HPS Black Silicone Post MAF Air Intake Hose Kit for Mazda 2009-2015 MX-5 Miata 2.0L NC2 NC3 replaces the OEM restrictive intake tube with HPS race proven high temp reinforced silicone hose. By keeping the well designed stock air box performing at high efficient level, HPS intake hose improves air flow and throttle response, deliver performance gains without the heat soak problem. No re-tuning is required. Stock sound tube is retained. HPS intake kit also includes 100% stainless steel clamps for easy installation. This product fits Mazda 2009-2015 MX-5 Miata 2.0L NC2 NC3. The intake hose can also be used to replace the rubber intake elbow in AEM or Mazdapseed brand cold air intake kit. Made of HPS Performance race proven high temperature reinforced silicone material. Replaces the stock OEM restrictive rubber intake hose, improve air flow and reduce heat soak while keeping the stock well designed air box perform at high efficient level Without any re-tuning, the HPS silicone post MAF air intake tube delivers consistent performance gains across the power band This silicone intake hose does not trigger check engine light; installation time is approximately 30 to 45 minutes Includes HPS industrial grade 100 percent stainless steel t-bolt clamps for easy installation. Attributes: GTIN: 00648044854540 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Nissan 03-06 350Z 3.5L V6 HPS Black Silicone Air Intake Hose Post MAF Tube replaces the stock OEM restrictive hose with high temp reinforced silicon material. Unlike other aftermarket air intake kits, HPS post MAF silicone hoses improve air flow and reduce heat soak while keeping the stock well designed air box perform at high efficient level. Without any re-tuning, the HPS silicone post MAF air intake Tube deliver dyno-proven performance gains of +5.9 Whp, +5.5 Ft/Lbs. This product fits Nissan 2003-2006 350Z 3.5L V6. Made of HPS Performance race proven high temperature reinforced silicone material. Replaces the stock OEM restrictive rubber Post MAF intake hose, improve air flow and reduce heat soak while keeping the stock well designed air box perform at high efficient level Without any re-tuning, the HPS silicone post MAF air intake tube delivers dyno-proven performance gains +5.9 Whp, +5.5 Ft/lbs This silicone intake hose does not trigger check engine light; installation time is approximately 45 minutes Includes HPS industrial grade 100 percent stainless steel t-bolt clamps for easy installation. Attributes: GTIN: 00648044864037 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

HPS Black Silicone Air Intake Hose Post MAF Tube replaces Toyota 16-20 Tacoma 3.5L V6 stock OEM restrictive hose with high temp reinforced silicon material. Unlike other aftermarket air intake kits, HPS post MAF silicone hoses improve air flow and reduce heat soak while keeping the stock well designed air box perform at high efficient level. Without any re-tuning, the HPS silicone post MAF air intake tube delivers dyno-proven performance gains of +11.4 Whp, +13.9 Ft/lbs.This product fits Toyota 2016-2020 Tacoma 3.5L V6 Made of HPS Performance race proven high temperature reinforced silicone material. Replaces the stock OEM restrictive rubber intake hose, improve air flow and reduce heat soak while keeping the stock well designed air box perform at high efficient level Without any re-tuning, the HPS silicone post MAF air intake tube delivers dyno-proven performance gains +11.4 Whp, +13.9 Ft/lbs This silicone intake hose does not trigger check engine light; installation time is approximately 45 minutes Includes HPS industrial grade 100 percent stainless steel t-bolt clamps for easy installation. Attributes: GTIN: 00648044864600 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

Toyota 86-92 Supra 7MGTE Turbo HPS Black Silicone Turbo Inlet Air Intake Hose replaces the stock OEM restrictive hose with high temp reinforced silicon material. HPS high temp 4-ply reinforced silicon intake hose improves air flow and reduces heat soak and it is the ideal solution for replacing the oem stock cracking hose. This product fits Toyota 1986-1992 Supra 7MGTE Turbo. Made of HPS Performance race proven high temperature reinforced silicone material. Replaces the stock OEM rubber accordian turbo inlet hose, improve air flow and reduce heat soak. Re-tuning is NOT required. Easy to install without modification. This silicone intake hose does not trigger check engine light; installation time is approximately 45 minutes Includes HPS industrial grade 100 percent stainless steel t-bolt clamps for easy installation. Attributes: GTIN: 00648044857183 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

BMW 01-06 E46 M3 Left Hand Drive HPS High Temp 3-ply Reinforced Silicone Radiator and Heater Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone Radiator and Heater Hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits BMW 2001-2006 E46 M3 Left Hand Drive . Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044848921 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 6 lb

Dodge 11-17 Challenger 3.6L V6 HPS High Temp 3-ply Reinforced Silicone Radiator and Heater Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone Radiator and Heater Hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Dodge 2011-2017 Challenger 3.6L V6 . Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044859309 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

This brand new HPS High Temp 3-ply Reinforced Black Silicone Radiator and Heater Hose Kit for Honda 08-12 Accord 2.4L 4Cyl Left Hand Drive is designed to replace stock OEM rubber coolant and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone hose kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. Includes 100% stainless steel liner worm gear clamps for easy installation, which would not cut through the silicone hoses. This product fits Honda 08-12 Accord 2.4L 4Cyl Left Hand Drive. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044848624 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

This brand new HPS High Temp 3-ply Reinforced Black Silicone Radiator and Heater Hose Kit for Honda 08-12 Accord 3.5L V6 Left Hand Drive is designed to replace stock OEM rubber coolant and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone hose kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. Includes 100% stainless steel liner worm gear clamps for easy installation, which would not cut through the silicone hoses. This product fits Honda Honda 08-12 Accord 3.5L V6 Left Hand Drive. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044848655 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

This brand new HPS High Temp 3-ply Reinforced Black Silicone Radiator and Heater Hose Kit for Honda 13-17 Accord 2.4L 4Cyl Left Hand Drive is designed to replace stock OEM rubber coolant and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone hose kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. Includes 100% stainless steel liner worm gear clamps for easy installation, which would not cut through the silicone hoses. This product fits Honda 13-17 Accord 2.4L 4Cyl Left Hand Drive. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044851723 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

Jeep 00-01 Wrangler TJ 4.0L Left Hand Drive HPS High Temp 3-ply Reinforced Silicone Radiator and Heater Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator and heater hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator and heater hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Jeep 2000-2001 Wrangler TJ 4.0L Left Hand Drive. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044862088 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 8 x 8 inches Weight: 5 lb

HPS black high temp 3-ply reinforced silicone radiator and heater hose kit (part number 57-1731-BLK) replaces 2002 Subaru Impreza 2.5L Non Turbo Left Hand Drive stock OEM rubber upper and lower radiator hoses and heater coolant hoses with premium grade high-heat resistance material which meets or exceeds OE specifications (Maximum temperature rating: 350F). Compared to the local auto parts store universal hoses, HPS silicone radiator and heater hose kit has all the correct bends and curves for a perfect fitment. HPS silicone coolant hose kit includes 100% stainless steel non-perforated embossed hose clamps for easy installation, which do not cut through the silicone hoses. HPS silicone hoses can prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber coolant hoses. Excellent for extreme ambient and radiant temperature conditions, HPS silicone hoses can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during daily driving or racing competition. HPS silicone hose kit is backed by HPS Performance Products limited lifetime warranty. Made with correct bends and curves for perfect fitment. Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber coolant radiator heater hoses. Race proven design with long lasting quality and engineered for extremely high temperature service (Max. 350F) and prolonged exposure to under-hood and coolant heat. Includes 100 percent stainless steel industrial grade embossed hose clamps which would not cut through the silicone hoses. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044880693 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

HPS black high temp 3-ply reinforced silicone radiator and heater hose kit (part number 57-1732-BLK) replaces 2003 Subaru Impreza 2.5L Non Turbo Left Hand Drive stock OEM rubber upper and lower radiator hoses and heater coolant hoses with premium grade high-heat resistance material which meets or exceeds OE specifications (Maximum temperature rating: 350F). Compared to the local auto parts store universal hoses, HPS silicone radiator and heater hose kit has all the correct bends and curves for a perfect fitment. HPS silicone coolant hose kit includes 100% stainless steel non-perforated embossed hose clamps for easy installation, which do not cut through the silicone hoses. HPS silicone hoses can prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber coolant hoses. Excellent for extreme ambient and radiant temperature conditions, HPS silicone hoses can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during daily driving or racing competition. HPS silicone hose kit is backed by HPS Performance Products limited lifetime warranty. Made with correct bends and curves for perfect fitment. Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber coolant radiator heater hoses. Race proven design with long lasting quality and engineered for extremely high temperature service (Max. 350F) and prolonged exposure to under-hood and coolant heat. Includes 100 percent stainless steel industrial grade embossed hose clamps which would not cut through the silicone hoses. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044880723 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

HPS black high temp 3-ply reinforced silicone radiator and heater hose kit (part number 57-1733-BLK) replaces 2004-2005 Subaru Impreza 2.5L Non Turbo Left Hand Drive stock OEM rubber upper and lower radiator hoses and heater coolant hoses with premium grade high-heat resistance material which meets or exceeds OE specifications (Maximum temperature rating: 350F). Compared to the local auto parts store universal hoses, HPS silicone radiator and heater hose kit has all the correct bends and curves for a perfect fitment. HPS silicone coolant hose kit includes 100% stainless steel non-perforated embossed hose clamps for easy installation, which do not cut through the silicone hoses. HPS silicone hoses can prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber coolant hoses. Excellent for extreme ambient and radiant temperature conditions, HPS silicone hoses can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during daily driving or racing competition. HPS silicone hose kit is backed by HPS Performance Products limited lifetime warranty. Made with correct bends and curves for perfect fitment. Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber coolant radiator heater hoses. Race proven design with long lasting quality and engineered for extremely high temperature service (Max. 350F) and prolonged exposure to under-hood and coolant heat. Includes 100 percent stainless steel industrial grade embossed hose clamps which would not cut through the silicone hoses. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044880754 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

HPS black high temp 3-ply reinforced silicone radiator and heater hose kit (part number 57-1734-BLK) replaces 2006-2007 Subaru Impreza 2.5L Non Turbo Left Hand Drive stock OEM rubber upper and lower radiator hoses and heater coolant hoses with premium grade high-heat resistance material which meets or exceeds OE specifications (Maximum temperature rating: 350F). Compared to the local auto parts store universal hoses, HPS silicone radiator and heater hose kit has all the correct bends and curves for a perfect fitment. HPS silicone coolant hose kit includes 100% stainless steel non-perforated embossed hose clamps for easy installation, which do not cut through the silicone hoses. HPS silicone hoses can prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber coolant hoses. Excellent for extreme ambient and radiant temperature conditions, HPS silicone hoses can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during daily driving or racing competition. HPS silicone hose kit is backed by HPS Performance Products limited lifetime warranty. Made with correct bends and curves for perfect fitment. Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM rubber coolant radiator heater hoses. Race proven design with long lasting quality and engineered for extremely high temperature service (Max. 350F) and prolonged exposure to under-hood and coolant heat. Includes 100 percent stainless steel industrial grade embossed hose clamps which would not cut through the silicone hoses. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044880785 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

Toyota 99-03 Tundra 4.7L V8 Left Hand Drive HPS High Temp 3-ply Reinforced Silicone Radiator and Heater Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone Radiator and Heater Hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Toyota 1999-2003 Tundra 4.7L V8 Left Hand Drive. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044856612 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 5 lb

Toyota 05-18 Tacoma 2.7L 4Cyl HPS High Temp 3-ply Reinforced Silicone Radiator and Heater Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone Radiator and Heater Hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Toyota 2005-2018 Tacoma 2.7L 4Cyl. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044859361 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 5 lb

Toyota 12-14 Tundra 5.7L V8 Left Hand Drive HPS High Temp 3-ply Reinforced Silicone Radiator and Heater Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone Radiator and Heater Hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Toyota 2012-2014 Tundra 5.7L V8 Left Hand Drive. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044857008 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 5 lb

Toyota 85-87 Corolla AE86 4A-GEU Left Hand Drive HPS High Temp 3-ply Reinforced Silicone Radiator and Heater Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone Radiator and Heater Hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Toyota 1985-1987 Corolla AE86 4A-GEU Left Hand Drive. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044857121 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

This brand new HPS High Temp 3-ply Reinforced Black Silicone Radiator and Heater Hose Kit for Ford 01-04 Mustang 3.8L 3.9L V6 is designed to replace stock OEM rubber coolant and heater hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator and Heater Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your vehicle cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone hose kit has all the correct bends and curves for a perfect fit replacement on your vehicle, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. Includes 100% stainless steel liner worm gear clamps for easy installation, which would not cut through the silicone hoses. This product fits Ford 01-04 Mustang 3.8L 3.9L V6. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044850047 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 8 x 8 inches Weight: 5 lb

Toyota 90-99 MR2 3SGTE Turbo HPS High Temp 3-ply Reinforced Silicone rear engine Hose Kit Black (4pcs set) is designed to replace stock OEM rubber hoses located in the rear engine which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon rear engine hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone rear engine hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Toyota 1990-1999 MR2 3SGTE Turbo. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber hoses located in the rear engine (4pcs) which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044857428 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

This brand new HPS High Temp Reinforced Black Silicone Radiator Hose Kit (4pcs complete set) for Yamaha 01-05 YFM660 Raptor is designed to replace stock OEM rubber radiator hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon Radiator Hose Kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Old cracked or split radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your YFM660 Raptor cooling system by replacing your old brittle hoses now before it's too late. Perfect for racing or daily driving application. HPS silicone Radiator Hose Kit has all the correct bends and curves for a perfect fit replacement on your YFM660 Raptor, compare to the universal hoses you can get from the local auto store, HPS hose Kit is much easier to work with. HPS Silicon coolant hose Kit is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence. Fits Yamaha 01-05 YFM660 Raptor Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044858906 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Mazda 04-11 RX8 HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit (3pcs Set) Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS Silicone Radiator Hose Kit (3pcs Set) has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Mazda 2004-2011 RX8. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044858937 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

Acura 02-06 RSX HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Acura 2002-2006 RSX. Made of HPS Performance race proven high temperature reinforced silicone material. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044848471 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Acura 04-08 TSX HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Acura 2004-2008 TSX. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044848532 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Acura 04-08 TL 3.2L V6 HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Acura 2004-2008 TL 3.2L V6. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044863252 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Acura 90-93 Integra B18 B20 HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Acura 1990-1993 Integra B18 B20. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044848716 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Audi 99-06 TT 225HP HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Audi 1999-2006 TT 225HP. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044848839 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

BMW 2000 E46 323Ci M52 2.5L HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits BMW 2000 E46 323Ci M52 2.5L. Made with correct bends and curves for perfect fitment. The hose kit includes 100% stainless steel non-perforated embossed hose clamps for easy installation, which do not cut through the silicone hoses. Premium grade high-heat resistance reinforced silicone hoses ensure the long lasting quality over the OEM rubber coolant hoses. Ideal for extremely high temperature service and prolonged exposure to under-hood and coolant heat. 100% Satisfaction Guarantee. HPS Performance will help you to troubleshoot all the technical issues and questions. Attributes: GTIN: 00648044879222 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

BMW 01-06 E46 M3 HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits BMW 2001-2006 E46 M3. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849133 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

BMW 92-99 E36 318 Series HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits BMW 1992-1999 E36 318 Series. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849010 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

BMW 92-99 E36 325 / M3 HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits BMW 1992-1999 E36 325 / M3. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044890364 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Chevy 05-07 Cobalt SS 2.0L Supercharged HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Chevy 2005-2007 Cobalt SS 2.0L Supercharged. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849164 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Chevy 08-10 Cobalt SS 2.0L Turbo HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Chevy 2008-2010 Cobalt SS 2.0L Turbo. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849225 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Chevy 10-11 Camaro SS 6.2L V8 HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Chevy 2010-2011 Camaro SS 6.2L V8. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849287 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

Dodge 03-05 Neon SRT-4 HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Dodge 2003-2005 Neon SRT-4 2.4L Turbo. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849553 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Dodge 03-10 Ram 2500 3500 Pickup 5.9L / 6.7L Diesel Cummins HPS High Temp 3-ply Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Dodge 2003-2010 Ram 2500 3500 Pickup 5.9L / 6.7L Diesel Cummins. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044849614 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 8 x 8 inches Weight: 6 lb