ROUSH 2015-2019 Ford Mustang 4-Piece Performance Pedal Kit
$259.99
Your Mustang has a Manual transmission, you heal-toe like your last name was Andretti, why should boring, stock pedals be the platform for your fancy footwork ROUSH Performance Pedal Kits are made of high quality CNC machined billet aluminum with black grip-surface accents that will keep your feet from slipping.
Additional Attributes:
GTIN: 00844764005662
Install Time: 30 minutes
Product Category Type: Interior Acc: Pedals
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 9 x 7 x 5 inches
ROUSH 2018-2020 F-150 2.7L/3.5L V6 EcoBoost Cold Air Kit (Incl. Raptor)
$459.99
The ROUSH Performance Cold Air Intake for 2018-2021 F-150 2.7/3.5L Ecoboost V6 engines (including Raptor) brings staggering performance increases, achieved with an installation that takes under an hour, and does not require any calibration! F-150s will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which provides more efficient air intake than the stock airbox. Providing up to 25% less intake restriction than stock in forced induction applications, this cold air intake kit is the most highly-engineered kit of its kind on the market. Latent potential in power and fuel efficiency that would otherwise be restricted, as well as reduced pressure drop, are two important benefits of this system. Custom tuning is not a requirement, as this CAI system was engineered and tested specifically for this application. It was designed using OEM CAD data to guarantee optimized fitment, keeping heat out and encouraging maximum performance.
Additional Attributes:
GTIN: 00844764006737
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 18 x 18 x 18 inches
ROUSH 2018-2019 Ford Mustang 2.3L I4 EcoBoost Cold Air Kit
$459.99
ROUSH's newly-designed cold air intake for the 2018-2021 2.3L I-4 Ecoboost engine brings staggering performance increases that can be achieved with an installation that takes under an hour, with no calibration required! The ROUSH EcoBoost Cold Air Intake replaces the restrictive stock air intake, unlocking latent power and fuel efficiency. There's no need for calibration or a custom tune, as this CAI system was engineered, tested, and designed to work with the completely stock 2.3L I-4 engine! Paired with Ford's innovative EcoBoost engine, our ROUSH Cold Air Kit feeds cooler, denser air to the turbo, increasing overall power output, while also turning up the sound of your Mustang! Our kit provides more flow than the stock system at peak horsepower. Best of all, this system will not void your factory warranty!
Additional Attributes:
GTIN: 00844764006799
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 18 x 18 x 18 inches
ROUSH 2018-2020 Ford Mustang 5.0L V8 GT Cold Air Kit
$459.99
The all-new 2018-2021 Mustang 5.0L ROUSH V8 Cold Air Kit is more efficient air intake than the standard stock airbox. Cold air induction allows for latent potential in power and fuel efficiency that would otherwise be restricted, as well as providing reduced pressure drop. A custom tune is not required as this CAI system was engineered and tested specifically for this application, ensuring MAF signal performance matches factory settings. Included is an innovative airbox lid with see-through lens. Our dry filter is proven to retain its shape under high airflow, and is composed of an inner and outer layer of wire mesh for durability and reliable support of filtration media. The filter requires no oiling and is easily washable for re-use.
Additional Attributes:
GTIN: 00844764006782
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 18 x 18 x 18 inches
ROUSH 2015-2017 F-150 2.7L/3.5L EcoBoost Cold Air Kit (Incl. Raptor)
$459.99
Your F-150 will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which provides more efficient air intake than the stock air box. Providing up to 25% less intake restriction than stock in forced induction applications, this cold air intake kit ? the most highly-engineered kit of its kind on the market ? increases engine performance by over 28 RWHP and 27 ft-lbs RWTQ (tested on 2016 3.5L EcoBoost platform) with no PCM re-calibration required!The kit features increased inlet and air box sizing to allow for maximum airflow, and provides an additional induction noise and aggressive performance sound. It was designed using OEM CAD data to guarantee optimized fitment, keeping heat out and encouraging maximum performance. Our high-flow, high-capacity dry filter requires no oiling and is easily washable for re-use.
Additional Attributes:
GTIN: 00844764006058
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 18 x 18 x 18 inches
ROUSH 2015-2017 F-150 5.0L V8 Cold Air Kit
$459.99
Your 2015-2017 Ford F-150 5.0L V8 will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which provides more efficient air intake than the stock air box. Providing up to 31% less intake restriction than stock in forced induction applications, this cold air intake kit ? the most highly-engineered kit of its kind on the market ? increases engine performance by over 13.9 RWHP and 19.7 lb-ft RWTQ with no PCM re-calibration required!The kit features increased inlet and air box sizing to allow for maximum airflow, and provides an additional induction noise and aggressive performance sound.Our high-flow, high-capacity dry filter is proven to retain its shape. The filter requires no oiling and is easily washable for re-use. Included in the kit is the air filter with clamp, oversized injection-molded air box tray, a clean air tube, 105mm mass air flow tube, and all required mounting hardware and instructions.
Additional Attributes:
GTIN: 00844764006041
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 18 x 18 x 18 inches
ROUSH 2015-2017 Ford Mustang 3.7L Cold Air Kit
$459.99
The all-new 2015-2017 Mustang 3.7L ROUSH V6 Cold Air Kit is the perfect addition to any 2015 V6 Mustang. A more efficient air-intake than the stock air filter assembly, ROUSH's cold air kits unlock latent power potential and fuel efficiency that would otherwise be restricted. Custom calibration is not required and a noticeable increase of 10.5 hp and 9 lb-ft of torque is possible. This high flow system has 20% less intake restriction compared to the stock induction systemThe kit includes an dry filter that retains its shape during high airflow and is made up of an inner and outer layer of wire mesh that ensures durability and support of the filtration media. You don't' need to use messy oils to maintain this filter, just simply wash it and let it dry. The kit utilizes all factory emissions and vacuum lines. Factory mounting locations and hardware are utilized to allow for quick and easy installation.
Additional Attributes:
GTIN: 00844764004993
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 35 x 17 x 17 inches
ROUSH 2015-2017 Ford Mustang 2.3L Cold Air Kit
$459.99
ROUSH's newly-designed cold air intake for the 2015-2017 2.3L I4 Ecoboost engine brings staggering performance increases that can be achieved with an installation that takes under an hour with no calibration required!The ROUSH EcoBoost Cold Air Intake replaces the restrictive stock air intake, unlocking latent power. There's no need for a custom tune, as this CAI system was engineered and designed to work with the completely stock 2.3L I4 engine! Paired with Ford's innovative EcoBoost engine, our ROUSH Cold Air Kit feeds cooler, denser air to the Turbo, increasing potential power output by up to 29 RWHP and 27 ft-lbs. RTWQ! Our kit is 74% less restrictive than the stock system at peak horsepower. Best of all, this system will not void your factory warranty! The filter is washable, re-usable and requires no oiling.The kit utilizes all factory emissions and vacuum lines. Factory mounting locations and hardware are utilized to allow for quick and easy installation.
Additional Attributes:
GTIN: 00844764004986
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 35 x 17 x 17 inches
ROUSH 2015-2017 Ford Mustang 5.0L Cold Air Kit
$459.99
The all-new 2015-2017 Mustang 5.0L ROUSH V8 Cold Air Kit is more efficient air-intake than the standard stock air box. Cold air induction allows for latent potential in power and fuel efficiency that would otherwise be restricted, as well as providing reduced pressure drop. A custom tune is not required as this CAI system was engineered and tested specifically for this application ensuring MAF signal performance matches factory settings. As a straight bolt on, with no tune, it's possible to see gains of 10hp and 8 lb-ft of torque, a noticeable increase. The filter requires no oiling and is easily washable for re-use.Included in the kit is the air filter with clamp, injection-molded lower air box/tray with installed EPDM foam hood seal, Blow Molded clean air tubes and all required mounting hardware. The kit utilizes all factory emissions and vacuum lines. Factory mounting locations and hardware are utilized to allow for quick and easy installation.
Additional Attributes:
GTIN: 00844764004979
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 35 x 17 x 17 inches
ROUSH 2012-2014 Ford F-150 3.5L EcoBoost Cold Air Intake
$374.99
This F-150 Cold Air Intake fits the 2012-2014 F-150 3.5L-V6 EcoBoost Engine. Key features of the ROUSH 3.5L EcoBoost F-150 Cold Air Intake kit include: Easy installation in less than one hour and requires NO drilling or cutting, a washable reusable premium high flow air filter. Also included is an injection molded mass air pressure tube and air box lid for maximum air flow efficiency, designed and manufactured for superior structural durability.Please note that this kit is designed for the 2012-2014 model year 3.5L EcoBoost F-150's and will NOT work with the 2011 model year (different MAP sensors).
Additional Attributes:
GTIN: 00844764004856
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 14 x 14 x 14 inches
ROUSH 2010-2016 Ford Taurus SHO 3.5L Cold Air Kit
$349.99
Unleash latent power and fuel efficiency from your Taurus SHO 3.5L EcoBoost V6 engine with the ROUSH Cold Air Intake Kit. Cold air induction is a proven method for increasing power over non-thermally isolated air induction. This process works by keeping incoming air temperatures down, thus increasing the oxygen density and potential power. Another key component to cold air intake systems is the increase in induction air flow with less restrictive air filter media and optimized tubing shape and length.In addition to the 2010-2016 Ford Taurus SHO (with 3.5L EcoBoost V6), this system also works with the following additional 2010-2014 vehicles with the 3.5L EcoBoost V6 engine: Ford Flex, Lincoln MKS, and Lincoln MKT.
Additional Attributes:
GTIN: 00844764004054
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 21 x 14 x 13 inches
ROUSH 2011-2014 Ford Mustang 3.7L V6 Cold Air Kit
$429.99
Unleash the hidden power in your 2011-2014 3.7L V6 Mustang with this premium quality ROUSH Performance Cold Air Intake Kit!Cold air induction is a more efficient air intake method than the factory air filtering process. Consequently, unrealized power and fuel efficiency that would normally be restrained by the stock air intake unit is attained. ROUSH Performance cold air intakes feature three main improvements: upgraded air dam, high flow air filter media, and cold air induction tube.Included with this kit will be a new induction tube, complete airbox assembly, premium synthetic washable/reusable filter (pre-oiled), and all necessary hardware and instructions to install. This kit is also backed by the ROUSH 90 Day Limited Parts Only Warranty.
Additional Attributes:
GTIN: 00844764004047
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 20 x 14 x 12 inches
ROUSH 2011-2014 Ford F-150 6.2L Cold Air Kit
$429.99
ROUSH F-150 Cold Air Induction kit fits 2011-2014 F-150's with 6.2L-V8 engineThe 6.2L-V8 ROUSH Cold Air Induction kit features:Easy installation in less than one hour and requires NO drilling or cutting A washable, reusable premium high flow air filter An injection molded plastic clean air tube designed for maximum air flow efficiency Designed and manufactured for superior structural stability and durability Applications: 2011-2014 F-150 with 6.2L-V8 engine
Additional Attributes:
GTIN: 00844764004030
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 19 x 13 x 14 inches
ROUSH 2011-2014 Ford F-150 5.0L Cold Air Kit
$429.99
Looking to get more power out of your 2011-2014 5.0L V8 F-150 without spending a fortune ROUSH Performance has just the solution!Cold air induction is a much more efficient air intake method than the standard air filtering process that the stock engine utilizes. Due to the increase in air flow supplied by this kit, you will also experience better throttle response and overall engine performance.The ROUSH Cold Air Intake Kit will also give your F-150 better appearance under the hood, and will let people know you only use the best products on your truck. No calibration is required when installing this kit either, meaning you don't need to worry about spending additional money to get down the road.Included with this kit will be a new clean air tube, airbox, synthetic reusable/washable high-flow air filter (oiled), and all necessary hardware and instructions.
Additional Attributes:
GTIN: 00844764004023
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Emission verification to be determined in ACES, vehicle application data.
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 19 x 13 x 14 inches
ROUSH 2010-2014 Ford Mustang 4.6L/5.0L V8 Cold Air Intake Kit
$349.99
Designed for the 2011-2014 Mustang GT 5.0L V8, 2012-2013 Boss 302 5.0L V8, and 2010 Mustang GT 4.6L V8, this ROUSH Cold Air Intake Kit includes a high-flow air filter (oiled) with clamp, new MAF tube, airbox tray with installed EPDM foam hood seal, heat extractor foam insert (for 2013-2014 users), and all required mounting hardware.The benefits of this kit include reduced pressure drop and increased performance and efficiency. Both the tray and MAF tube are manufactured using OE-quality materials (30% glass-filled polypropylene) and tooling (fully CNC machined hardened steel plastic injection molds). These provide excellent dimensional capability, stability, and long term durability and performance. This kit uses factory mounting locations and hardware, for quick and easy installation, and maintains OE clearances to all nearby components and hardware. The kit will also include detailed instructions, and also carries the ROUSH 90 Day Limited Parts Warranty.
Additional Attributes:
GTIN: 00844764002807
Install Time: 1 hour
Product Category Type: Cold Air Kits
Extened Information:
Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 14 x 14 x 14 inches
Roush 2018-2021 F-150 5.0L V8 Cold Air Intake Kit (rsh422088 for CARB Legal Version)
$459.99
The newly-designed ROUSH Performance Cold Air Intake for the 2019-2021 5.0L V8 F-150 engine brings great performance increases, achieved with an installation that takes under an hour, with no calibration required! The 2018-2021 Ford F-150 5.0L V8 will benefit greatly from the addition of this ROUSH Cold Air Intake Kit, which provides more efficient air intake than the stock airbox. Providing much less intake restriction than stock in forced induction applications, this cold air intake kit ? the most highly-engineered kit of its kind on the market ? increases engine performance with no PCM re-calibration required! Latent potential in power that would otherwise be restricted, as well as reduced pressure drop, are two important benefits of this system. Custom tuning is not a requirement, as this CAI system was engineered and tested specifically for this application.
Additional Attributes:
GTIN: 00844734222679
Install Time: 1 hour
Extened Information:
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 18 x 18 x 18 inches