Search results for "hps":

HPS 1-1/4" (32mm), 6" Long High Temp 4-ply Aramid Reinforced Orange Silicone Hump Coupler Hose meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications; Compensates for misalignment and offsets vibration. HPS performance silicone Hump Coupler Hose is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Technical Specification: Product Type: Silicone Hump Coupler Hose. Temperature Range:- 65 deg. F to + 500 deg. F (260 deg. C). Reinforced Layer: 4-ply Aramid. Hose Inside Diameter: 1.25" (32mm). Hose Outside Diameter: 1.66" (42mm). Hose Length: 6". Wall Thickness: 4.5mm (+/- 0.5mm). Color: Orange. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Aramid Reinforced Silicone Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system Compensates for misalignment and offsets vibration. UV and ozone resistant Silicone hose is NOT compatible with fuel or oil; However, it is compatible with water and anti-freeze such as coolant Attributes: GTIN: 00648044862989 Brand Name: HPS Performance Inside Diameter: 32 Length: 6" Max PSI: 80 psi Max Temp: 500F Outside Diameter: 42 Reinforced Layer: 4-ply Aramid Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 4 x 4 inches Weight: 0.39 lb

Jeep 07-11 Wrangler JK & Unlimted 3.8L V6 Left Hand Drive HPS High Temp 3-ply Reinforced Silicone Radiator and Heater Hose Kit Red is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator and heater hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator and heater hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Jeep 2007-2011 Wrangler JK & Unlimted 3.8L V6 Left Hand Drive. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044852607 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 8 x 8 inches Weight: 5 lb

HPS 1-1/4" (32mm), 4" Long High Temp 4-ply Aramid Reinforced Orange Silicone Hump Coupler Hose meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications; Compensates for misalignment and offsets vibration. HPS performance silicone Hump Coupler Hose is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Technical Specification: Product Type: Silicone Hump Coupler Hose. Temperature Range:- 65 deg. F to + 500 deg. F (260 deg. C). Reinforced Layer: 4-ply Aramid. Hose Inside Diameter: 1.25" (32mm). Hose Outside Diameter: 1.25" (32mm). Hose Length: 4". Wall Thickness: 4.5mm (+/- 0.5mm). Color: Orange. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Aramid Reinforced Silicone Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system Compensates for misalignment and offsets vibration. UV and ozone resistant Silicone hose is NOT compatible with fuel or oil; However, it is compatible with water and anti-freeze such as coolant Attributes: GTIN: 00648044862774 Brand Name: HPS Performance Inside Diameter: 32 Length: 4" Max PSI: 90 psi Max Temp: 500F Outside Diameter: 32 Reinforced Layer: 4-ply Aramid Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 4 x 4 x 4 inches Weight: 0.27 lb

HPS 5.5" (140mm) High Temp 4-ply Reinforced Silicone 90 Degree Elbow Coupler Hose meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. HPS performance silicone 90 Degree Elbow Coupler Hose is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Technical Specification: Product Type: Silicone 90 Degree Elbow Coupler Hose. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 4-ply. Hose Inside Diameter: 5.5" (140mm). Hose Outside Diameter: 5.91" (150mm). Leg Length on each side: 1-7/8". Wall Thickness: 4.5mm (+/- 0.5mm). Color: Blue. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Reinforced Silicone Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044830216 Brand Name: HPS Performance Inside Diameter: 140 Length: 1-7/8" Max PSI: 20 psi Max Temp: 350F Outside Diameter: 150 Reinforced Layer: 4-ply Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 10 x 10 x 10 inches Weight: 2 lb

HPS 5.5" (140mm) High Temp 4-ply Reinforced Silicone 90 Degree Elbow Coupler Hose meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. HPS performance silicone 90 Degree Elbow Coupler Hose is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Technical Specification: Product Type: Silicone 90 Degree Elbow Coupler Hose. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 4-ply. Hose Inside Diameter: 5.5" (140mm). Hose Outside Diameter: 5.91" (150mm). Leg Length on each side: 1-7/8". Wall Thickness: 4.5mm (+/- 0.5mm). Color: Black. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Reinforced Silicone Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044830209 Brand Name: HPS Performance Inside Diameter: 140 Length: 1-7/8" Max PSI: 20 psi Max Temp: 350F Outside Diameter: 150 Reinforced Layer: 4-ply Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 10 x 10 x 10 inches Weight: 2 lb

The All-New HPS Performance 827 Series Air Intake Kit (Black, Part # 827-676WB) for 2012-2015 Audi A7 Quattro 3.0L Supercharged (C7) offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890579 Brand Name: HPS Performance Add-On HPS Filter: HPS-4300 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

HPS 7/8" (22mm), 6" Long High Temp 4-ply Aramid Reinforced Orange Silicone Hump Coupler Hose meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications; Compensates for misalignment and offsets vibration. HPS performance silicone Hump Coupler Hose is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Technical Specification: Product Type: Silicone Hump Coupler Hose. Temperature Range:- 65 deg. F to + 500 deg. F (260 deg. C). Reinforced Layer: 4-ply Aramid. Hose Inside Diameter: 7/8" (22mm). Hose Outside Diameter: 1.25" (32mm). Hose Length: 6". Wall Thickness: 4.5mm (+/- 0.5mm). Color: Orange. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Aramid Reinforced Silicone Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system Compensates for misalignment and offsets vibration. UV and ozone resistant Silicone hose is NOT compatible with fuel or oil; However, it is compatible with water and anti-freeze such as coolant Attributes: GTIN: 00648044862965 Brand Name: HPS Performance Inside Diameter: 22 Length: 6" Max PSI: 100 psi Max Temp: 500F Outside Diameter: 32 Reinforced Layer: 4-ply Aramid Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 4 x 4 inches Weight: 0.32 lb

The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-676R) for 2012-2015 Audi A7 Quattro 3.0L Supercharged (C7) offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890562 Brand Name: HPS Performance Add-On HPS Filter: HPS-4300 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

HPS 7/8" - 1-1/2" (22mm - 38mm) High Temp 4-ply Reinforced Silicone 90 Degree Elbow Reducer Coupler Hose meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. HPS performance silicone 90 Degree Elbow Reducer Coupler Hose is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Technical Specification: Product Type: Silicone 90 Degree Elbow Reducer Coupler Hose. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 4-ply. Hose Inside Diameter: 7/8" - 1-1/2" (22mm - 38mm). Hose Outside Diameter: 1.25" - 1.89" (32mm - 48mm). Leg Length on each side: 4". Wall Thickness: 4.5mm (+/- 0.5mm). Color: Blue. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Reinforced Silicone Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044831558 Brand Name: HPS Performance Inside Diameter: 22 - 38 Length: 4" Max PSI: 100 psi Max Temp: 350F Outside Diameter: 32 - 48 Reinforced Layer: 4-ply Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

HPS 7/8" (22mm), 4" Long High Temp 4-ply Aramid Reinforced Orange Silicone Hump Coupler Hose meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications; Compensates for misalignment and offsets vibration. HPS performance silicone Hump Coupler Hose is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Technical Specification: Product Type: Silicone Hump Coupler Hose. Temperature Range:- 65 deg. F to + 500 deg. F (260 deg. C). Reinforced Layer: 4-ply Aramid. Hose Inside Diameter: 7/8" (22mm). Hose Outside Diameter: 1.25" (32mm). Hose Length: 4". Wall Thickness: 4.5mm (+/- 0.5mm). Color: Orange. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Aramid Reinforced Silicone Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system Compensates for misalignment and offsets vibration. UV and ozone resistant Silicone hose is NOT compatible with fuel or oil; However, it is compatible with water and anti-freeze such as coolant Attributes: GTIN: 00648044862750 Brand Name: HPS Performance Inside Diameter: 22 Length: 4" Max PSI: 100 psi Max Temp: 500F Outside Diameter: 32 Reinforced Layer: 4-ply Aramid Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 4 x 4 x 4 inches Weight: 0.22 lb

The All-New HPS Performance 827 Series Air Intake Kit (Polish, Part # 827-676P) for 2012-2015 Audi A7 Quattro 3.0L Supercharged (C7) offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890555 Brand Name: HPS Performance Add-On HPS Filter: HPS-4300 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

Jeep 07-11 Wrangler JK & Unlimted 3.8L V6 Left Hand Drive HPS High Temp 3-ply Reinforced Silicone Radiator and Heater Hose Kit Blue is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator and heater hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator and heater hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Jeep 2007-2011 Wrangler JK & Unlimted 3.8L V6 Left Hand Drive. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044852560 Brand Name: HPS Performance Color: Blue Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 8 x 8 inches Weight: 5 lb

HPS 7/8" - 1-1/2" (22mm - 38mm) High Temp 4-ply Reinforced Silicone 90 Degree Elbow Reducer Coupler Hose meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. HPS performance silicone 90 Degree Elbow Reducer Coupler Hose is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Technical Specification: Product Type: Silicone 90 Degree Elbow Reducer Coupler Hose. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 4-ply. Hose Inside Diameter: 7/8" - 1-1/2" (22mm - 38mm). Hose Outside Diameter: 1.25" - 1.89" (32mm - 48mm). Leg Length on each side: 4". Wall Thickness: 4.5mm (+/- 0.5mm). Color: Black. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Reinforced Silicone Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044831541 Brand Name: HPS Performance Inside Diameter: 22 - 38 Length: 4" Max PSI: 100 psi Max Temp: 350F Outside Diameter: 32 - 48 Reinforced Layer: 4-ply Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

HPS 4-1/2" (114mm) High Temp 4-ply Reinforced Silicone 90 Degree Elbow Coupler Hose meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. HPS performance silicone 90 Degree Elbow Coupler Hose is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Technical Specification: Product Type: Silicone 90 Degree Elbow Coupler Hose. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 4-ply. Hose Inside Diameter: 4.5" (114mm). Hose Outside Diameter: 4.89" (124mm). Leg Length on each side: 4". Wall Thickness: 4.5mm (+/- 0.5mm). Color: Blue. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Reinforced Silicone Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044830179 Brand Name: HPS Performance Inside Diameter: 114 Length: 4" Max PSI: 20 psi Max Temp: 350F Outside Diameter: 124 Reinforced Layer: 4-ply Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 10 x 10 x 10 inches Weight: 3 lb

HPS 3/4" (19mm), 6" Long High Temp 4-ply Aramid Reinforced Orange Silicone Hump Coupler Hose meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications; Compensates for misalignment and offsets vibration. HPS performance silicone Hump Coupler Hose is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Technical Specification: Product Type: Silicone Hump Coupler Hose. Temperature Range:- 65 deg. F to + 500 deg. F (260 deg. C). Reinforced Layer: 4-ply Aramid. Hose Inside Diameter: 3/4" (19mm). Hose Outside Diameter: 1.15" (29mm). Hose Length: 6". Wall Thickness: 4.5mm (+/- 0.5mm). Color: Orange. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Aramid Reinforced Silicone Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system Compensates for misalignment and offsets vibration. UV and ozone resistant Silicone hose is NOT compatible with fuel or oil; However, it is compatible with water and anti-freeze such as coolant Attributes: GTIN: 00648044862958 Brand Name: HPS Performance Outside Diameter: 29 Reinforced Layer: 4-ply Aramid Wall Thickness: 5mm Inside Diameter: 19 Length: 6" Max PSI: 100 psi Max Temp: 500F Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 4 x 4 inches Weight: 0.32 lb

The All-New HPS Performance 827 Series Air Intake Kit (Blue, Part # 827-676BL) for 2012-2015 Audi A7 Quattro 3.0L Supercharged (C7) offers a free-flowing 4 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response while maintaining safe air fuel ratio. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. The kit does NOT require tuning and does not trigger CEL light. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. All HPS Performance Air Filter are made in the United States. Fine-tuned by HPS Performance to produce dyno proven performance gains - increase horsepower +13 whp , torque +13 ft/lbs and improve throttle response. Does NOT require tuning after the install. Light weight 4 inch mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. Features HPS Performance race proven reinforced silicone hoses, industrial grade 100% stainless steel T-bolt clamps and Washable/Reusable Performance Air Filter. Heavy duty powder coated steel heat shield integrates with fresh air scoop forces cool air for the best cooling effect. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation, no modification. Attributes: GTIN: 00648044890548 Brand Name: HPS Performance Add-On HPS Filter: HPS-4300 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 12 x 10 inches Weight: 9 lb

Jeep 07-11 Wrangler JK & Unlimted 3.8L V6 Left Hand Drive HPS High Temp 3-ply Reinforced Silicone Radiator and Heater Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator and heater hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator and heater hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Jeep 2007-2011 Wrangler JK & Unlimted 3.8L V6 Left Hand Drive. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator and Heater Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044852553 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 24 x 8 x 8 inches Weight: 5 lb

HPS 7/8" - 1-3/8" (22mm - 35mm) High Temp 4-ply Reinforced Silicone 90 Degree Elbow Reducer Coupler Hose meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. HPS performance silicone 90 Degree Elbow Reducer Coupler Hose is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Technical Specification: Product Type: Silicone 90 Degree Elbow Reducer Coupler Hose. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 4-ply. Hose Inside Diameter: 7/8" - 1.38" (22mm - 35mm). Hose Outside Diameter: 1.25" - 1.75" (32mm - 45mm). Leg Length on each side: 4". Wall Thickness: 4.5mm (+/- 0.5mm). Color: Blue. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Reinforced Silicone Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044831534 Brand Name: HPS Performance Inside Diameter: 22 - 35 Length: 4" Max PSI: 100 psi Max Temp: 350F Outside Diameter: 32 - 45 Reinforced Layer: 4-ply Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 6 inches Weight: 1 lb

HPS 4-1/2" (114mm) High Temp 4-ply Reinforced Silicone 90 Degree Elbow Coupler Hose meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. HPS performance silicone 90 Degree Elbow Coupler Hose is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Technical Specification: Product Type: Silicone 90 Degree Elbow Coupler Hose. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 4-ply. Hose Inside Diameter: 4.5" (114mm). Hose Outside Diameter: 4.89" (124mm). Leg Length on each side: 4". Wall Thickness: 4.5mm (+/- 0.5mm). Color: Black. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Reinforced Silicone Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system UV and ozone resistant Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044830162 Brand Name: HPS Performance Inside Diameter: 114 Length: 4" Max PSI: 20 psi Max Temp: 350F Outside Diameter: 124 Reinforced Layer: 4-ply Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 10 x 10 x 10 inches Weight: 2 lb

HPS 3/4" (19mm), 4" Long High Temp 4-ply Aramid Reinforced Orange Silicone Hump Coupler Hose meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications; Compensates for misalignment and offsets vibration. HPS performance silicone Hump Coupler Hose is designed and engineerd to meet high performance requirements specified in various industry standards, therefore make it great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Technical Specification: Product Type: Silicone Hump Coupler Hose. Temperature Range:- 65 deg. F to + 500 deg. F (260 deg. C). Reinforced Layer: 4-ply Aramid. Hose Inside Diameter: 3/4" (19mm). Hose Outside Diameter: 1.15" (29mm). Hose Length: 4". Wall Thickness: 4.5mm (+/- 0.5mm). Color: Orange. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Made of High Temperature 4-ply Aramid Reinforced Silicone Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system Compensates for misalignment and offsets vibration. UV and ozone resistant Silicone hose is NOT compatible with fuel or oil; However, it is compatible with water and anti-freeze such as coolant Attributes: GTIN: 00648044862743 Brand Name: HPS Performance Inside Diameter: 19 Length: 4" Max PSI: 100 psi Max Temp: 500F Outside Diameter: 29 Reinforced Layer: 4-ply Aramid Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 4 x 4 x 4 inches Weight: 0.22 lb