4"OD tube and is 3" long. Standard stainless steel worm-gear #072 clamps provides tight connections, durability, and is corrosion resistant for industrial, commercial, truck, off-road, and racing applications.

The high temperature 3-Ply reinforced silicone hump coupler is designed to connect to a 6-1/4"ID tube and is 2-3/4" long. Standard stainless steel worm-gear #104 clamps provides tight connections, durability and is corrosion resistance for industrial, commercial, truck, off-road and racing applications. NOTE: Not for use on pressurized side of supercharged or turbocharged applications.

The high temperature 3-PLY reinforced silicone straight coupler is designed to connect to a 6" ID tube and is 3" long. Standard stainless steel worm-gear #104 clamps provides tight connections, durability and is corrosion resistance for industrial, commercial, truck, off-road and racing applications. NOTE: Not for use on pressurized side of supercharged or turbocharged applications.

The high temperature 2-Ply reinforced silicone elbow reducer coupler is designed to connect to a (4" x 3-1/2")OD tube and is 3" long. Standard stainless steel worm-gear #044 & #056 clamps provides tight connections, durability, and is corrosion resistant for industrial, commercial, truck, off-road, and racing applications.

3-1/4 IN Internal Diameter: This 2-1/2 IN long coupling is designed to connect to a tube with a 3-1/4 IN diameter. It's commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Flexible Bellows Silicone: Its bellows design is extremely flexible, making it easy to install, even when dealing with misaligned tubes. It allows for ample expansion, movement and vibration in-between two hard pipes.Stainless Steel Clamps: Two corrosion-resistant stainless-steel worm clamps (#052) are included, providing a secure seal for virtually any application.Fitment Note: Not for use on pressurized side of supercharged or turbocharged applications.Direct Replacement for P/N 05-01416.

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and togeth er work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUV's. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUV's. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

The high temperature 2-Ply reinforced silicone elbow coupler is designed to connect to a (4" x 3")OD tube. Standard stainless steel worm-gear #044 and #064 worm clamps provides tight connections, durability and is corrosion resistant for industrial, commercial, truck, off-road and racing applications.

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.This Part Fits: Year Make Model Submodel 2017-2018 Ford F-250 Super Duty King Ranch 2017-2018 Ford F-250 Super Duty Lariat 2017-2018 Ford F-250 Super Duty Platinum 2017-2018 Ford F-250 Super Duty XL 2017-2018 Ford F-250 Super Duty XLT 2017-2018 Ford F-350 Super Duty King Ranch 2017-2018 Ford F-350 Super Duty Lariat 2017-2018 Ford F-350 Super Duty Platinum 2017-2018 Ford F-350 Super Duty XL 2017-2018 Ford F-350 Super Duty XLT

aFe POWER ABS intake covers help reduce air intake temperature and engine noise. These covers provides a stealthy yet aggressive style without hurting the performance of the intake. This cover snaps onto the air intake housing with magnets making for a hassle-free installation.Installation Instructions

For those of you who have an aFe Power Stage-2 intake system for the 2012-2014 Ford F-150 EcoBoost V6-3.5L (tt), aFe Power now offers an intake cover to help reduce air intake noise. This cover is constructed of vacuum formed ABS plastic material that snaps onto the top of the lower half of the factory airbox. The aFe Power plate is riveted on top letting everyone know what brand of intake you have. This cover provides a stealthy yet aggressive style without hurting the performance of the intake.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2012-2014 Ford F-150 FX2 2012-2014 Ford F-150 FX4 2012-2014 Ford F-150 King Ranch 2012-2014 Ford F-150 Lariat 2013-2014 Ford F-150 Limited 2012-2014 Ford F-150 Platinum 2012-2014 Ford F-150 XL 2012-2014 Ford F-150 XLT

aFe POWER Magnum SHIELD Pre-Filters protect your performance air filter and extends your filter cleaning intervals by removing large particles like twigs and bugs from the air stream prior to the air filter. These pre-filters are made of a dry weave fabric that does not attract dirt and cleans with soap and water. The aFe POWER logo is silk screened on the pre-filter to let everyone know an aFe Cold Air Intake is powering your rig. Made from dry weave polyester fabric, the pre-filter repels water and dirt with minimal effect on air flow. Simple to remove and easily cleaned with soap and water. Pre-filters protect your performance air filter and extends your filter cleaning intervals. Each pre-filter is made for the filter its paired with. Just slip on the aFe POWER Pre-filter with its convenient pull tabs for instant protection. This part number comes with 2 pre-filters.

Constructed with 100-percent polyurethane on top and bottom, this high flow, oiled performance filter will outflow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Constructed with 100-percent polyurethane on top and bottom, this high flow, oiled performance filter will outflow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Constructed with 100-percent polyurethane on top and bottom, this high flow, oiled performance filter will outflow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Constructed with 100-percent polyurethane on top and bottom, this high flow, oiled performance filter will outflow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Constructed with 100-percent polyurethane on top and bottom, this high flow, oiled performance filter will outflow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

This show quality chrome drop pan (7/8") allows you to use a 14" round performance air filter with applications with a tight hood clearance. This pan drops the filter 7/8" to help clear.

Magnum FLOW Pro 5R Air Filter Power Cleaner, Gal. DiscontinuedMaterial Safety Data SheetMaterial Safety Data Sheet

Magnum FLOW Pro DRY S Air Filter Power Cleaner, Gal. DiscontinuedMaterial Safety Data SheetMaterial Safety Data Sheet

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.Installation InstructionsThis Part Fits: Year Make Model Submodel 2014-2016 BMW 228i Base 2015-2016 BMW 228i xDrive Base 2013-2018 BMW 320i Base 2013-2018 BMW 320i xDrive Base 2012-2016 BMW 328i Base 2014-2016 BMW 328i GT xDrive Base 2013-2016 BMW 328i xDrive Base 2014-2016 BMW 428i Base 2015-2016 BMW 428i Gran Coupe Base 2014-2016 BMW 428i xDrive Base 2015-2016 BMW 428i xDrive Gran Coupe Base

This coupling features a 30° angle and is designed to connect to tubes with a 3-1/2” diameter. It’s commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects. Its silicone construction features a layer of polyester reinforcement, making it extremely durable and less prone to deformation, tearing, and other damage, than average couplings. Two corrosion-resistant stainless-steel worm clamps are included, providing a secure seal for virtually any application.

For those of you who have an aFe Power Stage-2 intake system for the 2011-2014 Ford Edge V6-3.5L, aFe Power now offers an intake cover to help reduce air intake noise. This cover is constructed of vacuum formed ABS plastic material that snaps right onto the intake housing. This cover provides a stealthy yet aggressive style without hurting the performance of the intake. Lightweight Vacuum Form Plastic Cover: Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. Hassle-Free Installation: This cover snaps right onto the air intake housing for the aFe Power Stage-2 intake for a simple, hassle-free installation.This Part Fits: Year Make Model Submodel 2009-2014 Ford Edge Limited 2009-2014 Ford Edge SE 2009-2014 Ford Edge SEL 2009-2010 Ford Edge Sport 2011-2017 Ford Explorer Base 2011-2017 Ford Explorer Limited 2016-2019 Ford Explorer Platinum 2013-2019 Ford Explorer Sport 2011-2017 Ford Explorer XLT 2010-2019 Ford Taurus SHO 2010-2016 Lincoln MKS EcoBoost

Soft Part Replacement Packages for existing air intake systems 51-82722 & 54-82722This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner

3 IN to 2-1/4 IN Reducer: This coupling features a 35 Degree angle and is designed to connect to tubes with a 3 IN and 2-1/4 IN diameter. It's commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Silicone Construction: Its silicone construction features two layers of polyester reinforcement, making it extremely durable and less prone to deformation, tearing, and other damage, than average couplings. The built-in 1 IN vent allows for easy connection to a PCV line.Stainless Steel Clamps: Two corrosion-resistant stainless-steel worm clamps (#032 & #044) are included, providing a secure seal for virtually any application.Fitment Note: Not for use on pressurized side of supercharged or turbocharged applications.Direct Replacement for P/N 05-01466.

This bracket kit is designed to be used with the aFe Dynamic Air Scoop (P/N: 54-82039) on vehicles not equipped with factory bang bars. It allows to securely mount the Dynamic Air Scoop to the trucks frame rail. All necessary hardware is included to provide a hassle-free installation. No drilling or cutting required.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010 Dodge Ram 2500 Laramie 2010 Dodge Ram 2500 SLT 2010 Dodge Ram 2500 ST 2010 Dodge Ram 2500 SXT 2010 Dodge Ram 2500 TRX 2010 Dodge Ram 3500 Laramie 2010 Dodge Ram 3500 SLT 2010 Dodge Ram 3500 ST 2010 Dodge Ram 3500 SXT 2011-2012 Ram 2500 Laramie 2011-2012 Ram 2500 Laramie Longhorn 2012 Ram 2500 Outdoorsman 2011-2012 Ram 2500 SLT 2011-2012 Ram 2500 ST 2011-2012 Ram 3500 Laramie 2011-2012 Ram 3500 Laramie Longhorn 2011-2012 Ram 3500 SLT 2011-2012 Ram 3500 ST

This cover is constructed of vacuum formed ABS plastic material that bolts right up to the housing. The aFe logo is front and center letting everyone know what brand of intake you have. This cover provides a stealthy yet aggressive style without hurting the performance of the intake. Simple hassle-free installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2021 Dodge Challenger SRT Hellcat 2015-2020 Dodge Charger SRT Hellcat 2021 Dodge Charger SRT Hellcat Widebody

This cover is constructed of vacuum formed ABS plastic material that bolts right up to the housing. The aFe logo is front and center letting everyone know what brand of intake you have. This cover provides a stealthy yet aggressive style without hurting the performance of the intake. Simple hassle-free installation.This Part Fits: Year Make Model Submodel 2015-2018 Ford F-150 King Ranch 2015-2018 Ford F-150 Lariat 2015-2018 Ford F-150 Platinum 2016-2018 Ford F-150 SSV 2015-2018 Ford F-150 XL 2015-2018 Ford F-150 XLT

This cover is constructed of vacuum formed ABS plastic material that bolts right up to the housing. The aFe logo is front and center letting everyone know what brand of intake you have. This cover provides a stealthy yet aggressive style without hurting the performance of the intake. Simple hassle-free installation.Installation InstructionsThis Part Fits: Year Make Model Submodel 2014-2018 Ram 1500 Big Horn 2016-2017 Ram 1500 HFE 2014-2018 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2018 Ram 1500 Laramie Longhorn 2015-2018 Ram 1500 Limited 2014-2018 Ram 1500 Lone Star 2014-2016 Ram 1500 Outdoorsman 2014-2018 Ram 1500 SLT 2018 Ram 1500 Sport 2014-2018 Ram 1500 Tradesman 2019 Ram 1500 Classic Laramie 2019 Ram 1500 Classic Tradesman

This cover is constructed of vacuum formed ABS plastic material that bolts right up to the housing. The aFe logo is front and center letting everyone know what brand of intake you have. This cover provides a stealthy yet aggressive style without hurting the performance of the intake. Simple hassle-free installation.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2016 Ford F-150 King Ranch 2011-2017 Ford F-150 Lariat 2013-2014,2016 Ford F-150 Limited 2011-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2011-2017 Ford F-150 XL 2011-2017 Ford F-150 XLT