Search results for "hps":

Built for performance and show, the HPS Red cold air intake kit for 2006-2011 Honda Civic Si 2.0L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. HPS silicone coolant re-route hose is included to prevent the intake pipe rubbing the stock coolant hose. The kit also includes air straightener to minimize the chance of CEL lights and the kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2006-2011 Honda Civic Si 2.0L. Fine-tuned by HPS to deliver dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Includes HPS silicone coolant re-route hose and air straightener. Attributes: GTIN: 00648044885414 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

Built for performance and show, the HPS Polish cold air intake kit for 2006-2011 Honda Civic Si 2.0L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. HPS silicone coolant re-route hose is included to prevent the intake pipe rubbing the stock coolant hose. The kit also includes air straightener to minimize the chance of CEL lights and the kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2006-2011 Honda Civic Si 2.0L. Fine-tuned by HPS to deliver dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Includes HPS silicone coolant re-route hose and air straightener. Attributes: GTIN: 00648044885421 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

Built for performance and show, the HPS Blue cold air intake kit for 2006-2011 Honda Civic Si 2.0L relocates HPS Performance Air Filter outside of the engine compartment to deliver the coolest air inlet temperatures. Compare to the tradiational shortram air intake, HPS long ram cool air intake delivers cooler air with more oxygen, which translates into a more intense explosion in the vehicle combustion chamber to produce dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. HPS silicone coolant re-route hose is included to prevent the intake pipe rubbing the stock coolant hose. The kit also includes air straightener to minimize the chance of CEL lights and the kit does NOT require tuning and no modification is required, however, removal of front bumper is necessary during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. HPS cold air induction system features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. The All-New HPS Performance Air Filters are made in the United State and are designed with performance in mind, delivering excellent filtration without sacrificing air flow. Washable and reusable. NOT CARB Complaint. Vehicle Application: 2006-2011 Honda Civic Si 2.0L. Fine-tuned by HPS to deliver dyno proven performance gains +8.9 Whp horsepower, +7.1 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install. Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive air box and optimize the air flow. Features HPS signature race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps. HPS Performance high flow air filter is washable and reusable. The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Includes HPS silicone coolant re-route hose and air straightener. Attributes: GTIN: 00648044885438 Brand Name: HPS Performance Add-On HPS Filter: HPS-4275 Extended Information: Country of Origin: China Emissions : Electronically Announced Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 12 x 12 x 12 inches Weight: 7 lb

HPS 2-3/8" (60mm) , 1" (25mm) ID branch, 6" (152mm) Long High Temp 4-ply Reinforced Blue Silicone Coupler T Hose Adapter meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. The tee design is great for custom DIY fabrication project such as adding heater coolant line or blow off valve to intake or radiator cooling system. Technical Specification: Product Type: Silicone Coupler T Hose Adapter. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 4-ply. Hose Inside Diameter: 2.38" (60mm). Hose Outside Diameter: 2 3/4" (70mm). Branch Size: 1" (25mm) ID with 1-1/8" Length. Hose Overall Length: 6". Overall Heigth (H): 4.26" (108mm). Wall Thickness: 4.5mm (+/- 0.5mm). Color: Blue. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Hose Size: 2-3/8" (60mm) with 6" overall length. Branch Size: 1" ID with 1-1/8" Length Made of High Temp 4-ply Reinforced Silicone, UV and ozone resistant Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044863993 Brand Name: HPS Performance Inside Diameter: 60 Length: 6" Max PSI: 100 psi Max Temp: 350F Outside Diameter: 70 Reinforced Layer: 4-ply Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 4 inches Weight: 1.1 lb

HPS 2-3/8" (60mm) , 1" (25mm) ID branch, 6" (152mm) Long High Temp 4-ply Reinforced Black Silicone Coupler T Hose Adapter meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. The tee design is great for custom DIY fabrication project such as adding heater coolant line or blow off valve to intake or radiator cooling system. Technical Specification: Product Type: Silicone Coupler T Hose Adapter. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 4-ply. Hose Inside Diameter: 2.38" (60mm). Hose Outside Diameter: 2 3/4" (70mm). Branch Size: 1" (25mm) ID with 1-1/8" Length. Hose Overall Length: 6". Overall Heigth (H): 4.26" (108mm). Wall Thickness: 4.5mm (+/- 0.5mm). Color: Black. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Hose Size: 2-3/8" (60mm) with 6" overall length. Branch Size: 1" ID with 1-1/8" Length Made of High Temp 4-ply Reinforced Silicone, UV and ozone resistant Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044863870 Brand Name: HPS Performance Inside Diameter: 60 Length: 6" Max PSI: 100 psi Max Temp: 350F Outside Diameter: 70 Reinforced Layer: 4-ply Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 4 inches Weight: 1.1 lb

HPS 2-1/8" (54mm) , 1" (25mm) ID branch, 6" (152mm) Long High Temp 4-ply Reinforced Blue Silicone Coupler T Hose Adapter meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. The tee design is great for custom DIY fabrication project such as adding heater coolant line or blow off valve to intake or radiator cooling system. Technical Specification: Product Type: Silicone Coupler T Hose Adapter. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 4-ply. Hose Inside Diameter: 2.12" (54mm). Hose Outside Diameter: 2.52" (64mm). Branch Size: 1" (25mm) ID with 1-1/8" Length. Hose Overall Length: 6". Overall Heigth (H): 4.02" (102mm). Wall Thickness: 4.5mm (+/- 0.5mm). Color: Blue. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Hose Size: 2-1/8" (54mm) with 6" overall length. Branch Size: 1" ID with 1-1/8" Length Made of High Temp 4-ply Reinforced Silicone, UV and ozone resistant Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044863979 Brand Name: HPS Performance Inside Diameter: 54 Length: 6" Max PSI: 100 psi Max Temp: 350F Outside Diameter: 64 Reinforced Layer: 4-ply Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 4 inches Weight: 1 lb

HPS 2-1/8" (54mm) , 1" (25mm) ID branch, 6" (152mm) Long High Temp 4-ply Reinforced Black Silicone Coupler T Hose Adapter meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. The tee design is great for custom DIY fabrication project such as adding heater coolant line or blow off valve to intake or radiator cooling system. Technical Specification: Product Type: Silicone Coupler T Hose Adapter. Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C). Reinforced Layer: 4-ply. Hose Inside Diameter: 2.12" (54mm). Hose Outside Diameter: 2.52" (64mm). Branch Size: 1" (25mm) ID with 1-1/8" Length. Hose Overall Length: 6". Overall Heigth (H): 4.02" (102mm). Wall Thickness: 4.5mm (+/- 0.5mm). Color: Black. UV and ozone resistant. Remark: Silicone hose is NOT compatible with fuel or oil. Hose Size: 2-1/8" (54mm) with 6" overall length. Branch Size: 1" ID with 1-1/8" Length Made of High Temp 4-ply Reinforced Silicone, UV and ozone resistant Meet and exceed SAEJ20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system Silicone hose is NOT compatible with fuel or oil Attributes: GTIN: 00648044863856 Brand Name: HPS Performance Inside Diameter: 54 Length: 6" Max PSI: 100 psi Max Temp: 350F Outside Diameter: 64 Reinforced Layer: 4-ply Wall Thickness: 5mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 6 x 6 x 4 inches Weight: 1 lb

Mazda 2006 Mazdaspeed 6 2.3L Turbo HPS High Temp 4-ply Reinforced Silicone Intercooler Turbo Hoses Kit Red is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon intercooler turbo hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone intercooler hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber intercooler hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel T-Bolt Clamps are included for easy installation. This product fits Mazda 2006 Mazdaspeed 6 2.3L Turbo. OEM fitment has all the correct bends and curves for a perfect fit replacement on your CX7 with stock intercooler and turbo setup. No cutting or trimming is required. Made with correct bends and curves for perfect fitment. Material: 4-Ply Reinforced Polyester with High Temp Silicone. Max. Temp Rating: 350 deg. F (177 deg. C) HPS 100% Stainless Steel T-Bolt Clamps are included for easy installation Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition Attributes: GTIN: 00648044854533 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Mazda 2006 Mazdaspeed 6 2.3L Turbo HPS High Temp 4-ply Reinforced Silicone Intercooler Turbo Hoses Kit Blue is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon intercooler turbo hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone intercooler hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber intercooler hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel T-Bolt Clamps are included for easy installation. This product fits Mazda 2006 Mazdaspeed 6 2.3L Turbo. OEM fitment has all the correct bends and curves for a perfect fit replacement on your CX7 with stock intercooler and turbo setup. No cutting or trimming is required. Made with correct bends and curves for perfect fitment. Material: 4-Ply Reinforced Polyester with High Temp Silicone. Max. Temp Rating: 350 deg. F (177 deg. C) HPS 100% Stainless Steel T-Bolt Clamps are included for easy installation Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition Attributes: GTIN: 00648044854526 Brand Name: HPS Performance Color: Blue Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Mazda 2006 Mazdaspeed 6 2.3L Turbo HPS High Temp 4-ply Reinforced Silicone Intercooler Turbo Hoses Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon intercooler turbo hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone intercooler hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber intercooler hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel T-Bolt Clamps are included for easy installation. This product fits Mazda 2006 Mazdaspeed 6 2.3L Turbo. OEM fitment has all the correct bends and curves for a perfect fit replacement on your CX7 with stock intercooler and turbo setup. No cutting or trimming is required. Made with correct bends and curves for perfect fitment. Material: 4-Ply Reinforced Polyester with High Temp Silicone. Max. Temp Rating: 350 deg. F (177 deg. C) HPS 100% Stainless Steel T-Bolt Clamps are included for easy installation Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition Attributes: GTIN: 00648044854519 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

The HPS Performance 7/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 7/8 inch inside diameter (22mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels.Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 41 psi. Hose Inside Diameter: 7/8" (22mm). Hose Outside Diameter: 1-3/16" (30mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 5-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 41psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891187 Brand Name: HPS Performance Inside Diameter: 22 Length: 9 Feet Max Temp: 350F Outside Diameter: 30 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

The HPS Performance 7/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 7/8 inch inside diameter (22mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels.Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 41 psi. Hose Inside Diameter: 7/8" (22mm). Hose Outside Diameter: 1-3/16" (30mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 5-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 41psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891101 Brand Name: HPS Performance Inside Diameter: 22 Length: 9 Feet Max Temp: 350F Outside Diameter: 30 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 4 lb

The HPS Performance 3/4" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 3/4 inch (19mm) inside diameter can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 47 psi. Hose Inside Diameter: 3/4" (19mm). Hose Outside Diameter: 1.06" (27mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 3-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 47psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891194 Brand Name: HPS Performance Wall Thickness: 4mm Inside Diameter: 19 Length: 9 Feet Max Temp: 350F Outside Diameter: 27 Reinforced Layer: 1-ply Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

The HPS Performance 3/4" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 3/4 inch (19mm) inside diameter can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 47 psi. Hose Inside Diameter: 3/4" (19mm). Hose Outside Diameter: 1.06" (27mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 3-1/2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 47psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891118 Brand Name: HPS Performance Inside Diameter: 19 Length: 9 Feet Max Temp: 350F Outside Diameter: 27 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Kawasaki 10-12 KX450F HPS High Temp Reinforced Silicone Radiator Hose Kit Red is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Kawasaki 2010-2012 KX450F. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044853376 Brand Name: HPS Performance Color: Red Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 2 lb

The HPS Performance 5/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 5/8 inch inside diameter (16mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 53 psi. Hose Inside Diameter: 0.62" (16mm). Hose Outside Diameter: 0.94" (24mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 3-1/4". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 53psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891200 Brand Name: HPS Performance Inside Diameter: 16 Length: 9 Feet Max Temp: 350F Outside Diameter: 24 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

The HPS Performance 5/8" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with 5/8 inch inside diameter (16mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure: 53 psi. Hose Inside Diameter: 0.62" (16mm). Hose Outside Diameter: 0.94" (24mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 3-1/4". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 53psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891125 Brand Name: HPS Performance Inside Diameter: 16 Length: 9 Feet Max Temp: 350F Outside Diameter: 24 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Kawasaki 10-12 KX450F HPS High Temp Reinforced Silicone Radiator Hose Kit Blue is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Kawasaki 2010-2012 KX450F. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044853369 Brand Name: HPS Performance Color: Blue Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 2 lb

The HPS Performance 1/2" FKM lined silicone hose is a specially developed hose with a fluoroelastomer liner in our world class silicone hoses. HPS Performance FKM lined silicone hoses with half inch inside diameter (13mm) can provide superior resistance to the harshness of gasoline, diesel, and automotive oils. The FKM lined hose can be used where the fluid flowing through the hose would traditionally degrade silicone hoses. With the FKM liner, we can minimize permeation, evaporation, and degradation of our silicone hose. HPS Performance FKM lined hose has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals. FKM can handle the occasional flow of ethanol based fuels. Technical Specification: Temperature Range:. 65 deg. F to + 350 deg. F (177 deg. C). Maximum Working Pressure (use as fuel line): 55 psi. Maximum Working Pressure (non fuel line): 55 psi. Hose Inside Diameter: 0.50" (13mm). Hose Outside Diameter: 0.83" (21mm). Length: 9 Feet. Wall Thickness: 4mm +/. 0.2mm. Bend Radius: 2". Recommended uses with HPS Performance FKM lined silicone hoses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. REMARK: Do NOT use the hose as fuel line with working pressure over 34 psi. Do NOT use the hose to handle alcohol fuel continuously. Do NOT fully submerge the hose in fuel during use. Excellent resistance to High Temperatureeratures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics, and many organic solvents and chemicals Recommended uses: Fuel Return, Fuel Ventilation, Crankcase Ventilation, Turbo Oil Return, Power Steering Return, Automatic Transmission Oil Cooler. Do NOT use the hose as fuel line with working pressure over 55psi Do NOT use the hose to handle alcohol fuel continuously Do NOT fully submerge the hose in fuel during use. Attributes: GTIN: 00648044891217 Brand Name: HPS Performance Inside Diameter: 13 Length: 9 Feet Max Temp: 350F Outside Diameter: 21 Reinforced Layer: 1-ply Wall Thickness: 4mm Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 3 lb

Kawasaki 10-12 KX450F HPS High Temp Reinforced Silicone Radiator Hose Kit Black is designed to replace stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement for your OEM rubber coolant hoses, compare to the universal hoses you can get from the local auto store, HPS hose kit is much easier to work with. Max. Temperature Rating: 350 deg. F. 100% Stainless Steel Clamps are included for easy installation. This product fits Kawasaki 2010-2012 KX450F. Made with correct bends and curves for perfect fitment. Replace stock OEM rubber Radiator Hoses which can eventually weaken over time, leading to premature failure Withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving. Max Temperature Rating: 350 deg. F (177 deg. C) Ideal replacement or performance upgrade for the OEM rubber hoses. Race proven design ensure the long lasting quality over the stock rubber hoses Includes HPS 100 percent stainless steel industrial grade embossed hose clamps which will not cut through the hoses. Attributes: GTIN: 00648044853352 Brand Name: HPS Performance Color: Black Extended Information: Country of Origin: China Emissions : Released Life Cycle Status: Available To Order Packing Information: Quantity of Each: 1 Package UOM: EA Dimension: 16 x 10 x 6 inches Weight: 2 lb