Close ×
Choose your Vehicle
Select your vehicle for a custom shopping experience
Snow Performance 3in. Injection Ring (Hose Clamp Style)
$206.66
$285.33
Snow Performance 3in. Injection Ring (Hose Clamp Style)
Snow Performance 4 Cylinder Direct Port Upgrade (No Nozzles)
$211.25
$291.66
For those running high HP applications that depend on the water-methanol for tuning Snow Performance offers direct port water-meth upgrades to directly mount a nozzle into each cylinder. Comes with 4 CYL distribution block, high flow solenoid upgrade, and all plumbing to install a nozzle in each cylinder (Quick-Connect Fittings/High Temp Nylon). NOTE: Nozzles not included and must be purchased separately.
Snow Performance 450LPH E85 Compatible Walbro Fuel Pump (In Tank)
$197.93
$273.27
Snow Performance 450LPH E85 Compatible Walbro Fuel Pump (In Tank)
Snow Performance 470LPH E85 Compatible Walbro Fuel Pump (In Tank)
$221.35
$305.61
Snow Performance 470LPH E85 Compatible Walbro Fuel Pump (In Tank)
Snow Performance 4in Quick Disconnect Clamp Assembly
$131.69
$181.82
Snow Performance 4in Quick Disconnect Clamp Assembly
Snow Performance 4in. Injection Ring (Hose Clamp Style)
$206.66
$285.33
Snow Performance 4in. Injection Ring (Hose Clamp Style)
Snow Performance 4in. Injection Ring (V-Band Style)
$181.87
$251.09
Snow Performance 4in. Injection Ring (V-Band Style)
Snow Performance 535LPH at 40psi Fuel Pump (In Tank)
$200.76
$277.19
Snow Performance 535LPH at 40psi Fuel Pump (In Tank)
Snow Performance 5in Quick Disconnect Assembly
$125.42
$173.17
Snow Performance 5in Quick Disconnect Assembly
Snow Performance 6in Water Methanol Boot w/Nozzle Holders Installed
$106.60
$147.19
Snow Performance 6 Inch Water Methanol Boot With Nozzle Holders Installed
Snow Performance 7 Gallon Reservoir (incl. brackets/check valve/tubing)
$158.43
$218.74
Snow Performance 10 Gallon Tank upgrade is designed for all diesel truck owners looking to carry a large amount of water-methanol fluid with out hindering bed space. Custom molded to fit in the void area between the truck bed floor, top of bed and tire well. Comes complete with a high flow Solenoid, screen fitting, custom straps, and 20' of tubing. Designed to go 800+ miles while towing.
Snow Performance Billet Adjustable (0-475PSI) CO2 Regulator w/Gauges
$140.93
$194.59
Snow Performance 0-475 PSI adjustable pressure regulators are designed for high-performance and demanding applications. These regulators can run your boost control solenoids, air shifter, or parachute launcher. Each regulator is equipped with one high-pressure (bottle pressure) port and two low-pressure (adjustable 0-475 PSI) ports. These regulators are compatible with air, CO2, nitrogen, or nitrous oxide, making them an adaptable solution for a wide range of uses.
Snow Performance Billet Fixed (100PSI) CO2 Regulator w/Gauges
$136.86
$188.96
Snow Performance fixed (100PSI) pressure regulator are designed for high-performance and demanding applications. These regulators can run your boost control solenoids, air shifter, or parachute launcher. The Billet Aluminum Regulators provide 100PSI preset, fixed flow pressures from a single pressure source. Each regulator is equipped with one high-pressure (bottle pressure) port and two low-pressure (100PSI) ports. These regulators are compatible with air, CO2, nitrogen, or nitrous oxide, making them an adaptable solution for a wide range of uses.
Snow Performance Braided SS Line Trunk Mount Upgrade (4AN SS Braided Line Systems)
$158.43
$218.74
Want to move your standard 3QT Snow Performance Water-Methanol Tank or custom tank to the trunk of any vehicle? The rear mount upgrade comes with everything to safely ensure your water-meth system can be moved to the trunk. Comes with 15' stainless steel braided line, high flow solenoid upgrade, required AN fittings.
Snow Performance Carb Spacer Plate - 4150 Style
$125.42
$173.16
1" thick adapter plates allow for a clean and easy install of any Snow Performance nozzles on carbureted applications using a Holley, Edlebrock, or Carter 4150 Carburetor. Comes with necessary gaskets/studs needed for install. (Machined with (2) 1/8" NPT ports) Warning! When using a injection plate a solenoid upgrade part# 40060 must be used to prevent vacuum siphoning.
Snow Performance Dodge Challenger/Charger Hellcat Throttle Body Spacer Injection Plate
$121.46
$167.70
Snow Performance Throttle Body Spacer Injection Plates are the easiest, best selling way to mount water-meth or nitrous nozzles on your 2008+ Dodge Challenger /Charger 5.7L / 6.1L / 6.4L. Simply fit between the throttle body and intake manifold and enjoy custom placement of two 1/8" NPT ports. Warning! When using a throttle body injection plate a solenoid upgrade part# 40060 must be used to prevent vacuum siphoning.This Part Fits:
Year
Make
Model
Submodel
2018
Dodge
Challenger
SRT Demon
2015-2020
Dodge
Challenger
SRT Hellcat
2019-2020
Dodge
Challenger
SRT Hellcat Redeye
2019-2020
Dodge
Challenger
SRT Hellcat Redeye Widebody
2018-2020
Dodge
Challenger
SRT Hellcat Widebody
2015-2020
Dodge
Charger
SRT Hellcat
2018-2020
Jeep
Grand Cherokee
Trackhawk
Snow Performance Dominator Carb Spacer Plate - 4500 Style
$125.42
$173.16
1" thick adapter plates allow for a clean and easy install of any Snow Performance nozzles on carbureted applications using a Holley, Edlebrock, or Carter 4500 Carburetor. Comes with necessary gaskets/studs needed for install. (Machined with (2) 1/8" NPT ports) Warning! When using a injection plate a solenoid upgrade part# 40060 must be used to prevent vacuum siphoning.
Snow Performance Extreme Environment 300psi UHO Water Injection Pump
$206.95
$285.73
Snow Performance 300 PSI UHO methanol injection pumps offer unsurpassed pressure, technology, and reliability. All 300 PSI pumps are U.S.A made and come individually tested to ensure quality and reliability. Although similar looking pumps exist, they do not come with the handful of propriety features that set the Snow Performance,, Features:,, , Dual EPDM Seals Offer Greater PSI Ratings to Be Achieved Safer and Longer, Proprietary Internal Wiring Offers Lower Amperage Draw than Similar Looking Pumps, Built in Thermal Breaker Allows Pump to Run Constantly Without Damaging Pump Internals, 3/8" NPT Inlet / Outlet, (2) 3/8" NPT to 4AN Fittings Included
Snow Performance Extreme Environment 300psi UHO Water Pump (Braided Line)
$206.95
$285.73
Upgrades your water-meth pump from the factory when purchasing a injection kit at the same time (Drop ship only)
Snow Performance Flex Fuel Sensor Manifold Assembly
$131.81
$181.99
Snow Performance Flex Fuel Sensor Manifold Assembly
Snow Performance Fuel Pump Relay Wiring Kit
$138.40
$191.09
Snow Performance Fuel Pump Relay Wiring Kit
Snow Performance Hellcat 105mm Throttle Body Water-Methanol Injection Plate (req. 40060)
$121.46
$167.70
Snow Performance Throttle Body Spacer Injection Plates are the easiest, best selling way to mount water-meth or nitrous nozzles on your 105mm Hellcat throttle body. Simply fit between the throttle body and intake manifold and enjoy custom placement of two 1/8" NPT ports. Warning! When using a throttle body injection plate a solenoid upgrade part# 40060 must be used to prevent vacuum siphoning.
Snow Performance Hi-Flow Pump Supply Upgrade
$117.10
$161.69
Snow Performance Hi-Flow Pump Supply Upgrade
Snow Performance Injector Spacer 13mm (Set of 8)
$100.97
$139.41
Snow Performance Injector Spacer 13mm (Set of 8)
Snow Performance Low Pressure Safety Switch (Nylon Tubing)
$100.92
$139.33
This product is designed as a failsafe in case your water-methanol system is not functioning properly. The included pressure switch monitors pressure between the W/M pump and the injection nozzles. If the W/M system is not making proper pressure (due to a failed pump, broken line, etc.), the included LED will alert the driver of an issue. The switch can also be wired to your aftermarket EFI system or electronic boost controller to automatically cut boost, retard timing, etc. Includes a user-adjustable W/M pressure safety switch (35-100 PSI), a Snow Performance Water Methanol pressure gauge, a high-intensity LED, and an inline adapter manifold for -4an lines.
Snow Performance Low Pressure Safety Switch (Stainless Steel Braided Line)
$100.92
$139.33
This product is designed as a failsafe in case your water-methanol system is not functioning properly. The included pressure switch monitors pressure between the W/M pump and the injection nozzles. If the W/M system is not making proper pressure (due to a failed pump, broken line, etc.), the included LED will alert the driver of an issue. The switch can also be wired to your aftermarket EFI system or electronic boost controller to automatically cut boost, retard timing, etc. Includes a user-adjustable W/M pressure safety switch (35-100 PSI), a Snow Performance Water Methanol pressure gauge, a high-intensity LED, and an inline adapter manifold for -4an lines.
Snow Performance Snow Performance 2014+ GM Truck Throttle Body Spacer Injection Plate
$121.46
$167.70
Snow Performance Throttle Body Spacer Injection Plates are the easiest, best selling way to mount water-meth or nitrous nozzles on your 2014+ GM truck throttle body(LT Gen V). Simply fit between the throttle body and intake manifold and enjoy custom placement of two 1/8" NPT ports. Warning! When using a throttle body injection plate a solenoid upgrade part# 40060 must be used to prevent vacuum siphoning.
Snow Performance VC-30 Water Controller (Boost)
$186.89
$258.04
Snow Performance VC-30 Water Controller (Boost)
Snow Performance Water Pump Extreme Environment 300psi (Pump Only)
$197.09
$272.14
Upgrades your water-meth pump from the factory when purchasing a injection kit at the same time (Drop ship only)
Snow Performance Water Quad Nozzle Stainless Steel Braided Line Upgrade
$123.73
$170.84
Snow Performance Water Quad Nozzle Stainless Steel Braided Line Upgrade
Snow Performance Water Tank & Pump Bracket 2015+ Ford Mustang
$175.59
$242.44
Snow Performance Water Tank & Pump Bracket 2015+ Ford MustangThis Part Fits:
Year
Make
Model
Submodel
2019-2020
Ford
Mustang
Bullitt
2024-2025
Ford
Mustang
Dark Horse
2024-2025
Ford
Mustang
Dark Horse Premium
2015-2025
Ford
Mustang
EcoBoost
2015-2025
Ford
Mustang
EcoBoost Premium
2015-2025
Ford
Mustang
GT
2015
Ford
Mustang
GT 50 Years Limited Edition
2015-2025
Ford
Mustang
GT Premium
2025
Ford
Mustang
GTD
2021-2023
Ford
Mustang
Mach 1
2015-2020
Ford
Mustang
Shelby GT350
2015-2020
Ford
Mustang
Shelby GT350R
2020-2022
Ford
Mustang
Shelby GT500
2015-2017
Ford
Mustang
V6
Snow Performance Water Tank Upgrade 2.5gal Braided SS Line w/Bracket/Solenoid/Hose/Fittings
$248.21
$342.70
Want to move your standard 3QT Snow Performance Water-Methanol Tank or custom tank to the trunk of any vehicle? The rear mount upgrade comes with everything to safely ensure your water-meth system can be moved to the trunk. Comes with 15' stainless steel braided line, high flow solenoid upgrade, required AN fittings.
SnowAN Wrench Single Ended Set (-3AN to -16AN)
$141.40
$195.23
SnowAN Wrench Single Ended Set (-3AN to -16AN)