The K&N 63-1573 AirCharger air intake system replaces the restrictive factory air filter and air intake housing on specific Jeep Wrangler models. K&N air intakes are designed to dramatically reduce air intake restriction allowing your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The air intake includes a uniquely designed snorkel system that brings in outside air from an ideal location to allow you to ride your Jeep hard in extreme off-road conditions. Fresh air is directed through the low-restriction snorkel tubing and into a replacement K&N roto-molded air box that contains a K&N high-flow air filter. An aerodynamically engineered intake tube smoothes and straightens the air flow before it goes directly into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points. Additional Attributes: GTIN: 00024844363916 Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Corrugated Package Type: Box Product Style: 63 Series Aircharger Kits Replacement Filter: RF-1048 RPM: 5200 Street Legal In All US States: No TUV Approved (Europe): No Warranty: 1,000,000 Miles/10 Year Weight: 20.5 lb (9.3 kg) Air Box Included: Yes Air Filter Color: Red Air Filter Material: Cotton Gauze Air Filter Outlet Shape: Round Air Filter Washable: Yes California Restricted: Not legal for sale or use in California Clamp Color/Finish: Natural Clamp Material: Stainless Steel Clamp Style: Worm Gear Clamps Included: 11 Coupler Color/Finish: Black Couplers Included: 1 Estimated Horsepower Gain: 6.58 HP @ 5200 RPM Horse Power Increase: 7 HP Intake Pipe Color / Finish: Black Intake Pipe Material: High-Density Cross-Linked Polyethylene Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Extened Information: Life Cycle Status: Available To Order Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 36.1880 x 18.1250 x 10.2500 inches PDF: 63-1573_dyno 63-1573_inst

The Boost Control Module instructs the vehicle's ECU to increase the amount of pressure in the manifold to a higher level before releasing it through the wastegate, keeping more boost available for when you need it (up to an estimate 49 horsepower and 82 lb./ft. of torque). The module reads the MAP (manifold air pressure), preventing over-boost and ensuring that power is added safely. Everything you need to set up your Boost Control Module, including the control module, wiring harness, adjustable control dial, and complete instructions are included. Featuring easy plug & play installation, it can typically be installed and ready to use in 30 minutes or less! Additional Attributes: GTIN: 00024844372680 California Restricted: Not legal for sale or use in California Estimated Horsepower Gain: 49.6 HP @ 2850 RPM Horse Power Increase: 50 HP Package Material: Corrugated Package Type: Box Product Style: Boost Controller RPM: 2850 Street Legal In All US States: No Weight: 1.3 lb (0.6 kg) Extened Information: Life Cycle Status: Available To Order Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 9.6250 x 7.7500 x 3.1250 inches PDF: 21-1568_dyno 21-1568_inst

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle. Additional Attributes: GTIN: 00024844363664 Air Box Included: No Air Filter Color: Red Air Filter Material: Cotton Gauze Air Filter Outlet Shape: Round Air Filter Washable: Yes California Restricted: Not legal for sale or use in California Clamp Color/Finish: Natural Clamp Material: Stainless Steel Clamp Style: Worm Gear Clamps Included: 4 Coupler Color/Finish: Black Couplers Included: 1 Estimated Horsepower Gain: 19.67 HP @ 4980 RPM Horse Power Increase: 20 HP Intake Pipe Color / Finish: Black Intake Pipe Material: Aluminum Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Paperboard Package Type: Box Product Style: 69 Series Typhoon Kits Replacement Filter: RP-5168 RPM: 4980 Street Legal In All US States: No System Type: Complete Cold-Air Intake System TUV Approved (Europe): No Warranty: 1,000,000 Miles/10 Year Weight: 10 lb (4.5 kg) Extened Information: Life Cycle Status: Available To Order Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24.1000 x 15.5000 x 14.5000 inches PDF: 69-4533_dyno 69-4533_inst

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle. Additional Attributes: GTIN: 00024844346629 Air Box Included: No Air Filter Color: Red Air Filter Height: 3 in (76 mm) Air Filter Material: Cotton Gauze Air Filter Outlet Length: 0.625 in (16 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 3 in (76 mm) Air Filter Washable: Yes Clamp Color/Finish: Natural Clamp Material: Steel Clamp Style: Regular Clamps Included: 8 Coupler Color/Finish: Black Couplers Included: 5 Estimated Horsepower Gain: 13.86 HP @ 5273 RPM Horse Power Increase: 14 HP Intake Pipe Color / Finish: Textured Black Intake Pipe Inlet Length: 9 in (229 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 3.5 in (89 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 9 in (229 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 3.5 in (89 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Paperboard Package Type: Box Product Style: 69 Series Typhoon Kits Replacement Filter: RF-1048 RPM: 5273 Street Legal In All US States: See Vehicle Applications System Type: Cold-Air Intake System TUV Approved (Europe): No Warranty: 1,000,000 Miles/10 Year Weight: 21.4 lb (9.7 kg) Extened Information: Life Cycle Status: Available To Order Emissions : Emission verification to be determined in ACES, vehicle application data. Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24.2000 x 20.2000 x 15.6000 inches PDF: 69-2528_dyno 69-2528_Inst

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle. Additional Attributes: GTIN: 00024844260550 Air Box Included: No Air Filter Color: Red Air Filter Height: 6 in (152 mm) Air Filter Large End Diameter: 7.5 in (191 mm) Air Filter Material: Cotton Gauze Air Filter Outlet Length: 6 in (152 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 6 in (152 mm) Air Filter Washable: Yes CARB EO Number: D-269-38 Clamp Color/Finish: Natural Clamp Material: Stainless Steel Clamp Style: Regular Clamps Included: 9 Coupler Color/Finish: Black Couplers Included: 4 Estimated Horsepower Gain: 18.69 HP @ 5300 RPM Horse Power Increase: 19 HP Intake Pipe Color / Finish: Red Intake Pipe Inlet Length: 8.5 in (216 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 3.5 in (89 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 8.5 in (216 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 3.5 in (89 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Paperboard Package Type: Box Product Style: 69 Series Typhoon Kits Replacement Filter: RF-1048 RPM: 5300 Street Legal In All US States: Yes System Type: Cold-Air Intake System TUV Approved (Europe): No Warranty: 1,000,000 Miles/10 Year Weight: 17.4 lb (7.9 kg) Extened Information: Life Cycle Status: Available To Order Emissions : Emission verification to be determined in ACES, vehicle application data. Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 35.5000 x 13.2500 x 10.5000 inches PDF: 69-2527_dyno 69-2527_inst

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle. Additional Attributes: GTIN: 00024844192882 Air Box Included: No Air Filter Color: Red Air Filter Height: 5.5 in (140 mm) Air Filter Large End Diameter: 6.5 in (165 mm) Air Filter Material: Cotton Gauze Air Filter Outlet Length: 5 in (127 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 5 in (127 mm) Air Filter Washable: Yes California Restricted: Not legal for sale or use in California Clamp Color/Finish: Natural Clamp Material: Stainless Steel Clamp Style: Regular Clamps Included: 7 Coupler Color/Finish: Black Couplers Included: 3 Estimated Horsepower Gain: 20.77 HP @ 5700 RPM Horse Power Increase: 21 HP Intake Pipe Color / Finish: Flat Black Intake Pipe Inlet Length: 12 in (305 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 3.25 in (83 mm) Intake Pipe Material: Aluminum Intake Pipe Outlet Length: 12 in (305 mm) Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 3.25 in (83 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Paperboard Package Type: Box Product Style: 69 Series Typhoon Kits Replacement Filter: RU-5147 RPM: 5700 Street Legal In All US States: No System Type: Cold-Air Intake System TUV Approved (Europe): No Warranty: 1,000,000 Miles/10 Year Weight: 14 lb (6.4 kg) Extened Information: Life Cycle Status: Available To Order Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22.2500 x 14.2500 x 12.5000 inches PDF: 69-2003_dyno 69-2003_inst

The K&N AirCharger 63-3096 air intake system replaces the restrictive factory air filter and air intake housing in some Cadillac CTS-V models. This system allows the engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The K&N air filter is made from multi-layers of oiled cotton gauze which improves air flow and can be used up to 100,000 miles before cleaning is necessary (depending on driving conditions). The intake tube is made from carbon fiber to improve the look in the engine bay and to be lighter in weight than the factory system. It is also designed to accomodate the factory MAF sensor and crank case vent fitting. A heat shield is designed to keep out hot engine bay air, and also uses the existing factory mounts for installation. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. Additional Attributes: GTIN: 00024844365309 Air Box Included: No Air Filter Color: Red Air Filter Material: Cotton Gauze Air Filter Outlet Shape: Round Air Filter Washable: Yes California Restricted: Not legal for sale or use in California Clamp Color/Finish: Black Clamp Material: Steel Clamp Style: Worm Gear Clamps Included: 5 Coupler Color/Finish: Black Couplers Included: 2 Estimated Horsepower Gain: 50.19 HP @ 5824 RPM Horse Power Increase: 50 HP Intake Pipe Color / Finish: Black Intake Pipe Material: High-Density Cross-Linked Polyethylene Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Corrugated Package Type: Box Product Style: 63 Series Aircharger Kits Replacement Filter: RP-2960 RPM: 5824 Street Legal In All US States: No TUV Approved (Europe): No Warranty: 1,000,000 Miles/10 Year Weight: 9.2 lb (4.2 kg) Extened Information: Life Cycle Status: Available To Order Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22.2500 x 14.2500 x 12.5000 inches PDF: 63-3096_dyno 63-3096_inst

The K&N AirCharger 63-3099 air intake system replaces the restrictive factory air filter and air intake housing in some Chevrolet Camaro ZL1 models (see vehicle applications). K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your Camaro ZL1 engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-3099 air intake tube is made almost completely out of ultra-lightweight carbon fiber. Included is a K&N high-flow air filter and a heat shield that directs cooler air into the custom molded intake for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install using commonly available tools. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. Additional Attributes: GTIN: 00024844365316 Air Box Included: No Air Filter Color: Red Air Filter Material: Cotton Gauze Air Filter Outlet Shape: Round Air Filter Washable: Yes California Restricted: Not legal for sale or use in California Clamp Color/Finish: Black Clamp Material: Stainless Steel Clamp Style: Worm Gear Clamps Included: 5 Coupler Color/Finish: Black Couplers Included: 1 Estimated Horsepower Gain: 23.62 HP @ 5379 RPM Horse Power Increase: 24 HP Intake Pipe Color / Finish: None Intake Pipe Material: Carbon Fiber Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Corrugated Package Type: Box Product Style: 63 Series Aircharger Kits Replacement Filter: RP-5168 RPM: 5379 Street Legal In All US States: No TUV Approved (Europe): No Warranty: 1,000,000 Miles/10 Year Weight: 9.2 lb (4.2 kg) Extened Information: Life Cycle Status: Available To Order Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22.2500 x 14.2500 x 12.5000 inches PDF: 63-3099_dyno 63-3099_inst

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle. Additional Attributes: GTIN: 00024844362124 Air Box Included: No Air Filter Color: Red Air Filter Height: 7 in (178 mm) Air Filter Material: Cotton Gauze Air Filter Outlet Shape: Round Air Filter Washable: Yes California Restricted: Not legal for sale or use in California Clamp Color/Finish: Natural Clamp Material: Stainless Steel Clamp Style: Spring Clamps Included: 9 Coupler Color/Finish: Black Couplers Included: 2 Estimated Horsepower Gain: 50.71 HP @ 5340 RPM Horse Power Increase: 51 HP Intake Pipe Color / Finish: None Intake Pipe Material: Carbon Fiber Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Paperboard Package Type: Box Product Style: 63 Series Aircharger Kits Replacement Filter: RP-5285 RPM: 5340 Street Legal In All US States: No TUV Approved (Europe): No Warranty: 1,000,000 Miles/10 Year Weight: 10.9 lb (4.9 kg) Extened Information: Life Cycle Status: Available To Order Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 18.2500 x 18.2500 x 12.5000 inches PDF: 63-3090_dyno 63-3090_inst

The K&N AirCharger 63-3080 air intake system replaces the restrictive factory air filter and air intake housing in some Chevrolet Corvette ZR1 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your Corvette ZR1's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-3080 air intake is made almost completely out of light weight super-strong carbon fiber and comes with a K&N high-flow air filter that directs air into the custom molded intake for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a screwdriver and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. Additional Attributes: GTIN: 00024844322128 Air Box Included: No Air Filter Color: Red Air Filter Height: 4.625 in (117 mm) Air Filter Material: Cotton Gauze Air Filter Outlet Length: 2 in (51 mm) Air Filter Outlet Shape: Oval Air Filter Outlet Width: 8.75 in (222 mm) Air Filter Washable: Yes California Restricted: Not legal for sale or use in California Clamp Color/Finish: Black Clamp Material: Stainless Steel Clamp Style: Regular Clamps Included: 5 Coupler Color/Finish: Black Couplers Included: 2 Estimated Horsepower Gain: 27.15 HP @ 5948 RPM Horse Power Increase: 27 HP Intake Pipe Color / Finish: Black Intake Pipe Inlet Length: 14.75 in (375 mm) Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 3.2 in (81 mm) Intake Pipe Material: Carbon Fiber Intake Pipe Outlet Length: 14.75 in (375 mm) Intake Pipe Outlet Shape: Oval Intake Pipe Outlet Width: 8.75 in (222 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Paperboard Package Type: Box Product Style: 63 Series Aircharger Kits Replacement Filter: RP-5161 RPM: 5948 Street Legal In All US States: No TUV Approved (Europe): No Warranty: 1,000,000 Miles/10 Year Weight: 7.7 lb (3.5 kg) Extened Information: Life Cycle Status: Available To Order Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24.2000 x 20.2000 x 15.6000 inches PDF: 63-3080_dyno 63-3080_inst

The K&N AirCharger 63-3079 air intake system replaces the restrictive factory air filter and air intake housing in some Chevrolet Camaro ZL1 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your Camaro ZL1 engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-3079 air intake is made almost completely out of ultra-lightweight carbon fiber and comes with a K&N high-flow air filter and a heat shield that directs cooler air into the custom molded intake for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install using commonly available tools. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. Additional Attributes: GTIN: 00024844328076 Coupler Color/Finish: Black Couplers Included: 2 Estimated Horsepower Gain: 25.37 HP @ 4053 RPM Horse Power Increase: 25 HP Intake Pipe Color / Finish: Black Intake Pipe Inlet Shape: Round Intake Pipe Inlet Width: 4.438 in (113 mm) Intake Pipe Material: Carbon Fiber Intake Pipe Outlet Shape: Round Intake Pipe Outlet Width: 4 in (102 mm) Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Paperboard Package Type: Box Product Style: 63 Series Aircharger Kits Replacement Filter: RP-5168 RPM: 4053 Street Legal In All US States: No TUV Approved (Europe): No Warranty: 1,000,000 Miles/10 Year Weight: 8.8 lb (4 kg) Air Box Included: No Air Filter Color: Red Air Filter Height: 6 in (152 mm) Air Filter Material: Cotton Gauze Air Filter Outlet Length: 1 in (25 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 6 in (152 mm) Air Filter Washable: Yes California Restricted: Not legal for sale or use in California Clamp Color/Finish: Black Clamp Material: Stainless Steel Clamp Style: Regular Clamps Included: 5 Extened Information: Life Cycle Status: Available To Order Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22.2500 x 14.2500 x 12.5000 inches PDF: 63-3079_dyno 63-3079_inst

The K&N AirCharger 63-3052 air intake system replaces the restrictive factory air filter and air intake housing in some Chevrolet Corvette models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your Corvette's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-3052 air intake comes with a K&N carbon fiber top and flanged high-flow air filter that directs air into the custom molded intake for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a flat head screwdriver and a 10mm wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. Additional Attributes: GTIN: 00024844112699 Air Box Included: No Air Filter Color: Red Air Filter Height: 4.813 in (122 mm) Air Filter Material: Cotton Gauze Air Filter Outlet Length: 5.313 in (135 mm) Air Filter Outlet Shape: Oval Air Filter Outlet Width: 5.313 in (135 mm) Air Filter Washable: Yes California Restricted: Not legal for sale or use in California Clamp Color/Finish: Natural Clamp Material: Stainless Steel Clamp Style: Regular Clamps Included: 4 Coupler Color/Finish: Black Couplers Included: 2 Estimated Horsepower Gain: 10.05 HP @ 6000 RPM Horse Power Increase: 10 HP Intake Pipe Color / Finish: Black Intake Pipe Material: High-Density Cross-Linked Polyethylene Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Paperboard Package Type: Box Product Style: 63 Series Aircharger Kits Replacement Filter: RP-5135 RPM: 6000 Street Legal In All US States: No TUV Approved (Europe): No Warranty: 1,000,000 Miles/10 Year Weight: 8.3 lb (3.7 kg) Extened Information: Life Cycle Status: Available To Order Emissions : Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24.1000 x 15.5000 x 14.5000 inches PDF: 63-3052_dyno 63-3052_inst

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle. Additional Attributes: GTIN: 00024844372956 Clamp Material: Stainless Steel Clamp Style: Worm Gear Clamps Included: 8 Coupler Color/Finish: Black Couplers Included: 2 Estimated Horsepower Gain: 50.71 HP @ 5340 RPM Horse Power Increase: 51 HP Intake Pipe Color / Finish: Black Intake Pipe Material: Carbon Fiber Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Corrugated Package Type: Box Product Style: 57 Series FIPK Replacement Filter: RP-5285 RPM: 5340 Street Legal In All US States: Yes TUV Approved (Europe): No Type: Gen II Warranty: 1,000,000 Miles/10 Year Weight: 10.9 lb (4.9 kg) Air Box Included: No Air Filter Color: Red Air Filter Material: Cotton Gauze Air Filter Outlet Shape: Round Air Filter Washable: Yes CARB EO Number: D-269-61 Clamp Color/Finish: Black Extened Information: Life Cycle Status: Available To Order Emissions : Emission verification to be determined in ACES, vehicle application data. Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 18.2500 x 18.2500 x 12.5000 inches PDF: 57-3090_dyno 57-3090_inst

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle. Additional Attributes: GTIN: 00024844361394 Air Box Included: No Air Filter Color: Red Air Filter Height: 6 in (152 mm) Air Filter Material: Cotton Gauze Air Filter Outlet Length: 1 in (25 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 6 in (152 mm) Air Filter Washable: Yes CARB EO Number: D-269-49 Clamp Color/Finish: Black Clamp Material: Stainless Steel Clamp Style: Regular Clamps Included: 5 Coupler Color/Finish: Black Couplers Included: 2 Estimated Horsepower Gain: 25.37 HP @ 4053 RPM Horse Power Increase: 25 HP Intake Pipe Color / Finish: Black Intake Pipe Material: Carbon Fiber Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Paperboard Package Type: Box Product Style: 57 Series FIPK Replacement Filter: RP-5168 RPM: 4053 Street Legal In All US States: Yes TUV Approved (Europe): No Type: Gen II Warranty: 1,000,000 Miles/10 Year Weight: 8.8 lb (4 kg) Extened Information: Life Cycle Status: Available To Order Emissions : Emission verification to be determined in ACES, vehicle application data. Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 22.2500 x 14.2500 x 12.5000 inches PDF: 57-3079_dyno 57-3079_inst

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle. Additional Attributes: GTIN: 00024844044976 Air Box Included: No Air Filter Color: Red Air Filter Height: 7 in (178 mm) Air Filter Material: Cotton Gauze Air Filter Outlet Length: 3.5 in (89 mm) Air Filter Outlet Shape: Round Air Filter Outlet Width: 3.5 in (89 mm) Air Filter Washable: Yes CARB EO Number: D-269-14 Clamp Color/Finish: Natural Clamp Material: Stainless Steel Clamp Style: Regular Clamps Included: 6 Coupler Color/Finish: Black Couplers Included: 3 Estimated Horsepower Gain: 13.39 HP @ 5363 RPM Horse Power Increase: 13 HP Intake Pipe Color / Finish: Black Intake Pipe Material: High-Density Cross-Linked Polyethylene Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required Mounting Hardware Included: Yes Oil Included: Filter Is Pre-Oiled Package Material: Paperboard Package Type: Box Product Style: 57 Series FIPK Replacement Filter: RF-1033 RPM: 5363 Street Legal In All US States: Yes TUV Approved (Europe): No Type: Gen II Warranty: 1,000,000 Miles/10 Year Weight: 8.5 lb (3.8 kg) Extened Information: Life Cycle Status: Available To Order Emissions : Emission verification to be determined in ACES, vehicle application data. Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 35.5000 x 13.2500 x 10.5000 inches PDF: 57-1508_dyno 57-1508_inst

Light weight yet durable, K&N's Generation 2 Carbon Fiber Air Boxes are a must for any racer currently using traditional multi-Siamese stacks. Constructed from ultra-lightweight carbon fiber these filters provide ample air flow for your racing needs. They come with air horn seals to provide better sealing and easy installation. As with all K&N air filters, Generation 2 Carbon Fiber Air Boxes are washable and reusable. Simply use K&N cleaner and oil to service your filter. Additional Attributes: GTIN: 00024844363206 Filter Re-Oiling Amount: 4.56 oz (135 ml) Flange Angle: 0 degrees Flange Length: 0 in (0 mm) Flanges: None Frame Design: Flexible Height: 4.125 in (105 mm) Item Type: High Performance Oil Included: Filter Is Pre-Oiled Package Contents: 1 Air Filter Package Material: Corrugated Package Quantity: 1 Package Type: Box Pre-Screened: No Product Style: Unique Universal Air Filter Washable: Yes Weight: 7 lb (3.2 kg) Air Filter Shape: Rectangular Filter Material: Cotton Gauze Extened Information: Life Cycle Status: Available To Order Emissions : Emission verification to be determined in ACES, vehicle application data. Packaging: Quantity of Each: 1 Package UOM: EA Dimension: 24.3750 x 18.3750 x 10.7500 inches