RockJock

RockJocks extra long D.O.T. approved stainless braided extended brake line kit for the front of the 2007-2018 Jeep JK Wranglers is intended to allow the line to be routed and anchored by the coil spring. This line kit includes the two 35 in. long hoses, 4 copper banjo bolt washers, frame tabs, and clips. Sold as a pair.This Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2016 Jeep Wrangler 75th Anniversary 2007-2017 Jeep Wrangler Rubicon 2007-2017 Jeep Wrangler Sahara 2010-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2011 Jeep Wrangler Unlimited 70th Anniversary 2016 Jeep Wrangler Unlimited 75th Anniversary 2018 Jeep Wrangler Unlimited Moab 2007-2017 Jeep Wrangler Unlimited Rubicon 2007-2017 Jeep Wrangler Unlimited Sahara 2010-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2007-2010 Jeep Wrangler Unlimited X 2007-2010 Jeep Wrangler X 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

RockJock's Geometry Correction Axle Bracket Kit for the rear Trac Bar of 2021-up Broncos is a highly recommended upgrade for lifted vehicles to relocate the axle housing mounting point of the rear trac bar upward, correcting the location of the trac bar mounting point. You'll find this bracket necessary on lifted vehicles that feature heavy additions above the roof or behind the tailgate. The addition of this bracket will restore rear suspension lateral geometry and produce better overall vehicle handling by raising the rear suspension roll center to bring it closer to the vehicle's center of gravity. This kit is completely bolt-on, works with factory or aftermarket trac bars, such as our RJ-183400-101 Johnny Joint adjustable trac bar) and very simply installs onto the factory axle housing. A rear brake line relocation tab is included to provide clearance for the new trac bar bolt location. Bracket is finished in semi-gloss black and includes all necessary hardware for installation.This Part Fits: Year Make Model Submodel 2021-2024 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2024 Ford Bronco Big Bend 2021-2024 Ford Bronco Black Diamond 2022-2024 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023-2024 Ford Bronco Heritage Edition 2023-2024 Ford Bronco Heritage Limited Edition 2021-2024 Ford Bronco Outer Banks 2022-2024 Ford Bronco Raptor 2021-2024 Ford Bronco Wildtrak

RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is designed to fit the frame side of the 2021 and up Bronco's rear control arms and feature a narrow 2 1/2 in. diameter joint body, fitted with a zerk fitting for greasing, 2.3 in. of 1 1/4 in.-12 left hand threads on the shank, and a 74mm mounting width ball with a 16mm thru bolt hole. Finished in gold zinc plating.

RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is designed to fit the frame side of the 2021 and up Bronco's rear control arms and feature a narrow 2 1/2 in. diameter joint body, fitted with a zerk fitting for greasing, 2.3 in. of 1 1/4 in.-12 right hand threads on the shank, and a 74mm mounting width ball with a 16mm thru bolt hole. Finished in gold zinc plating.

RockJock 2021+ Bronco Johnny Joint Rear Control Arm Set Adjustable Steel

RockJock's rear lower control arms for 2021-up Broncos provide length adjustability via RH/LH threaded adjuster ends, allowing pinion angle to be adjusted after the installation of a suspension lift without either end of the arm having to be removed from the vehicle! Additionally the adjustable feature of our arms allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future. Arms are fabricated from 1.625 in. o.d. x .250 in. wall DOM steel tubing. For maximum articulation, arms feature forged 2 1/2 in. Johnny Joint rod ends on both ends with 1 1/4 in.-14 RH/LH threads and jam nuts. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating.This Part Fits: Year Make Model Submodel 2021-2024 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2024 Ford Bronco Big Bend 2021-2024 Ford Bronco Black Diamond 2022-2024 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023-2024 Ford Bronco Heritage Edition 2023-2024 Ford Bronco Heritage Limited Edition 2021-2024 Ford Bronco Outer Banks 2022-2024 Ford Bronco Raptor 2021-2024 Ford Bronco Wildtrak

RockJock's Johnny Joint adjustable rear trac bar for 2021-up Bronco features precise bends for a perfect fit into stock or lifted vehicles as well as vehicles with larger, aftermarket differentials. For maximum articulation, this trac bar features greasable, narrow Johnny Joint rod ends at both ends, the axle housing end being adjustable. Use the adjustability of this bar to center the axle under the chassis as well as to improve driveshaft-to-fuel-tank clearance. This bar may be used with our without our RJ-181400-101 Trac Bar Relocation Bracket. Bar is fabricated from 1 3/8 in. x .120 in. wall DOM tubing and is finished insemi-gloss black powder coat on the bar and gold zinc plating on the Johnny Joint adjuster end.This Part Fits: Year Make Model Submodel 2021-2024 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2024 Ford Bronco Big Bend 2021-2024 Ford Bronco Black Diamond 2022-2024 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023-2024 Ford Bronco Heritage Edition 2023-2024 Ford Bronco Heritage Limited Edition 2021-2024 Ford Bronco Outer Banks 2022-2024 Ford Bronco Raptor 2021-2024 Ford Bronco Wildtrak

RockJock's rear upper control arms for 2021-up Broncos provide length adjustability via RH/LH threaded adjuster ends, allowing pinion angle to be adjusted after the installation of a suspension lift without either end of the arm having to be removed from the vehicle! Additionally the adjustable feature of our arms allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future. Arms are fabricated from 1.625 in. o.d. x .250 in. wall DOM steel tubing. For maximum articulation, arms feature forged 2 1/2 in. Johnny Joint rod ends on both ends with 1 1/4 in.-14 RH/LH threads and jam nuts. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating.This Part Fits: Year Make Model Submodel 2021-2024 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2024 Ford Bronco Big Bend 2021-2024 Ford Bronco Black Diamond 2022-2024 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023-2024 Ford Bronco Heritage Edition 2023-2024 Ford Bronco Heritage Limited Edition 2021-2024 Ford Bronco Outer Banks 2022-2024 Ford Bronco Raptor 2021-2024 Ford Bronco Wildtrak

RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is designed to fit the axle side of the 2021 and up Bronco's rear control arms and feature a 2 1/2 in. diameter joint body, fitted with a zerk fitting for greasing, 2.3 in. of 1 1/4 in.-12 left hand threads on the shank, and a 70mm mounting width ball with a 16mm thru bolt hole. Finished in gold zinc plating.

RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is designed to fit the axle side of the 2021 and up Bronco's rear control arms and feature a 2 1/2 in. diameter joint body, fitted with a zerk fitting for greasing, 2.3 in. of 1 1/4 in.-12 right hand threads on the shank, and a 70mm mounting width ball with a 16mm thru bolt hole. Finished in gold zinc plating.

RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is designed to fit the axle side of the 2021 and up Bronco's rear control arms and feature a narrow 2 1/2 in. diameter joint body, fitted with a zerk fitting for greasing, 2.3 in. of 1 1/4 in.-12 left hand threads on the shank, and a 70mm mounting width ball with a 16mm thru bolt hole. Finished in gold zinc plating.

RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is designed to fit the axle side of the 2021 and up Bronco's rear control arms and feature a narrow 2 1/2 in. diameter joint body, fitted with a zerk fitting for greasing, 2.3 in. of 1 1/4 in.-12 right hand threads on the shank, and a 70mm mounting width ball with a 16mm thru bolt hole. Finished in gold zinc plating.

RockJock's narrow style weld-on Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The 2 1/2 in. narrow style outer shell is weldable CNC machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint's 70mm mounting width ball with a 16mm thru bolt hole is designed to fit the axle side of the 2021 and up Bronco's rear control arms.

RockJock's weld-on Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable 0.180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint's 70mm mounting width ball with a 16mm thru bolt hole is designed to fit the axle side of the 2021 and up Bronco's rear control arms.

RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is designed to fit the frame side of the 2021 and up Bronco's rear control arms and feature a 2 1/2 in. diameter joint body, fitted with a zerk fitting for greasing, 2.3 in. of 1 1/4 in.-12 left hand threads on the shank, and a 74mm mounting width ball with a 16mm thru bolt hole. Finished in gold zinc plating.

RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is designed to fit the frame side of the 2021 and up Bronco's rear control arms and feature a 2 1/2 in. diameter joint body, fitted with a zerk fitting for greasing, 2.3 in. of 1 1/4 in.-12 right hand threads on the shank, and a 74mm mounting width ball with a 16mm thru bolt hole. Finished in gold zinc plating.

RockJock's weld-on Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable 0.180 in. wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint's 74mm mounting width ball with a 16mm thru bolt hole is designed to fit the frame side of the 2021 and up Bronco's rear control arms.

RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is designed to fit the upper lower mounting point on the 2021 and up Bronco's rear trac bar and features a narrow 2 1/2 in. diameter joint body, fitted with a zerk fitting for greasing, 2.3 in. of 1 in.-14 left hand threads on the shank, and a 55mm mounting width ball with a 16mm thru bolt hole. Finished in gold zinc plating.

RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is designed to fit the upper lower mounting point on the 2021 and up Bronco's rear trac bar and features a narrow 2 1/2 in. diameter joint body, fitted with a zerk fitting for greasing, 2.3 in. of 1 in.-14 right hand threads on the shank, and a 55mm mounting width ball with a 16mm thru bolt hole. Finished in gold zinc plating.

RockJock's narrow style weld-on Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The 2 1/2 in. narrow style outer shell is weldable CNC machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint's 55mm mounting width ball with a 16mm thru bolt hole is designed to fit the axle side of the 2021 and up Bronco's rear trac bar.

RockJock 2021+ Bronco RockNut Billet Aluminum Johnny Joint Rear Control Arm Set Double Adjustable

RockJock's RockNut Billet Aluminum Johnny Joint Rear Lower Control Arm Set for the 2021-up Bronco provides you with extremely heavy duty, adjustable length control arms to replace your factory control arms. Adjustable control arms are a must for aligning lifted vehicles to get your pinion angle specs. in check - and double adjustable arms make this job that much easier because neither end of the arm has to be removed from the vehicle for adjustment! These arms are CNC machined from 7075-T6 aluminum, feature our patent pending RockNut locking nut technology and our 2 1/2 in. Johnny Joints with massive 1 1/4 in. RH and LH threads! Arms are fully greasable, fully adjustable and feature machined-in wrench flats. Finished in clear anodize on the arms and gold zinc plating on the Johnny Joint ends.This Part Fits: Year Make Model Submodel 2021-2024 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2024 Ford Bronco Big Bend 2021-2024 Ford Bronco Black Diamond 2022-2024 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023-2024 Ford Bronco Heritage Edition 2023-2024 Ford Bronco Heritage Limited Edition 2021-2024 Ford Bronco Outer Banks 2022-2024 Ford Bronco Raptor 2021-2024 Ford Bronco Wildtrak

RockJock's RockNut Billet Aluminum Johnny Joint Rear Upper Control Arm Set for the 2021-up Bronco provides you with extremely heavy duty, adjustable length control arms to replace your factory control arms. Adjustable control arms are a must for aligning lifted vehicles to get your pinion angle specs. in check - and double adjustable arms make this job that much easier because neither end of the arm has to be removed from the vehicle for adjustment! These arms are CNC machined from 7075-T6 aluminum, feature our patent pending RockNut locking nut technology and our 2 1/2 in. Johnny Joints with massive 1 1/4 in. RH and LH threads! Arms are fully greasable, fully adjustable and feature machined-in wrench flats. Finished in clear anodize on the arms and gold zinc plating on the Johnny Joint ends.This Part Fits: Year Make Model Submodel 2021-2024 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2024 Ford Bronco Big Bend 2021-2024 Ford Bronco Black Diamond 2022-2024 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023-2024 Ford Bronco Heritage Edition 2023-2024 Ford Bronco Heritage Limited Edition 2021-2024 Ford Bronco Outer Banks 2022-2024 Ford Bronco Raptor 2021-2024 Ford Bronco Wildtrak

RockJock's Antirock front sway bar kit for 2021-up Broncos (with non-electric factory front sway bars) provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, fabricated steel arms, fabricaed steel frame brackets, sway bar bushings, hardware, and step-by-step instructions. Sway bar bolts directly onto the bottom of the chassis and directly replaces the factory unit. Sway bar links attach to the lower control arms using billet steel mounts provided in the kit. The RockJock Antirock sway bar does not need to be disconnected for off-road use. NOTE: ONLY USE THIS KIT on vehicles that are NOT equipped with a factory electronic disconnect sway bar! This kit is ONLY for use on vehicles with a standard, base sway bar. CAUTION: Vehicles will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock sway bar.This Part Fits: Year Make Model Submodel 2021-2024 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2024 Ford Bronco Big Bend 2021-2024 Ford Bronco Black Diamond 2022-2024 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023-2024 Ford Bronco Heritage Edition 2023-2024 Ford Bronco Heritage Limited Edition 2021-2024 Ford Bronco Outer Banks 2022-2024 Ford Bronco Raptor 2021-2024 Ford Bronco Wildtrak

This pair of RockJock front coil springs will provide 3 1/2 inches of lift in JT Gladiator applications that feature the diesel engine. These springs directly replace factory springs and are designed to work with RockJock Johnny Joint suspension systems or other manufacturer's lift kits and provide improved ride quality and height control. Finish is gloss black powder coat. Extensive research was done by RockJock to develop the perfect spring rate and quality of the coil springs. The results: they provide the best in comfortable ride and excellent performance off-road. If you need help choosing the correct springs for your Jeep - just call the RockJock sales staff!This Part Fits: Year Make Model Submodel 2021 Jeep Wrangler 80th Anniversary 2021,2023 Jeep Wrangler Freedom 2021 Jeep Wrangler Islander 2018-2024 Jeep Wrangler Rubicon 2018-2024 Jeep Wrangler Sport 2018-2024 Jeep Wrangler Sport S 2021 Jeep Wrangler Unlimited 80th Anniversary 2021,2023 Jeep Wrangler Unlimited Freedom 2021-2023 Jeep Wrangler Unlimited High Altitude 2021-2024 Jeep Wrangler Unlimited High Altitude 4xe 2022-2023 Jeep Wrangler Unlimited High Tide 2021 Jeep Wrangler Unlimited Islander 2018-2019 Jeep Wrangler Unlimited Moab 2018-2024 Jeep Wrangler Unlimited Rubicon 2021-2024 Jeep Wrangler Unlimited Rubicon 392 2021-2024 Jeep Wrangler Unlimited Rubicon 4xe 2018-2024 Jeep Wrangler Unlimited Sahara 2021-2024 Jeep Wrangler Unlimited Sahara 4xe 2021-2023 Jeep Wrangler Unlimited Sahara Altitude 2018-2023 Jeep Wrangler Unlimited Sport 2021-2023 Jeep Wrangler Unlimited Sport Altitude 2018-2024 Jeep Wrangler Unlimited Sport S 2024 Jeep Wrangler Unlimited Sport S 4xe 2021-2024 Jeep Wrangler Unlimited Willys 2023-2024 Jeep Wrangler Unlimited Willys 4xe 2021-2024 Jeep Wrangler Unlimited Willys Sport 2021-2024 Jeep Wrangler Willys 2021-2024 Jeep Wrangler Willys Sport

RockJocks main leaf spring eye bushing (the bushings at the inner ends of the front and rear springs) replacement kit for 1976-1986 Jeep CJ vehicles replaces worn, stock rubber bushings with Energy Suspension fluted urethane bushings and zerk fitted hardware for greasing. Our main eye bushing kit improves suspension performance on and off the road and the urethane material resists rotting, cracking and damage from the weather. Kit will replace all 4 main eye bushings on one vehicle.This Part Fits: Year Make Model Submodel 1976-1983 Jeep CJ5 Base 1977-1980 Jeep CJ5 Golden Eagle 1980-1983 Jeep CJ5 Laredo 1982-1983 Jeep CJ5 Limited 1976-1983 Jeep CJ5 Renegade 1976-1986 Jeep CJ7 Base 1977-1979 Jeep CJ7 Golden Eagle 1980 Jeep CJ7 Golden Hawk 1980-1983,1985-1986 Jeep CJ7 Laredo 1982-1983 Jeep CJ7 Limited 1976-1986 Jeep CJ7 Renegade 1981-1985 Jeep Scrambler Base 1985 Jeep Scrambler Laredo 1985 Jeep Scrambler Renegade 1982-1983 Jeep Scrambler SL 1982-1984 Jeep Scrambler SR

RockJocks greasable front shackles for 1976-1986 Jeep CJ vehicles directly replace the stock shackles with our new, heavy duty units. Our shackles feature laser cut, 1/4 in. thick steel side plates, Energy Suspension fluted urethane bushings, grade 8 greasable bolts that feature zerk fittings on their heads for greasing of the bushings, and center bolt-in sleeves for added rigidity. Shackles are 4 1/4 in. tall from bolt center to bolt center (which is approximately 3/4 in. taller than stock). Finished in corrosion proof gold zinc plating and sold in pairs.This Part Fits: Year Make Model Submodel 1976-1983 Jeep CJ5 Base 1977-1980 Jeep CJ5 Golden Eagle 1980-1983 Jeep CJ5 Laredo 1982-1983 Jeep CJ5 Limited 1976-1983 Jeep CJ5 Renegade 1976-1986 Jeep CJ7 Base 1977-1979 Jeep CJ7 Golden Eagle 1980 Jeep CJ7 Golden Hawk 1980-1983,1985-1986 Jeep CJ7 Laredo 1982-1983 Jeep CJ7 Limited 1976-1986 Jeep CJ7 Renegade 1981-1985 Jeep Scrambler Base 1985 Jeep Scrambler Laredo 1985 Jeep Scrambler Renegade 1982-1983 Jeep Scrambler SL 1982-1984 Jeep Scrambler SR

RockJocks greasable front tow shackles for 1976-1986 Jeep CJ vehicles directly replace the stock shackles with our new, heavy duty units. Our shackles feature laser cut, 1/4 in. thick steel side plates, Energy Suspension fluted urethane bushings, grade 8 greasable bolts that feature zerk fittings on their heads for greasing of the bushings, and center bolt-in sleeves for added rigidity. Additionally, our tow shackles feature for quick-disconnect mounting of common tow bars! Shackles are 4 1/4 in. tall from bolt center to bolt center (which is approximately 3/4 in. taller than stock). Finished in corrosion proof gold zinc plating and sold in pairs. Tow bar connecting pins and clips included!This Part Fits: Year Make Model Submodel 1976-1983 Jeep CJ5 Base 1977-1980 Jeep CJ5 Golden Eagle 1980-1983 Jeep CJ5 Laredo 1982-1983 Jeep CJ5 Limited 1976-1983 Jeep CJ5 Renegade 1976-1986 Jeep CJ7 Base 1977-1979 Jeep CJ7 Golden Eagle 1980 Jeep CJ7 Golden Hawk 1980-1983,1985-1986 Jeep CJ7 Laredo 1982-1983 Jeep CJ7 Limited 1976-1986 Jeep CJ7 Renegade 1981-1985 Jeep Scrambler Base 1985 Jeep Scrambler Laredo 1985 Jeep Scrambler Renegade 1982-1983 Jeep Scrambler SL 1982-1984 Jeep Scrambler SR

RockJocks greasable rear shackles for 1976-1986 Jeep CJ vehicles directly replace the stock shackles with our new, heavy duty units. Our shackles feature laser cut, 1/4 in. thick steel side plates, Energy Suspension fluted urethane bushings, grade 8 greasable bolts that feature zerk fittings on their heads for greasing of the bushings, and center bolt-in sleeves for added rigidity. Shackles are 4 1/4 in. tall from bolt center to bolt center (which is approximately 3/4 in. taller than stock). Finished in corrosion proof gold zinc plating and sold in pairs.This Part Fits: Year Make Model Submodel 1976-1983 Jeep CJ5 Base 1977-1980 Jeep CJ5 Golden Eagle 1980-1983 Jeep CJ5 Laredo 1982-1983 Jeep CJ5 Limited 1976-1983 Jeep CJ5 Renegade 1976-1986 Jeep CJ7 Base 1977-1979 Jeep CJ7 Golden Eagle 1980 Jeep CJ7 Golden Hawk 1980-1983,1985-1986 Jeep CJ7 Laredo 1982-1983 Jeep CJ7 Limited 1976-1986 Jeep CJ7 Renegade 1981-1985 Jeep Scrambler Base 1985 Jeep Scrambler Laredo 1985 Jeep Scrambler Renegade 1982-1983 Jeep Scrambler SL 1982-1984 Jeep Scrambler SR

RockJocks Antirock(R) sway bar end links include 10 1/2 in. link rods that are threaded 1/2 in.-20 RH on one end and 1/2 in.-20 LH on the other end, the corresponding RH and LH 1/2 in.-20 female heim joints with 1/2 in.-20 studs in the ball socket, jam nuts and nyloc nuts for the heim joint studs.

RockJock's Adjustable Sway Bar End Link Set features 10 1/2 in. long link rods and their high-end sealed rod ends. The rods feature 2 5/8 in. of 1/2 in.-20 LH thread and 2 5/8 in. of 1/2 in.-20 RH thread, providing adjustment as-is and extra thread, allowing you to cut them shorter as deemed necessary by your application. Link sets are included in their Antirock Sway Bar Kits, but are able to be used universally in many applications to replace non-adjustable sway bar links. Additionally, if you have changed the lift amount on your vehicle you may need a different length of sway bar links to accommodate your new lift. You can simply buy a complete new link set to accommodate your needs. The rod ends in this kit feature 12mm-1.75 RH thread studs and locking nuts and jam nuts are included. These links and sealed rod ends are a direct replacement for link sets that feature heim joints.

RockJock's Adjustable Sway Bar End Link Set features 12 1/2 in. long link rods and premium studded heim joints. The rods feature 2 5/8 in. of 1/2 in.-20 LH thread and 2 5/8 in. of 1/2 in.-20 RH thread, providing adjustment as-is and extra thread, allowing you to cut them shorter as deemed necessary by your application. Link sets are included in our Antirock Sway Bar Kits, but are able to be used universally in many applications to replace non-adjustable sway bar links. Additionally, if you have changed the lift amount on your vehicle you may need a different length of sway bar links to accommodate your new lift. You can simply buy a complete new link set to accommodate your needs. The heim joints in this kit feature 1/2 in.-20 RH thread studs and nyloc nuts and jam nuts are included.

RockJock's Adjustable Sway Bar End Link Set features 12 1/2 in. long link rods and their high-end sealed rod ends. The rods feature 2 5/8 in. of 1/2 in.-20 LH thread and 2 5/8 in. of 1/2 in.-20 RH thread, providing adjustment as-is and extra thread, allowing you to cut them shorter as deemed necessary by your application. Link sets are included in their Antirock Sway Bar Kits, but are able to be used universally in many applications to replace non-adjustable sway bar links. Additionally, if you have changed the lift amount on your vehicle you may need a different length of sway bar links to accommodate your new lift. You can simply buy a complete new link set to accommodate your needs. The rod ends in this kit feature 12mm-1.75 RH thread studs and locking nuts and jam nuts are included. These links and sealed rod ends are a direct replacement for link sets that feature heim joints.

RockJocks Antirock(R) sway bar end links include 14 in. link rods that are threaded 1/2 in.-20 RH on one end and 1/2 in.-20 LH on the other end, the corresponding RH and LH 1/2 in.-20 female heim joints with 1/2 in.-20 studs in the ball socket, jam nuts and nyloc nuts for the heim joint studs.

RockJock's Adjustable Sway Bar End Link Set features 14 in. long link rods and their high-end sealed rod ends. The rods feature 4 1/4 in. of 1/2 in.-20 LH thread and 2 5/8 in. of 1/2 in.-20 RH thread, providing adjustment as-is and extra thread, allowing you to cut them shorter as deemed necessary by your application. Link sets are included in their Antirock Sway Bar Kits, but are able to be used universally in many applications to replace non-adjustable sway bar links. Additionally, if you have changed the lift amount on your vehicle you may need a different length of sway bar links to accommodate your new lift. You can simply buy a complete new link set to accommodate your needs. The rod ends in this kit feature 12mm-1.75 RH thread studs and locking nuts and jam nuts are included. These links and sealed rod ends are a direct replacement for link sets that feature heim joints.

RockJocks Antirock(R) sway bar end links include 6 1/2 in. link rods that are threaded 1/2 in.-20 RH on one end and 1/2 in.-20 LH on the other end, the corresponding RH and LH 1/2 in.-20 female heim joints with 1/2 in.-20 studs in the ball socket, jam nuts and nyloc nuts for the heim joint studs.