The AEM 21-8105DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Mustang models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8105DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1987-1993 Ford Mustang GT 1987-1993 Ford Mustang LX 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R

AEM Dryflow Pre-Filters are manufactured from a durable micro-screen material and pretreated with a proprietary hydrophobic process designed to prevent splashes of water or mud from saturating your Dryflow air filter. AEM Dryflow Pre-filters also stop small dirt particles; yet add little restriction.

AEM Brute Force Dryflow Air Filters are specially designed for tough off-road applications. They provide outstanding levels of filtration efficiency and capacity. AEM Brute Force Air Filters are oil-free and their synthetic media is incredibly easy to clean. Even more impressive, they are so durable that they maintain their shape under even the most severe abuse.

AEM Air Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These air intakes usually include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's, and Brute Force HD intakes for diesel applications.Installation InstructionsThis Part Fits: Year Make Model Submodel 2000-2002 Saturn SC2 Base

The AEM 21-8314DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Jeep Wrangler models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8314DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2007-2011 Jeep Wrangler Rubicon 2007-2011 Jeep Wrangler Sahara 2010-2011 Jeep Wrangler Sport 2011 Jeep Wrangler Unlimited 70th Anniversary 2007-2011 Jeep Wrangler Unlimited Rubicon 2007-2011 Jeep Wrangler Unlimited Sahara 2010-2011 Jeep Wrangler Unlimited Sport 2007-2010 Jeep Wrangler Unlimited X 2007-2010 Jeep Wrangler X

AEM offers a variety of promotional accessories: Catalogs, Decals and many Jobber Kits.

AEM Air Straightener

The AEM 21-766C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Spark models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor and engine vent tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-766C vehicle applications to determine the legal status for each vehicle.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2015 Chevrolet Spark LS 2013-2015 Chevrolet Spark LT

AEM intake tubes are engineered for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. The precise mandrel-bent aluminum tubing keeps air flow uniform, smooth and free-flowing. Made from high-quality 6063 aluminum alloy, this tube can be cut, spliced or welded to fit a wide spectrum of custom applications while withstanding high heat and stress.Technical Drawing

AEM intake tubes are engineered for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. The precise mandrel-bent aluminum tubing keeps air flow uniform, smooth and free-flowing. Made from high-quality 6063 aluminum alloy, this tube can be cut, spliced or welded to fit a wide spectrum of custom applications while withstanding high heat and stress.Technical Drawing

AEM Dryflow Pre-Filters are manufactured from a durable micro-screen material and pretreated with a proprietary hydrophobic process designed to prevent splashes of water or mud from saturating your Dryflow air filter. AEM Dryflow Pre-filters also stop small dirt particles; yet add little restriction.

The AEM 21-864C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the factory mass airflow sensor and vent hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-864C vehicle applications to determine the legal status for each vehicle.User 1User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2019 Toyota Corolla L 2019 Toyota Corolla LE 2019 Toyota Corolla LE Eco 2019 Toyota Corolla SE 2019 Toyota Corolla XLE 2019 Toyota Corolla XSE

AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration.This Part Fits: Year Make Model Submodel 2017-2020,2022-2023 Subaru BRZ Limited 2017-2019,2022-2023 Subaru BRZ Premium 2019 Subaru BRZ Series.Gray 2017 Subaru BRZ Series.Yellow 2018,2020 Subaru BRZ TS 2017-2020 Toyota 86 Base 2018-2020 Toyota 86 GT 2020 Toyota 86 Hakone Edition 2017 Toyota 86 Special Edition 2019 Toyota 86 TRD Special Edition 2022-2023 Toyota GR86 Base 2022-2023 Toyota GR86 Premium

The AEM 21-8029C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Camaro models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate a replacement washer bottle as well as the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8029C vehicle applications to determine the legal status for each vehicle.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2010-2013 Chevrolet Camaro SS 2012-2013 Chevrolet Camaro ZL1

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2019 Hyundai Sonata Limited 2.0T 2019-2020 Kia Optima SX

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system from the factory fresh air inlets. through replacement air duct and into a roto-molded, aerodynamic AEM air box containing an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance.The cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.User 1Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2011 BMW 1 Series M Base 2008-2010 BMW 135i Base 2007-2010 BMW 335i Base 2009-2010 BMW 335i xDrive Base 2011-2013 BMW 335is Base 2007-2008 BMW 335xi Base 2008-2010 BMW 535i Base 2009-2010 BMW 535i xDrive Base 2010-2011 BMW Z4 sDrive30i 2010-2016 BMW Z4 sDrive35i 2011-2016 BMW Z4 sDrive35is

The AEM 21-8123DC Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Mustang models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a replacement AEM airbox with a logo embossed aluminum lid which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor, crankcase vent hose, brake booster line as well as a replacement AEM filter minder. The oval cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8123DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsInstallation InstructionsUser 1This Part Fits: Year Make Model Submodel 2011-2014 Ford Mustang Base 2013 Ford Mustang Boss 302

AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration.

AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration. Replacement air filters for street vehicles come with a lifetime limited warranty. Other air filters come with a one year limited warranty.This Part Fits: Year Make Model Submodel 2013-2015 Ford C-Max Energi SEL 2013-2015 Ford C-Max Hybrid SE 2013-2015 Ford C-Max Hybrid SEL 2013-2019 Ford Escape SE 2013,2018-2019 Ford Escape SEL 2013-2019 Ford Escape Titanium 2016-2018 Ford Focus RS 2007-2018 Ford Focus S 2007-2018 Ford Focus SE 2009-2012,2017-2018 Ford Focus SEL 2007-2011 Ford Focus SES 2013-2018 Ford Focus ST 2012-2018 Ford Focus Titanium 2014-2016 Ford Transit Connect Titanium 2014-2016 Ford Transit Connect XL 2014-2016 Ford Transit Connect XLT 2015,2019 Lincoln MKC Base 2015-2019 Lincoln MKC Black Label 2016-2018 Lincoln MKC Premiere 2016-2019 Lincoln MKC Reserve 2016-2019 Lincoln MKC Select

AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration. Replacement air filters for street vehicles come with a lifetime limited warranty. Other air filters come with a one year limited warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003,2005-2010 Dodge Ram 2500 Laramie 2003-2010 Dodge Ram 2500 SLT 2006-2007 Dodge Ram 2500 Sport 2003-2010 Dodge Ram 2500 ST 2008-2010 Dodge Ram 2500 SXT 2010 Dodge Ram 2500 TRX 2006-2007 Dodge Ram 2500 TRX4 2003-2010 Dodge Ram 3500 Laramie 2003-2010 Dodge Ram 3500 SLT 2006-2007 Dodge Ram 3500 Sport 2003-2010 Dodge Ram 3500 ST 2008-2010 Dodge Ram 3500 SXT 2007 Dodge Ram 3500 TRX4 2010 Dodge Ram 4500 Laramie 2010 Dodge Ram 4500 SLT 2010 Dodge Ram 4500 ST 2010 Dodge Ram 5500 Laramie 2010 Dodge Ram 5500 SLT 2010 Dodge Ram 5500 ST 2011-2012 Ram 2500 Laramie 2011-2012 Ram 2500 Laramie Longhorn 2012 Ram 2500 Outdoorsman 2011-2012 Ram 2500 SLT 2011-2012 Ram 2500 ST 2011-2012 Ram 3500 Laramie 2011-2012 Ram 3500 Laramie Longhorn 2011-2012 Ram 3500 SLT 2011-2012 Ram 3500 ST 2011-2012 Ram 4500 Laramie 2011-2012 Ram 4500 SLT 2011-2012 Ram 4500 ST 2011-2012 Ram 5500 Laramie 2011-2012 Ram 5500 SLT 2011-2012 Ram 5500 ST

AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration. Replacement air filters for street vehicles come with a lifetime limited warranty. Other air filters come with a one year limited warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013 Chevrolet Corvette 427 2008 Chevrolet Corvette 427 Limited Edition Z06 2008-2013 Chevrolet Corvette Base 2010-2013 Chevrolet Corvette Grand Sport 2006-2013 Chevrolet Corvette Z06 2011 Chevrolet Corvette Z06 Carbon 2009-2013 Chevrolet Corvette ZR1

AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration.

The AEM bracket is designed to be welded onto air intake tubes for racers, builders and fabricators to create secure custom ducting for turbocharger systems, air intakes and exhausts. The generous 12 inch length of 6063 aluminum alloy allows plenty of room for the bracket to be bent and trimmed in any way to mount an aluminum tube to a vehicle chassis at the slotted end with a bolt.Technical Drawing

AEM Cat Back Exhaust systems provide performance and power with a sporty sound. They are designed to enhance the use of aftermarket air intake systems and like AEM air intake systems they are designed to perform for the life of your vehicle. The system's exhaust tips have an OEM look and quality. AEM Cat Back Exhausts maintain clearances to critical systems and use OEM routing paths when possible, providing a performance exhaust with OEM fit and finish.User 1Technical BulletinTechnical BulletinInstallation InstructionsThis Part Fits: Year Make Model Submodel 2011-2014 Honda CR-Z Base 2011-2014 Honda CR-Z EX

AEM hump hoses allows for a flexible joint in between air intake and intercooler tubes. Made from durable EPDM rubber, this hump hose coupler can withstand high working temperatures and is corrosion resistant to fuel and oil.

AEM hump hoses allows for a flexible joint in between air intake and intercooler tubes. Made from durable EPDM rubber, this hump hose coupler can withstand high working temperatures and is corrosion resistant to fuel and oil.

AEM rubber hose adapters are designed to connect two different diameter air intake tubes for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. AEM hose adapters are constructed from durable EPDM rubber that withstands high heat and resists corrosion from fuel and oil.

AEM silicone hose couplers are designed to connect air intake tubes for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. AEM couplers are constructed from reinforced, multi-ply silicone that can withstand very high working temperatures.Technical Drawing

AEM silicone hose couplers are designed to connect air intake tubes for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. AEM couplers are constructed from reinforced, multi-ply silicone that can withstand very high working temperatures.Technical Drawing

AEM silicone hose couplers are designed to connect air intake tubes for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. AEM couplers are constructed from reinforced, multi-ply silicone that can withstand very high working temperatures.Technical Drawing

AEM rubber hose adapters are designed to connect two different diameter air intake tubes for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. AEM hose adapters are constructed from durable EPDM rubber that withstands high heat and resists corrosion from fuel and oil.

AEM silicone hose couplers are designed to connect air intake tubes for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. AEM couplers are constructed from reinforced, multi-ply silicone that can withstand very high working temperatures.Technical Drawing

AEM silicone hose couplers are designed to connect air intake tubes for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. AEM couplers are constructed from reinforced, multi-ply silicone that can withstand very high working temperatures.Technical Drawing

AEM rubber hose adapters are designed to connect two different diameter air intake tubes for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. AEM hose adapters are constructed from durable EPDM rubber that withstands high heat and resists corrosion from fuel and oil.Technical Drawing

AEM silicone hose couplers are designed to connect air intake tubes for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. AEM couplers are constructed from reinforced, multi-ply silicone that can withstand very high working temperatures.Technical Drawing

AEM Turbo Inlet Coupler Elbow (For Kit PN 21-719C)